Parts for Ge PGP990DEN2WW: 01 - Control Panel & Cooktop Parts

This replacement part is for a range, stove or oven. This knob is used to specify the settings desired on the oven while cooking or baking. The user might need a new knob if one is missing on the appliance, if the knob is stuck on a certain setting, if the knob itself is cracked or chipped, or if the plastic behind the knob is bent so that the knob will not stay on.This specific part is glossy, black, and made of hard plastic. This part is a genuine GE part and works with all major General Electric machines and brands. Installation is very simple and doesn't require any major tools or supplies. Most often the repair goes fairly quick as all that's needed is to pop the old knob off and make sure the new one is secure. This is an OEM part sourced directly from the manufacturer. It is sold individually. This part is compatible with machines from manufacturers like General Electric and and their brands like Hotpoint, RCA, and many others.

This surface burner cap is a genuine General Electric part, sold individually. It can be used as a replacement part for a gas range. This surface burner cap provides a covering for the burner of the gas range so that the infrastructure of the burner and the ignition are not damaged in the process of utilizing the burners.A surface burner cap might have to be replaced if it is lost, misplaced, or has suffered damage that prevents the component from protecting the burner and the ignition. Damage can include punctures, cracks, chips, or erosion to the material that weakens the ability of the component to protect the burner and ignition. If this damage occurs, the component should be removed and replaced by this genuine OEM replacement part. It is a simple replacement process that will require no special tools.This is an OEM part sourced directly from the manufacturer. It is sold individually. This surface burner cap is compatible with General Electric brand gas ranges.

This burner base secures a cooktop's surface burner assembly and helps position the burner head for consistent flame and stable cookware support. Replace a damaged base to restore proper burner alignment and consistent heating performance. What it does:

• Supports the surface burner head and cap so the flame stays centered under cookware
• Helps position and channel the burner assembly for even ignition and heating
• Restores stable seating when a warped or cracked base causes wobbling
• Common symptoms: uneven or wandering flame, loose/wobbly burner cap, or burner that won't light reliably

• Always disconnect power and shut off gas supply before servicing a gas cooktop
• Handle parts carefully to avoid bending tabs or stripping fasteners; keep removed screws and caps together
• After installation, verify proper burner alignment, ignition, and flame pattern before regular use

This ignition switch controls the spark to your gas burner or oven igniter so burners light reliably when you turn the control. Replacing a faulty switch can restore consistent ignition and safe operation. What it does:

• Sends the electrical/spark signal to the igniter so the burner lights
• Used when a control knob produces a spark to ignite a gas burner
• Common symptom: burner won't light or requires multiple attempts to ignite
• Common symptom: control produces no spark or feels intermittent when turned

• Disconnect power and shut off the gas supply before servicing
• Label and photograph wiring before disconnecting to ensure correct reconnection
• Inspect connector and mounting; test for continuity with a multimeter if troubleshooting

This replacement burner grate provides a stable, heat-resistant cooking surface and restores proper pot support on gas cooktops. The matte black finish resists staining and matches factory appearance for a seamless upgrade. What it does:

• Supports cookware over the burner so pots and pans sit level and heat evenly
• Directs and withstands burner heat while keeping flames properly contained under cookware
• Replaces warped, cracked, chipped, or missing grates that cause pots to wobble
• Helps restore safe, consistent cooking performance when existing grate is damaged

• Ensure the cooktop and burners are completely cool before removal or installation
• Lift out the old grate and set the new grate in place—no tools typically required
• Check burner caps are seated properly after reinstalling grates to ensure correct flame pattern
• Clean only with non-abrasive cleaners; avoid harsh chemicals that can damage the finish

This air shutter controls the air-to-gas mixture for a range/oven burner to help produce a proper flame for efficient cooking and reliable ignition. It's a simple replacement part that restores correct airflow at the burner inlet. What it does:

• Regulates burner airflow to help achieve a stable, properly-colored flame
• Helps correct weak, uneven, or yellow-tipped flames when misaligned or damaged
• Supports consistent ignition and steady burner performance
• Works at the burner/orifice connection to fine-tune combustion air

• Turn off gas supply and electrical power to the appliance before servicing
• Remove burner components as needed to access and replace the shutter; retain screws or clips
• Position the shutter per OEM orientation and secure; do not overtighten fasteners

This electrode clip secures the spark electrode/igniter assembly at the burner so the igniter stays in the correct position for reliable ignition. It replaces a worn or broken clip to restore stable spark alignment. What it does

• Holds the spark electrode or igniter in the proper position at the burner for consistent ignition.
• Helps prevent the electrode from shifting or touching other components, which can stop sparking.
• Commonly used when burners fail to ignite or sparking is intermittent due to a loose or damaged clip.
• Works with the appliance's ignition assembly to maintain correct gap and alignment.

• One electrode clip.

• Always disconnect power and shut off gas supply before accessing the burner or ignition assembly.
• Handle the electrode/igniter carefully—it's brittle and can crack if flexed or bumped.
• Access typically requires removing burner grates and burner caps; keep screws and small parts organized.
• If the electrode or wire shows heavy corrosion or damage, replace those components as well.

This venturi bracket secures the venturi tube to the cooktop assembly so the burner draws gas correctly. It restores proper alignment and helps ensure steady, even burner ignition and flame distribution. What it does:

• Holds the venturi/gas tube in the correct position relative to the burner and gas valve
• Prevents venturi tube movement that can cause weak or irregular flames
• Helps reduce clicking ignition or poor ignition caused by misaligned gas flow
• Keeps burner air/gas mixture stable for consistent cooking performance

• One venturi bracket

• Turn off the gas supply and unplug the appliance before servicing
• Minor disassembly of the cooktop or burner assembly is typically required
• Use basic hand tools and retain all fasteners for reassembly

This spark module controls ignition for your range's surface burners. When you turn a burner knob, it generates the high-voltage spark the electrodes need to ignite the gas quickly and consistently.

• Generates high-voltage pulses to the surface igniters to light the burner flame
• Activates when a burner switch/knob calls for ignition
• Routes spark output to the cooktop electrodes for reliable lighting
• Common failure signs: no spark on one or more burners, intermittent/weak spark, or continuous clicking

• Unplug the appliance and shut off the gas supply; allow the cooktop to cool
• Access the module per your model (often under the cooktop or behind a rear panel)
• Label and transfer wires one at a time from the old module to the new; ensure a solid ground and secure mounting
• Reassemble, restore power and gas, and test each burner for proper ignition