Parts for Ge ZGG542NCP1SS: 01 - Control Panel & Cooktop Parts

Replacement spit fork set for your grill rotisserie assembly. Secures meat to the rotisserie rod during cooking. Needed when original forks are lost.

This flat-head #10-32 screw secures appliance panels and components where a low-profile finish is needed. It restores proper fastening to loose or rattling parts for a secure fit and safer operation. What it does:

• Fastens trim, panels, brackets, and small assemblies using a #10-32 threaded hole
• Provides a low-profile head for flush mounting and reduced snagging
• Stops panel movement, vibration noise, and intermittent contact caused by loose fasteners
• Use when an existing screw is lost, stripped, or corroded

• Use the correct driver to avoid cam-out and head damage
• Tighten to a snug fit; do not over-torque to prevent thread or component damage
• Disconnect power and follow appliance safety guidelines when accessing internal components

This motor mounting bracket secures the appliance motor to the cabinet, restoring stable alignment and reducing vibration for reliable operation. It's a direct-fit replacement designed to hold the motor in the correct position and protect related components. What it does:

• Holds and supports the motor assembly in place to prevent movement during operation
• Maintains proper motor alignment for smooth belt/pulley engagement and efficient drive performance
• Helps reduce abnormal vibration and noise caused by a loose or damaged mount
• Prevents additional wear to the motor and nearby components by keeping the motor stable

• One motor mounting bracket as shown

• Turn off power to the appliance before beginning any repair; disconnect electrical supply to avoid shock
• Verify correct bracket orientation and motor alignment before fully tightening fasteners
• Use OEM-style fasteners and torque to manufacturer recommendations when available
• Replace rusted or stripped fasteners to ensure secure mounting

This is a replacement hood-handle screw that secures the handle to the appliance. It restores a loose or missing fastener so the hood handle sits firmly and functions safely during normal use. What it does:

• Secures the hood/handle assembly to the appliance so the handle does not wobble or detach
• Replaces stripped, corroded, or missing mounting hardware
• Helps eliminate handle movement or rattling when opening/closing

• High-level replacement; requires basic hand tools (screwdriver or nut driver) — do not force hardware
• Disconnect power or ensure appliance is off and cool before working near heating elements or controls
• Inspect handle and mating threads; replace damaged parts to ensure secure fit
• Tighten to firm snugness; avoid overtightening which can strip threads or crack handle material

Replace a failing battery mount with fuse if your gas cooktop igniter won't spark. This electrical component houses the battery and fuse system.

Replace a failing battery mount with fuse if your gas cooktop igniter won't spark. This electrical component houses the battery and fuse system.

Replace a broken or worn right-side torsion spring on your grill lid. This spring assists with smooth lid opening and closing. Order now for proper fit.

A replacement halogen interior light bulb for ovens and ranges that restores clear, bright cooktop and cavity illumination so you can check food without opening the door. Fits common appliance interior lamp sockets. What it does:

• Provides bright, focused illumination for oven and range interiors
• Lets you see cookware and food without opening the oven door
• Commonly replaces bulbs that are dim, flickering, or burned out
• Designed for appliance lamp housings—matches standard oven light fit and beam

• Always disconnect power to the appliance and allow the cavity and bulb to cool before servicing.
• Use gloves or a clean cloth when handling the bulb to avoid oils on the glass.
• Verify the part number and bulb shape match your existing lamp before installing.

Grill won't ignite or produces weak sparks? This ignition electrode creates the spark needed to light your grill burners. Direct replacement part.

This elbow nut secures an angled fitting on an appliance plumbing or gas connection, helping maintain a leak-resistant joint and stable line routing. It's a small replacement part used where tubing or a pipe meets an angled port. What it does:

• Tightens an elbow fitting to hold tubing or piping at a 90° angle
• Creates a compression-style connection to help prevent leaks at the joint
• Restores a secure, wobble-free elbow when the original nut is worn or damaged
• Useful when a loose or leaking corner fitting causes drips or loss of pressure

• Turn off and isolate the related supply (water or gas) and power before starting work
• Hand-start the nut on the fitting, then finish tightening with a wrench; avoid overtightening
• Inspect the mating ferrule or fitting for damage and replace if necessary to ensure a proper seal
• After installation, restore supply and check the joint carefully for leaks

Replaces a worn, cracked, or missing trim cap on your cooktop. This plastic cover protects internal components and restores a clean, finished look.

This spark igniter electrode creates the spark that lights a gas range burner, restoring reliable ignition and helping cooks get burners to light quickly. Designed to match OEM fit and function for direct replacement. What it does

• Generates the spark needed to ignite the burner gas for cooktop/range operation
• Replaces worn, cracked, or fouled electrodes that can cause weak or no spark
• Helps eliminate intermittent ignition and clicking issues when the electrode is the source
• Works with the burner assembly to produce a consistent, visible spark during ignition

• One replacement spark igniter electrode

• Turn off power and shut off the gas supply before starting any service
• Handle the ceramic/insulator carefully; avoid touching the tip with bare hands to prevent oils or damage
• Verify correct electrode positioning and gap per the range service instructions for safe, reliable ignition

Electrode wire for cooktop ignition system. Replace if burners won't ignite or spark is weak. Verify compatibility with your cooktop model number.

This hanger secures the rear burner assembly to the cooktop so the burner stays aligned for safe, even heating. It's a direct-fit replacement that restores proper burner positioning and stability. What it does:

• Holds the rear burner in place so the burner cap and head sit correctly
• Prevents burner movement that can cause uneven flames or poor ignition contact
• Helps maintain safe operation by keeping the burner assembly stable during use
• Fits into the cooktop support structure where the rear burner mounts

• Disconnect power and fuel source (gas or electric) and allow all surfaces to cool before servicing.
• Handle carefully—sharp edges may be present on the cooktop and burner parts.
• Remove burner head/cap as required, align the hanger with the mounting slots, and secure per the oven/range's service diagram.

Fix ignition failure on your grill with this electrode kit. Replaces worn electrodes that prevent burners from lighting. Standard DIY repair.

This roller bearing kit replaces worn drum support bearings to help restore smooth drum rotation and reduce rubbing or squeaking during operation. Fits select dryers and installs where the drum rides on the roller assembly. What it does:

• Supports and stabilizes the dryer drum so it spins evenly
• Reduces or eliminates squealing, rubbing, or wobbling noises tied to worn rollers
• Helps prevent excessive drum wear and prolongs other support components
• Restores proper drum alignment for improved laundry performance

• Roller bearing kit

• Basic mechanical skills and common hand tools required
• Disconnect power (and gas supply, if applicable) before beginning repair
• Inspect surrounding components (belt, glides, rear bulkhead) and replace if visibly worn
• Tighten mounting hardware to OEM torque where specified; do not overtighten

Grill seal prevents heat loss and protects internal components. Replace if cracked, brittle, or no longer sealing properly. Verify fit with your model.

This is a small drain plug or cap used on a range or oven, typically to seal a drain opening in the cooking surface or lower panel. It prevents grease and liquids from leaking through the drain hole when the drain function is not in use. Replace this plug if it is cracked, missing, or no longer fits snugly, which can cause grease to drip onto internal components.

Bezel trim ring for cooktop grill modules. Installs around the grill surface as a decorative frame. Replace if cracked, discolored, or missing.

Mounting screw for cooktop and grill units. Secures components and panels in place. Replace if stripped, missing, or damaged during maintenance.

This is a stainless steel control knob designed for the cooktop or oven on a range. It attaches to the control shaft and allows you to adjust burner flame or oven temperature settings. Replace this knob if it is cracked, the markings are worn off, or if it no longer grips the shaft properly and spins without engaging the control.

This OEM thermometer with attached heat sink measures oven temperature and helps control heating cycles for consistent cooking results. It replaces a worn or failed sensor assembly to restore accurate temperature readings. What it does:

• Senses internal oven temperature so the control board can regulate heating elements
• Helps stop ovens from running too long or not reaching set temperatures
• Commonly replaced when the oven runs cold, overheats, or displays incorrect temperature/no heat
• Works as the sensor/thermostat assembly that interfaces with the oven control

• One thermometer with heat sink assembly

• Disconnect power to the appliance before starting any repair
• Handle the sensor element and wiring gently to avoid damage
• Reinstall in the original orientation and secure mounting hardware as found
• After installation, restore power and verify oven reaches and holds set temperatures

Fix a grill that won't light with this main burner spark module. Restores reliable ignition when burners fail to spark. Typical 30-minute repair.

Fix uneven heating or burners that won't ignite with a new grill burner valve. Controls gas flow to each burner for proper temperature regulation.

Replace a damaged or warped firebox bottom baffle that causes uneven heating or flame distribution. Direct-fit part restores proper heat flow.

Grill won't ignite or sparks inconsistently? This electrode mounting nut secures the igniter in place for reliable spark and proper burner ignition.

Fix ignition issues caused by loose or missing electrode screws. This mounting screw secures the igniter electrode for reliable grill starts.

A small #8-32 lock nut that secures threaded fasteners to prevent loosening from vibration or thermal cycling. Use it to keep electrical and mechanical connections tight for reliable appliance operation. What it does:

• Threads onto #8-32 bolts or studs to lock assemblies in place
• Resists backing off from vibration or repeated movement
• Commonly used on control panels, brackets, and terminal connections
• Helps maintain safe, consistent electrical and mechanical contact

• Use the matching #8-32 bolt or stud; hand-start threads to avoid cross-threading
• Tighten securely but avoid over-torquing to prevent thread damage
• Disconnect power before working near live electrical connections

This is a replacement appliance screw used to secure panels, brackets, and small components so parts stay aligned and stable during normal use. A simple hardware fix that restores proper fit and reduces rattles or looseness. What it does:

• Fastens panels, brackets, or trim to the appliance frame or components
• Restores secure mounting and alignment for doors, control bezels, or internal assemblies
• Helps eliminate rattling, vibration noise, and loose parts from missing or damaged screws
• Small, general-purpose fastener for use where the OEM specifies this part

• One screw as shown

• Disconnect power or unplug the appliance before working on it
• Use the correct screwdriver bit to avoid stripping the head
• Thread carefully and do not over-tighten to prevent damage to threads or plastic components
• Keep small parts away from children and pets

The Tubular Main Burner is an OEM part for GE gas grill models. It delivers steady flame output along the length of the grill surface.   

Symptoms of a faulty burner include:

• Inaccurate temperature distribution across the cooking zone
• Burner flames that sputter, blow out or are difficult to ignite/control
• Methane odor or gas leakage presenting safety concerns

Causes involve wear and corrosion cracking combustion tubing over time, clogged or damaged gas ports disrupting optimal fuel mixture, bent burner shapes restricting flow.

This OEM part is also compatible with Hotpoint and RCA gas grill models.

Restore high-heat searing when your grill won't reach proper temperatures. This infrared sear burner replacement fits multiple grill models.

Center sear plate prevents direct flame exposure and distributes heat evenly. Replace if causing uneven cooking or excessive flare-ups from buildup.

Replace your grill sear plate if steaks aren't searing properly or you notice uneven heating. Restores optimal searing surface for perfect grill marks.

Rotisserie jack installs on your grill to power the rotisserie spit motor. Replace if the original is cracked, broken, or missing connection port.

This is a power cord for a range or oven that connects the appliance to the wall outlet. It supplies electrical power to the unit's heating elements, controls, and other components. Replace this cord if it shows signs of fraying, burn marks, exposed wiring, or if the range intermittently loses power.

Converting your cooktop from natural gas to propane? This LP gas conversion kit includes orifices and components for safe fuel type conversion.