Parts for Ge JGB750DEF2WW: Control Panel & Cooktop Parts

Fix unresponsive controls or a black display with this range electronic control board. Restores accurate cycle timing and reliable operation.

Lower back cover panel for gas ranges. Protects internal components at the rear base. Replace if cracked, damaged, or missing to restore appearance.

Secures components to your appliance chassis for a rattle-free fit. Replace missing, stripped, or corroded screws to keep panels and brackets aligned.

Fix burners that won't ignite with a new spark module. Generates the spark to light gas cooktop burners. Common DIY repair for multiple burners failing.

The Electrodes and Harness Assembly is an OEM part for GE gas ranges. This assembly includes the electrode rods that produce sparks to ignite the gas burners as well as the wiring harness that connects the electrodes to the control unit.

Causes can be normal wear and tear over the lifetime of the appliance. Repeated sparking from ignition as well as heat cycling can deteriorate the electrode material and wires. Physical damage from impact or liquids could also compromise function.

Symptoms of a bad assembly include issues like:

• One or more burners that intermittently fail to light
• Burners that light slowly or unreliably
• Safety concerns if the insulation on the harness degrades

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Cast iron grate for the left front burner position on your range cooktop. Replaces cracked, broken, or missing grates to provide stable support for pots.

Pin locator for gas ranges. Secures and aligns burner components in proper position. Replace if broken, missing, or worn to restore proper burner assembly.

Factory screw secures brackets, panels, trim, or burner components on ranges, cooktops, and wall ovens. Replaces missing, stripped, or corroded fasteners.

This control panel overlay (T012) replaces a worn or damaged range/oven control-face panel to restore button labels and the finished appearance of the control area. It keeps legends readable so you can operate the controls with confidence. What it does:

• Restores printed button labels and markings that have become faded, rubbed off, or discolored
• Protects the underlying control electronics from everyday wear and minor surface contamination
• Helps prevent accidental presses caused by torn or warped overlays
• Improves the finished look of the control area for a like-new appearance

• Disconnect power to the appliance before starting any service.
• Remove the control/front panel per the manufacturer's service instructions to access the overlay.
• Clean and dry the mounting surface before installing; align the overlay carefully and press into place without forcing.

Medium burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn from use.

Burner cap sits atop the burner base on gas ranges and cooktops. Replace if cracked, chipped, discolored, or missing to restore a clean appearance.

Replacement burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn.

Burner cap assembly covers the burner head on gas cooktops and ranges. Replace cracked, stained, corroded, or missing caps to restore appearance.

Replacement small surface burner for gas ranges and cooktops. Installs on stovetop to provide heat for smaller pots. Replace if damaged, discolored, or missing.

Burner base holds and secures the gas burner assembly on your cooktop. Replace if cracked, warped, or corroded to restore proper burner seating.

The Vision Burner XL is an OEM part for GE ranges. It is a large burner designed to provide high heat output for tasks that require intense cooking temperatures, such as boiling large pots of water or rapid heating. This burner ensures efficient and po

Oval burner assembly for gas range cooktops. Replace if your burner head or cap is cracked, clogged, damaged, or missing. Includes both burner and cap.

The Medium Surface Burner is an OEM part for GE ranges and cooktops. This burner is essential for a wide range of cooking tasks, from simmering sauces to sautéing vegetables. The medium surface burner ensures even heat distribution and efficient

Venturi tube for LP gas ranges rated at 15,000 BTU. Installs between the gas valve and burner orifice to mix air with fuel. Replace if cracked or missing.

Color: White. Mounting screw for end caps.

This ground harness is a short wire assembly that connects an appliance's metal chassis to the electrical grounding system, helping ensure safe operation and reduce the risk of electric shock. It replaces a worn or damaged ground lead to restore proper grounding. What it does:

• Provides a secure path to ground between the appliance frame and the house grounding conductor
• Helps prevent electrical faults from energizing the chassis
• Commonly needed if the original wire is corroded, frayed, or has a broken terminal
• Supports safe operation after repairs that require re-establishing chassis ground

• One ground harness (wire lead) as shown

• Install only with the appliance disconnected from power; follow all safety guidelines
• Attach to the designated grounding point on the chassis and to the appliance ground or terminal using the provided or existing fasteners
• Use appropriate tools and replace any damaged connectors
• No additional parts are included unless explicitly listed

Package of 12

Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.

Flat cooking surface that fits over range burners for pancakes, eggs, and sandwiches. Replace if cracked, warped, or missing from previous owners.