Parts for Ge JGS650DEF2WW: Control Panel & Cooktop Parts

Replace your range's control knob assembly when cracked, broken, or missing. This heavy-duty black knob installs on the control panel to operate burners.

Foam seal tape creates an airtight barrier between your cooktop and countertop, preventing spills from dripping into cabinets. Replace when worn or gaps appear.

This ground harness is a short wire assembly that connects an appliance's metal chassis to the electrical grounding system, helping ensure safe operation and reduce the risk of electric shock. It replaces a worn or damaged ground lead to restore proper grounding. What it does:

• Provides a secure path to ground between the appliance frame and the house grounding conductor
• Helps prevent electrical faults from energizing the chassis
• Commonly needed if the original wire is corroded, frayed, or has a broken terminal
• Supports safe operation after repairs that require re-establishing chassis ground

• One ground harness (wire lead) as shown

• Install only with the appliance disconnected from power; follow all safety guidelines
• Attach to the designated grounding point on the chassis and to the appliance ground or terminal using the provided or existing fasteners
• Use appropriate tools and replace any damaged connectors
• No additional parts are included unless explicitly listed

A replacement panel manifold bracket that secures the control panel/manifold assembly to the range, restoring proper alignment and stability for reliable control operation and reduced vibration or rattling. What it does

• Secures the control panel/manifold to the appliance frame to prevent sagging or misalignment
• Keeps control components and wiring held firmly in place for consistent knob/button operation
• Reduces rattling or vibration noise coming from the control area
• Helps maintain proper spacing so switches and controls engage correctly

• One panel manifold bracket

• Disconnect power to the appliance before beginning any work
• If this is for a gas range, turn off the gas supply at the shutoff valve
• Use basic hand tools; keep track of screws and fasteners removed

This metal mounting bracket secures the appliance's manifold/panel assembly, keeping valves and controls properly aligned so the range or cooktop operates reliably and without excess vibration or movement. What it does:

• Provides a stable mounting point for the manifold and control panel assembly
• Keeps gas valves and control components aligned to prevent stress or misalignment
• Stops panel movement and reduces rattling or looseness during use
• Helps maintain correct spacing for valve and ignitor connections

• Disconnect power and gas supply before servicing gas appliances; follow appliance-specific safety procedures
• Use appropriate fasteners and torque; confirm bracket is seated before reassembly
• Wear gloves to protect from sharp sheet-metal edges

If your range display is blank, buttons don't respond, or oven won't heat, the electronic control board likely failed. This part restores operation.

Fix broken or chipped cooktop grates with this cast iron range grate. Restores stable cookware support over gas burners. Easy DIY swap for safer cooking.

Replacement cooktop surface for your range. Covers the top of the stove where burners install. Order if your current surface is cracked, chipped, or damaged.

Secures cooktop panels, brackets, and components on your gas range. Replace missing, stripped, or damaged screws to eliminate rattles and restore alignment.

This corner trim kit replaces damaged or worn corner trim on compatible refrigerator doors, restoring a clean, finished appearance and helping protect edges from chips and moisture. It's a straightforward cosmetic repair for visible door damage. What it does:

• Covers and protects the outer corner of the refrigerator door to restore a factory-finish look
• Replaces cracked, warped, or discolored corner trim that can detract from appliance appearance
• Helps keep moisture and debris from collecting at door corners
• Fits into existing trim channels and aligns with adjacent door trim pieces

• Corner trim kit

• Turn off power to the appliance and remove food from the door area before starting
• Remove the damaged trim carefully to avoid scratching the door surface; use plastic trim tools where possible
• Align new trim pieces to the door edge and press or secure per OEM instructions; do not force or bend trim excessively
• If fasteners are required, use the OEM-specified screws and tighten securely but not overtightened to avoid cracking trim

This white spacer complement positions and supports adjacent components to keep panels and trim aligned for a clean, even fit. It prevents rubbing and helps reduce vibration where small gaps or misalignment occur. What it does:

• Provides spacing between panels, trim, or mounting points to maintain proper alignment
• Cushions components to reduce noise and vibration from contact
• Prevents rubbing or abrasion that can cause wear or cosmetic damage
• Helps restore even door/panel gaps and correct minor fit issues

• Disconnect power to the appliance before beginning any repair
• Handle the spacer gently to avoid cracking; align carefully before securing
• Use basic hand tools as required and follow the appliance service manual for removal/replacement steps

This small white spacer positions and supports adjacent components to ensure proper alignment and spacing. It helps keep panels and trim seated correctly for a clean fit and quiet operation. What it does:

• Provides a precise gap between parts to prevent rubbing or binding
• Stabilizes trim or panels to reduce rattling and noise
• Helps maintain correct alignment after reassembly or repair
• Used where a small plastic spacer is required to secure components

• One white spacer complement

• Disconnect power to the appliance before beginning any work
• Remove panels or trim carefully to access the spacer location
• Replace only the spacer(s) intended for the repair; confirm orientation before fastening

Medium burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn from use.

Burner cap sits atop the burner base on gas ranges and cooktops. Replace if cracked, chipped, discolored, or missing to restore a clean appearance.

Replacement burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn.

Burner cap assembly covers the burner head on gas cooktops and ranges. Replace cracked, stained, corroded, or missing caps to restore appearance.

Replacement small surface burner for gas ranges and cooktops. Installs on stovetop to provide heat for smaller pots. Replace if damaged, discolored, or missing.

The Medium Surface Burner is an OEM part for GE ranges and cooktops. This burner is essential for a wide range of cooking tasks, from simmering sauces to sautéing vegetables. The medium surface burner ensures even heat distribution and efficient fuel consumption, contributing to the overall cooking performance of your appliance.

Causes of a bad Medium Surface Burner can range from clogged burner ports, which impede gas flow and affect flame consistency, to wear and tear on the igniter or the burner assembly that prevents proper operation.

Symptoms of a malfunctioning Medium Surface Burner include:

• Inconsistent flame size or failure to ignite
• Uneven heating or hot spots on the cookware
• Visible damage or corrosion on the burner itself

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Burner base holds and secures the gas burner assembly on your cooktop. Replace if cracked, warped, or corroded to restore proper burner seating.

The Vision Burner XL is an OEM part for GE ranges. It is a large burner designed to provide high heat output for tasks that require intense cooking temperatures, such as boiling large pots of water or rapid heating. This burner ensures efficient and powerful cooking performance.

Causes of a bad Vision Burner XL can include wear and tear from frequent use, exposure to high temperatures, or damage due to impact or spills. Electrical issues can also lead to malfunctioning.

Symptoms of a bad Vision Burner XL include:

• The burner not igniting
• Uneven flame or weak flame
• The burner not maintaining a steady flame
• Visible damage or corrosion on the burner

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Venturi tube for LP gas ranges rated at 15,000 BTU. Installs between the gas valve and burner orifice to mix air with fuel. Replace if cracked or missing.

Single fastening screw for range components. Replaces missing, stripped, or damaged screws that secure panels, brackets, and trim pieces in place.

Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.

Panel mounting screw secures trim, bezels, and internal components on ranges and cooktops. Replace when stripped, corroded, or missing to restore fit.

Factory screw secures brackets, panels, trim, or burner components on ranges, cooktops, and wall ovens. Replaces missing, stripped, or corroded fasteners.

The Bumper is an OEM part for GE ranges. It is located on the sides of the oven drawer and serves as a cushion to prevent noise, vibration, and wear. As time goes on, regular use of the appliance can cause it to become damaged or worn out.

Causes of a bad bumper can include wear and tear from regular use, deterioration of the material over time, or damage from excessive force when closing the door.

Symptoms of a bad Bumper include:

• Excessive noise
• Difficulty in sliding the drawer
• Misalignment
• Wear, and increased friction

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Package of 12