Parts for Ge JGS750EEF3ES: Control Panel & Cooktop Parts

Cracked or missing range knob making it hard to adjust burner settings? This control knob restores easy operation. Simple DIY fix in minutes.

Fix a cracked or discolored control panel cover on your range. This assembly restores appearance and protects electronic controls underneath.

Size: 8 - 32 inch.

This ground harness is a short wire assembly that connects an appliance's metal chassis to the electrical grounding system, helping ensure safe operation and reduce the risk of electric shock. It replaces a worn or damaged ground lead to restore proper grounding. What it does:

• Provides a secure path to ground between the appliance frame and the house grounding conductor
• Helps prevent electrical faults from energizing the chassis
• Commonly needed if the original wire is corroded, frayed, or has a broken terminal
• Supports safe operation after repairs that require re-establishing chassis ground

• One ground harness (wire lead) as shown

• Install only with the appliance disconnected from power; follow all safety guidelines
• Attach to the designated grounding point on the chassis and to the appliance ground or terminal using the provided or existing fasteners
• Use appropriate tools and replace any damaged connectors
• No additional parts are included unless explicitly listed

A replacement panel manifold bracket that secures the control panel/manifold assembly to the range, restoring proper alignment and stability for reliable control operation and reduced vibration or rattling. What it does

• Secures the control panel/manifold to the appliance frame to prevent sagging or misalignment
• Keeps control components and wiring held firmly in place for consistent knob/button operation
• Reduces rattling or vibration noise coming from the control area
• Helps maintain proper spacing so switches and controls engage correctly

• One panel manifold bracket

• Disconnect power to the appliance before beginning any work
• If this is for a gas range, turn off the gas supply at the shutoff valve
• Use basic hand tools; keep track of screws and fasteners removed

This metal mounting bracket secures the appliance's manifold/panel assembly, keeping valves and controls properly aligned so the range or cooktop operates reliably and without excess vibration or movement. What it does:

• Provides a stable mounting point for the manifold and control panel assembly
• Keeps gas valves and control components aligned to prevent stress or misalignment
• Stops panel movement and reduces rattling or looseness during use
• Helps maintain correct spacing for valve and ignitor connections

• Disconnect power and gas supply before servicing gas appliances; follow appliance-specific safety procedures
• Use appropriate fasteners and torque; confirm bracket is seated before reassembly
• Wear gloves to protect from sharp sheet-metal edges

Fix a blank display, unresponsive keypad, or F7 error code. This control board restores oven operation when buttons stop working or the screen goes dark.

This replacement pan-head screw is used in refrigerators to fasten panels, brackets, and covers so they stay tight and properly aligned. Replace a missing or damaged screw to restore a solid, rattle-free fit.

• Secures interior/exterior panels, brackets, trim, and covers
• Replaces missing, stripped, or corroded hardware
• Helps maintain proper alignment of attached components

• Disconnect power before servicing; shut off water if working near water lines
• Match location to the original fastener and start threads by hand to avoid cross-threading
• Do not overtighten, especially into plastic or thin sheet metal

• Thread size: #8-18 (type AB)
• Length: 1/2 inch
• Head style: Pan head, Phillips drive

Fix broken or chipped cooktop grates with this cast iron range grate. Restores stable cookware support over gas burners. Easy DIY swap for safer cooking.

Secures range brackets, panels, trim, or controls. Replace if missing, stripped, or damaged to restore proper alignment and eliminate rattles.

Replace your range top seal to prevent heat loss and maintain cooking efficiency. Essential when worn or damaged. Confirm fit with your model number.

Medium burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn from use.

Burner cap sits atop the burner base on gas ranges and cooktops. Replace if cracked, chipped, discolored, or missing to restore a clean appearance.

Replacement burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn.

Burner cap assembly covers the burner head on gas cooktops and ranges. Replace cracked, stained, corroded, or missing caps to restore appearance.

Burner base holds and secures the gas burner assembly on your cooktop. Replace if cracked, warped, or corroded to restore proper burner seating.

Venturi tube for LP gas ranges rated at 15,000 BTU. Installs between the gas valve and burner orifice to mix air with fuel. Replace if cracked or missing.

Panel mounting screw secures trim, bezels, and internal components on ranges and cooktops. Replace when stripped, corroded, or missing to restore fit.

The Bumper is an OEM part for GE ranges. It is located on the sides of the oven drawer and serves as a cushion to prevent noise, vibration, and wear. As time goes on, regular use of the appliance can cause it to become damaged or worn out.

Causes of a bad bumper can include wear and tear from regular use, deterioration of the material over time, or damage from excessive force when closing the door.

Symptoms of a bad Bumper include:

• Excessive noise
• Difficulty in sliding the drawer
• Misalignment
• Wear, and increased friction

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Replace your range's vent trim if it's cracked, discolored, or missing. This decorative trim piece covers the vent opening on your cooktop.

Package of 12