Parts for Ge P2S920SEF2SS: Control Panel & Cooktop Parts

Convert your gas range from natural gas to liquid propane with this conversion kit. Includes orifices and regulator components for safe LP operation.

Stainless steel cleaner for gas ranges and cooktops. Restores shine and removes fingerprints, smudges, and streaks from exterior surfaces.

Replace a cracked, broken, or missing range control knob. Restores grip and precise heat level selection. Attaches to valve shaft for burner settings.

This upper panel manifold routes gas to the appliance's burner assembly, restoring proper gas distribution for reliable ignition and heat control. Use when the manifold is cracked, corroded, or leaking to help restore safe burner operation. What it does

• Directs gas from the supply to the correct burner ports for even flame delivery
• Replaces manifolds that are cracked, corroded, or otherwise leaking gas
• Helps address intermittent or non-igniting burners when manifold damage or blockage is present
• Works with the appliance's valves and burner assembly to maintain proper gas flow

• One upper panel manifold

• Turn off the appliance gas supply and electrical power before starting work
• Use approved fittings and gas-rated thread sealant where required; check for leaks after installation
• Inspect related components (burner valves, gaskets, tubing) and replace as needed

Control panel assembly that houses the manifold components on your range. Mounts to the front of the unit. Replace if cracked, damaged, or discolored.

Oven won't heat or display is dead? The control board manages all oven functions. Moderately difficult repair requiring panel removal and wiring.

This replacement pan-head screw is used in refrigerators to fasten panels, brackets, and covers so they stay tight and properly aligned. Replace a missing or damaged screw to restore a solid, rattle-free fit.

• Secures interior/exterior panels, brackets, trim, and covers
• Replaces missing, stripped, or corroded hardware
• Helps maintain proper alignment of attached components

• Disconnect power before servicing; shut off water if working near water lines
• Match location to the original fastener and start threads by hand to avoid cross-threading
• Do not overtighten, especially into plastic or thin sheet metal

• Thread size: #8-18 (type AB)
• Length: 1/2 inch
• Head style: Pan head, Phillips drive

Cast-iron side grate for gas range cooktops. Supports pots and pans on side burner. Replace if cracked, broken, worn, or missing to restore stability.

Cracked or damaged cooktop surface? This range top replacement restores your flat cooking area and secures burners safely. Fixes visible damage to stovetop.

Cast iron center grate for gas range cooktops. Replaces cracked, broken, or worn center grates. Installs over center burner for even pot support.

Secures cooktop panels, brackets, and components on your gas range. Replace missing, stripped, or damaged screws to eliminate rattles and restore alignment.

Replace your range top seal to prevent heat loss and maintain cooking efficiency. Essential when worn or damaged. Confirm fit with your model number.

Fix F76 error codes and unresponsive touch controls. This range glass and touch control board assembly restores full keypad functionality.

Medium burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn from use.

Burner cap sits atop the burner base on gas ranges and cooktops. Replace if cracked, chipped, discolored, or missing to restore a clean appearance.

Replacement burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn.

Central burner cap for gas cooktops. Covers the center of the burner to shape flame and protect the burner head. Replace if cracked, worn, or missing.

Replacement small surface burner for gas ranges and cooktops. Installs on stovetop to provide heat for smaller pots. Replace if damaged, discolored, or missing.

The Medium Surface Burner is an OEM part for GE ranges and cooktops. This burner is essential for a wide range of cooking tasks, from simmering sauces to sautéing vegetables. The medium surface burner ensures even heat distribution and efficient fuel consumption, contributing to the overall cooking performance of your appliance.

Causes of a bad Medium Surface Burner can range from clogged burner ports, which impede gas flow and affect flame consistency, to wear and tear on the igniter or the burner assembly that prevents proper operation.

Symptoms of a malfunctioning Medium Surface Burner include:

• Inconsistent flame size or failure to ignite
• Uneven heating or hot spots on the cookware
• Visible damage or corrosion on the burner itself

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Tri-Ring Burner Assembly is an OEM part for GE gas cooktops and ranges. It contains the three front right burners, grates, and supporting brackets.

Causes of a bad burner assembly can include cracked or warped burner heads from prolonged heat exposure. Deterioration of internal gas pipes and orifices may also diminish flame and heating performance.

Symptoms of a bad Tri-Ring Assembly include:

• Unstable, yellowish, or excessively large flames that cannot be adjusted
• Burners that cannot be ignited or controlled independently
• Improper alignment causing imbalanced pans or spills
• Leakage or gas smells detected around the burner cavities

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore branded appliances.

Oval burner assembly for gas range cooktops. Replace if your burner head or cap is cracked, clogged, damaged, or missing. Includes both burner and cap.

Burner base holds and secures the gas burner assembly on your cooktop. Replace if cracked, warped, or corroded to restore proper burner seating.

Outer burner cap for sealed gas cooktop burners. Shapes flame distribution around the outer ring. Replace if cracked, warped, or missing.

This ground harness is a short wire assembly that connects an appliance's metal chassis to the electrical grounding system, helping ensure safe operation and reduce the risk of electric shock. It replaces a worn or damaged ground lead to restore proper grounding. What it does:

• Provides a secure path to ground between the appliance frame and the house grounding conductor
• Helps prevent electrical faults from energizing the chassis
• Commonly needed if the original wire is corroded, frayed, or has a broken terminal
• Supports safe operation after repairs that require re-establishing chassis ground

• One ground harness (wire lead) as shown

• Install only with the appliance disconnected from power; follow all safety guidelines
• Attach to the designated grounding point on the chassis and to the appliance ground or terminal using the provided or existing fasteners
• Use appropriate tools and replace any damaged connectors
• No additional parts are included unless explicitly listed

Single fastening screw for range components. Replaces missing, stripped, or damaged screws that secure panels, brackets, and trim pieces in place.

Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.

The Bumper is an OEM part for GE ranges. It is located on the sides of the oven drawer and serves as a cushion to prevent noise, vibration, and wear. As time goes on, regular use of the appliance can cause it to become damaged or worn out.

Causes of a bad bumper can include wear and tear from regular use, deterioration of the material over time, or damage from excessive force when closing the door.

Symptoms of a bad Bumper include:

• Excessive noise
• Difficulty in sliding the drawer
• Misalignment
• Wear, and increased friction

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This vent trim is a replacement trim piece that finishes the vent opening on compatible GE appliances, restoring a clean, finished appearance and helping direct airflow at the vent. It's a simple exterior part that refreshes the look and fit of the vent area. What it does:

• Covers and finishes the vent opening to restore a clean, factory appearance
• Secures the vent edge and helps maintain trim alignment
• Hides damage or wear to the original trim without altering ventilation function
• Commonly replaced when the original trim is dented, cracked, loose or missing

• Disconnect power to the appliance before beginning work and follow all safety precautions.
• Basic hand tools are typically required; handle trim carefully to avoid scratching the finish.
• Check orientation and fit against the vent opening before final fastening.
• Replace damaged or missing mounting hardware or clips with the correct OEM fasteners.

Foam seal tape creates an airtight barrier between your cooktop and countertop, preventing spills from dripping into cabinets. Replace when worn or gaps appear.

This reversible griddle provides a flat cooking surface on one side and a ridged grill surface on the other, letting you sear or griddle foods directly over the range for versatile stovetop cooking. What it does:

• Replaces a missing or damaged griddle to restore flat and ridged cooking options.
• Allows even contact with pans and food for consistent browning and searing.
• Helps reduce flare-ups by keeping food elevated on the ridged side when grilling.
• Useful when foods stick, cook unevenly, or when the original griddle is warped or cracked.

• Handle carefully; item may be heavy and edges can be sharp. Use gloves if needed.
• Clean thoroughly before first use according to your range manual and the griddle care instructions.
• Preheat to the appropriate temperature before cooking; avoid sudden thermal shock (do not immerse a hot griddle in cold water).
• Follow your appliance manufacturer's instructions for placement and safe operation.

Secures range panels, brackets, and internal components. Replace this trilobular screw if the original is missing, stripped, or damaged to restore proper fit.