Parts for Ge PGB950DEF2WW: Control Panel & Cooktop Parts

Centers and aligns control knobs on the shaft for secure fit. Replace if cracked, broken, or missing to restore proper knob positioning and operation.

This control bracket secures the appliance control assembly in place to keep the control board and wiring stable and properly aligned. It replaces a bent, broken or missing bracket to restore correct mounting and reduce vibration. What it does:

• Holds the control board/control module firmly to the cabinet or frame
• Keeps wiring and connections aligned to prevent stress on plugs and harnesses
• Reduces vibration and rattling caused by loose or damaged brackets
• Helps prevent intermittent electrical issues caused by a poorly supported control assembly

• Disconnect power to the appliance before starting any repair
• Basic hand tools required; support the control board while removing/installing the bracket
• Handle the control board and connectors carefully to avoid damage from static or force
• After installation, verify connectors are fully seated and restore power to test operation

The Control is an OEM component specifically designed for GE gas ranges. It acts as the central hub that monitors and regulates all critical oven functions during cooking. The control precisely adjusts gas flow levels and ignition to maintain proper temperature according to user-programmed settings. 

Symptoms of a bad control include:

• Inability to ignite burners or maintain burner flame  
• Issues adjusting or reaching set oven temperatures
• Control panel lights/displays malfunctioning  
• Failure to turn oven on or select cooking functions

Causes can involve component wear over time dealing with high heat and intermittent use.

This OEM GE replacement part is also compatible with Hotpoint, RCA and certain Kenmore models for easy replacement.

Secures components to your appliance chassis for a rattle-free fit. Replace missing, stripped, or corroded screws to keep panels and brackets aligned.

Single fastening screw for range components. Replaces missing, stripped, or damaged screws that secure panels, brackets, and trim pieces in place.

Cast iron grate for gas range cooktops. Supports cookware over burner. Replace if cracked, chipped, warped, or enamel coating is damaged or worn.

Cast iron center grate for gas range cooktops. Replaces cracked, chipped, or missing middle grate to restore stable support for pots and pans.

Cast iron grate that supports pots and pans over the burner. Replaces a cracked, broken, or missing cooktop grate to restore a stable cooking surface.

Pin locator for gas ranges. Secures and aligns burner components in proper position. Replace if broken, missing, or worn to restore proper burner assembly.

Factory screw secures brackets, panels, trim, or burner components on ranges, cooktops, and wall ovens. Replaces missing, stripped, or corroded fasteners.

Secures range brackets, panels, trim, or controls. Replace if missing, stripped, or damaged to restore proper alignment and eliminate rattles.

The Daughter Board Relay is an OEM part for GE gas ranges. It acts as a secondary control circuit that facilitates precise regulation of 6 gas valves through relay activation. The daughter board works in tandem with the main control to monitor and adjust the gas flow according to temperature probes and user-programmed settings. 

Symptoms of a bad daughter board relay include: 

• Issues with gas ignition or maintaining burner flames
• Inability to properly adjust different burners' gas levels  
• Error codes associated with gas valve or control functions
• Random interruption during baking/broiling cycles

Causes can stem from long-term wear from heat cycles and electrical stresses on the components.  

This OEM GE replacement is compatible with Hotpoint, RCA and certain Kenmore gas ranges as well.

Medium burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn from use.

Burner cap sits atop the burner base on gas ranges and cooktops. Replace if cracked, chipped, discolored, or missing to restore a clean appearance.

Replacement burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn.

Central burner cap for gas cooktops. Covers the center of the burner to shape flame and protect the burner head. Replace if cracked, worn, or missing.

Replacement small surface burner for gas ranges and cooktops. Installs on stovetop to provide heat for smaller pots. Replace if damaged, discolored, or missing.

Burner base holds and secures the gas burner assembly on your cooktop. Replace if cracked, warped, or corroded to restore proper burner seating.

Fixes weak or uneven flames on high-output burners. This triple ring burner head restores powerful heat and smooth simmering. DIY-friendly repair.

Oval burner assembly for gas range cooktops. Replace if your burner head or cap is cracked, clogged, damaged, or missing. Includes both burner and cap.

The Medium Surface Burner is an OEM part for GE ranges and cooktops. This burner is essential for a wide range of cooking tasks, from simmering sauces to sautéing vegetables. The medium surface burner ensures even heat distribution and efficient fuel consumption, contributing to the overall cooking performance of your appliance.

Causes of a bad Medium Surface Burner can range from clogged burner ports, which impede gas flow and affect flame consistency, to wear and tear on the igniter or the burner assembly that prevents proper operation.

Symptoms of a malfunctioning Medium Surface Burner include:

• Inconsistent flame size or failure to ignite
• Uneven heating or hot spots on the cookware
• Visible damage or corrosion on the burner itself

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Outer burner cap for sealed gas cooktop burners. Shapes flame distribution around the outer ring. Replace if cracked, warped, or missing.

Loose burners or rattling sounds? This lock washer secures fasteners and prevents loosening from vibration. Quick 5-minute fix for cooktop assemblies.

Reversible cast iron griddle for gas ranges with flat cooking surface on one side and ridged grill on the other. Replace worn, damaged, or missing griddle.

Hex washer head screw for electric ranges. Secures panels, brackets, and internal components. Replace if screw is stripped, missing, or damaged.