Parts for Ge PGS950SEF5SS: Control Panel & Cooktop Parts

Stainless steel cleaner for gas ranges and cooktops. Restores shine and removes fingerprints, smudges, and streaks from exterior surfaces.

Converting your range from natural gas to propane? This LP conversion kit includes all orifices and components needed for safe fuel type conversion.

Cracked or missing range knob making it hard to adjust burner settings? This control knob restores easy operation. Simple DIY fix in minutes.

Upper manifold panel houses and protects range control buttons and knobs. Replace if worn, scratched, or damaged. Stainless steel finish panel.

Phillips head mounting screw for range control knobs and switches. Replaces lost, stripped, or damaged screws. 8-32 thread size for secure installation.

This ground harness is a short wire assembly that connects an appliance's metal chassis to the electrical grounding system, helping ensure safe operation and reduce the risk of electric shock. It replaces a worn or damaged ground lead to restore proper grounding. What it does:

• Provides a secure path to ground between the appliance frame and the house grounding conductor
• Helps prevent electrical faults from energizing the chassis
• Commonly needed if the original wire is corroded, frayed, or has a broken terminal
• Supports safe operation after repairs that require re-establishing chassis ground

• One ground harness (wire lead) as shown

• Install only with the appliance disconnected from power; follow all safety guidelines
• Attach to the designated grounding point on the chassis and to the appliance ground or terminal using the provided or existing fasteners
• Use appropriate tools and replace any damaged connectors
• No additional parts are included unless explicitly listed

Control panel assembly that houses the manifold components on your range. Mounts to the front of the unit. Replace if cracked, damaged, or discolored.

A replacement panel manifold bracket that secures the control panel/manifold assembly to the range, restoring proper alignment and stability for reliable control operation and reduced vibration or rattling. What it does

• Secures the control panel/manifold to the appliance frame to prevent sagging or misalignment
• Keeps control components and wiring held firmly in place for consistent knob/button operation
• Reduces rattling or vibration noise coming from the control area
• Helps maintain proper spacing so switches and controls engage correctly

• One panel manifold bracket

• Disconnect power to the appliance before beginning any work
• If this is for a gas range, turn off the gas supply at the shutoff valve
• Use basic hand tools; keep track of screws and fasteners removed

This metal mounting bracket secures the appliance's manifold/panel assembly, keeping valves and controls properly aligned so the range or cooktop operates reliably and without excess vibration or movement. What it does:

• Provides a stable mounting point for the manifold and control panel assembly
• Keeps gas valves and control components aligned to prevent stress or misalignment
• Stops panel movement and reduces rattling or looseness during use
• Helps maintain correct spacing for valve and ignitor connections

• Disconnect power and gas supply before servicing gas appliances; follow appliance-specific safety procedures
• Use appropriate fasteners and torque; confirm bracket is seated before reassembly
• Wear gloves to protect from sharp sheet-metal edges

Pan-head screw secures panels, brackets, and covers in your refrigerator. Replace missing or damaged screws to restore a solid, rattle-free fit.

Cast-iron side grate for gas range cooktops. Supports pots and pans on side burner. Replace if cracked, broken, worn, or missing to restore stability.

Cracked or damaged cooktop surface? This range top replacement restores your flat cooking area and secures burners safely. Fixes visible damage to stovetop.

Cast iron center grate for gas range cooktops. Replaces cracked, broken, or worn center grates. Installs over center burner for even pot support.

Factory screw secures brackets, panels, trim, or burner components on ranges, cooktops, and wall ovens. Replaces missing, stripped, or corroded fasteners.

Secures range brackets, panels, trim, or controls. Replace if missing, stripped, or damaged to restore proper alignment and eliminate rattles.

Replace your range top seal to prevent heat loss and maintain cooking efficiency. Essential when worn or damaged. Confirm fit with your model number.

Fix an unresponsive or cracked range control panel. This assembly combines the glass touch panel and electronic board to restore reliable operation.

Medium burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn from use.

Black burner cap sits on top of your gas range burner head. Replace if cracked, chipped, stained, or missing to restore your cooktop's appearance.

Replacement burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn.

Central burner cap for gas cooktops. Covers the center of the burner to shape flame and protect the burner head. Replace if cracked, worn, or missing.

Replacement small surface burner for gas ranges and cooktops. Installs on stovetop to provide heat for smaller pots. Replace if damaged, discolored, or missing.

Replace your cracked, warped, or missing medium surface burner. Ensures even heat distribution for cooking tasks. Installs on gas range cooktops.

Fixes weak or uneven flames on high-output burners. This triple ring burner head restores powerful heat and smooth simmering. DIY-friendly repair.

Oval burner assembly for gas range cooktops. Replace if your burner head or cap is cracked, clogged, damaged, or missing. Includes both burner and cap.

Burner base holds and secures the gas burner assembly on your cooktop. Replace if cracked, warped, or corroded to restore proper burner seating.

Secures range panels, brackets, and internal components. Replace this trilobular screw if the original is missing, stripped, or damaged to restore proper fit.

Outer burner cap for sealed gas cooktop burners. Shapes flame distribution around the outer ring. Replace if cracked, warped, or missing.

Loose burners or rattling sounds? This lock washer secures fasteners and prevents loosening from vibration. Quick 5-minute fix for cooktop assemblies.

Foam seal tape creates an airtight barrier between your cooktop and countertop, preventing spills from dripping into cabinets. Replace when worn or gaps appear.

Replace worn, cracked, or missing bumpers on your range oven drawer. Cushions the drawer to prevent noise, vibration, and wear during regular use.

Replace your cracked or missing range vent trim. This decorative trim piece covers the ventilation area on your range, providing a finished look.

Mounting screw for range installation and assembly. Replace missing, stripped, or damaged screws to secure panels, brackets, or components properly.

Reversible griddle with flat and ridged surfaces for stovetop cooking. Replaces missing, cracked, or worn griddle. Cast iron construction, seasoned finish.