Parts for HCR6250AGS: Control Panel & Cooktop Parts

Range burner cap directs flames for even heating. Replace when chipped, cracked, or discolored. Verify fit with your model number before ordering.

Covers and protects the burner head while shaping the gas flame. Replace your chipped, cracked, or missing cap to restore proper appearance and function.

This natural gas orifice controls the flow of gas to a cooktop or range burner for correct combustion and stable flame, helping the appliance run safely and efficiently. It's a small, precision fuel-delivery fitting used where natural gas is required. What it does:

• Metered opening limits gas flow so the burner produces a proper, even flame.
• Restores correct burner performance when a worn or clogged orifice causes weak or uneven flames.
• Helps prevent excessive gas flow that can cause yellowing flames or combustion issues.
• Used when replacing damaged, corroded, or obstructed orifices affecting burner operation.

• One natural gas orifice.

• Turn off the gas supply and power to the appliance before servicing.
• Remove burner cap/parts to access the orifice; installation typically requires basic hand tools.
• Install the new orifice by hand-starting threads, then snug—do not overtighten; follow appliance manufacturer torque guidance if available.
• After installation, check for proper ignition and inspect all gas connections for leaks with a soap solution or approved leak detector.

Replace your range's LP gas orifice when converting from natural gas to propane or if burner flames are yellow or irregular. Simple conversion part.

If your range's steam or cleaning function isn't working, this water injector controls water flow to restore proper operation. Direct replacement part.

Gas range LP orifice converts natural gas to propane. Replace when switching fuel types or if flame is incorrect. Verify model compatibility before ordering.

Replace your range's LP gas orifice if burner flames are yellow or uneven after converting to propane. This conversion orifice ensures proper gas flow.

This NG orifice is a small, precision gas jet that meters natural gas to a range or cooktop burner for proper flame size and combustion. It helps restore correct burner performance and consistent heating. What it does:

• Controls natural gas flow to the burner for stable, even flames
• Helps correct weak, uneven, or yellowing flames linked to improper gas flow
• Supports reliable ignition and consistent cooking heat when the orifice is the cause
• Does not include gaskets or manifold components; replaces only the orifice itself

• One NG (natural gas) orifice

• Turn off the appliance and main gas supply before attempting service
• Use correct wrench/socket size and avoid overtightening to prevent damage
• After installation, check all connections with a gas leak detector or soapy water; never check for leaks with an open flame

Gas range won't ignite or has weak flames on LP gas? This orifice converts your range from natural gas to propane. Quick 15-minute install.

Replace a faulty gas range switch harness assembly when controls stop responding or burners won't ignite. Compatible with select models. Moderate DIY.

The Temperature Control Valve is an OEM part for GE ranges. It modulates fuel flow to the burner based on temperature settings. 

Causes of failure can include wear of sealing surfaces, clogs or debris in the valve port, or internal spring fatigue over many heating cycles.

Symptoms of a bad temperature control valve are:

• Inaccurate or unstable oven temperatures
• Inability to reach or maintain desired heat levels 
• Exposure of flames outside the firebox 
• Leaks or gas smell coming from the oven area

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore gas range models. 

This burner base is the metal support that holds a gas cooktop's surface burner components in place, helping maintain proper burner alignment for reliable ignition and consistent flame control. What it does:

• Secures the burner head, burner cap and associated hardware to the cooktop surface
• Helps direct gas flow and maintain stable flame shape for even heating
• Commonly replaced when a burner won't light, has weak or uneven flame, or when the base is warped or damaged
• Works with the cooktop's ignition and gas delivery components to support normal operation

• Turn off gas supply and electrical power to the range before starting any service
• Handle sharp edges and small fasteners carefully; keep track of screws and alignment tabs
• Verify burners and caps are correctly seated after reassembly and test each burner for correct ignition and flame

Range not heating properly? This burner assembly restores consistent flame output on gas ranges. Common fix for weak or uneven flames. Moderate DIY repair.

Cast iron burner grate for gas range cooktops. Sits on top of range surface to support pots and pans over burner. Replace if cracked, warped, or missing.

Replacement backsplash panel for gas ranges. Installs behind the cooktop to protect the wall from heat and splatter. Order new if cracked or damaged.

Seals your oven door to maintain consistent cooking temperatures and prevent heat loss. Replace if worn, cracked, or deformed. Verify fit with your model.

Air inlet elbow for gas ranges. Directs airflow to burners for proper combustion. Replace if cracked, broken, or damaged to restore proper air intake.