Parts for Frigidaire FMOS1846BDA: Control Panel, Door|Ffmv1846vba-Door.Svg Parts

A complete refrigerator door assembly that replaces a damaged, dented or non-closing door to restore a proper seal and normal operation. Fits models that use the full door assembly for straightforward replacement. What it does

• Replaces the entire door structure so the appliance seals and insulates correctly.
• Restores an even closing action to stop warm air leaks and temperature loss.
• Replaces damaged outer panels, liners or mounting surfaces that prevent proper operation.
• Helps eliminate rattling, visible damage, and cosmetic wear from a compromised door.

• Disconnect power before beginning any repair to avoid electrical shock.
• Remove and support the old door; doors can be heavy—use two people if needed.
• Align hinges and latches carefully for an even seal and proper closing.
• Check gasket condition and hinge hardware during installation; replace any worn fasteners.

The Door Assembly is an OEM part for Frigidaire microwaves. It is responsible for enclosing the microwave cavity and providing a secure seal when the microwave is in operation.

A bad microwave door assembly can be caused by normal wear and tear, accidental damage, or faulty components. Signs of a faulty door assembly include a loose or sagging door, difficulty in opening or closing the door, or the door not latching properly.

Symptoms of a bad microwave door assembly can include:

• The microwave door not closing or sealing properly
• Excessive heat escaping from the microwave
• The microwave not starting when the door is closed
• Visible damage to the door, such as cracks or broken hinges

Replace your damaged microwave door assembly with this genuine OEM part to restore your microwave. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This complete door assembly replaces a damaged or dented refrigerator cabinet door to restore appearance and proper sealing. It ships ready to mount so you can return your fridge to normal operation quickly. What it does:

• Replaces a bent, cracked, or dented cabinet door to improve appearance and seal
• Provides a secure mounting surface for interior components and door hardware
• Helps the gasket seat correctly to maintain internal temperature
• Stops drafts and reduces energy loss when the original door is compromised

• Door alignment and hinge torque affect sealing
• Handle, hinge, and gasket may need transfer from the original door
• Disconnect power to the appliance and empty the door of contents before removing or installing
• Use two people for safe handling to avoid damage or injury

This complete outer door assembly replaces a damaged or dented refrigerator door to restore proper closure, seal performance, and the appliance's appearance. It ships ready to install so you can get the fridge working and looking right again. What it does:

• Replaces a damaged, dented, or warped outer refrigerator door to restore fit and appearance
• Re-establishes correct door alignment and sealing surface to help maintain internal temperature
• Addresses issues like visible damage, bent trim, or doors that no longer close flush
• Works with existing hinges, gaskets, and interior components when compatible

• One complete outer door assembly

• Disconnect power and remove food and door-mounted items before starting
• This heavy exterior assembly typically requires two people to move and align safely
• Transfer hinges, trim, and interior components per OEM instructions; use proper fasteners
• Check door alignment and gasket seal after installation; adjust hinge mounting if necessary

A complete outer door assembly that replaces a damaged or dented refrigerator door to restore function and appearance. Fits as a full replacement to simplify repairs and avoid patchwork fixes. What it does:

• Replaces the exterior door panel and attached hardware so the cabinet seals and appearance are restored
• Provides the mounting surface for hinges, handles, and door-mounted components
• Helps maintain proper cold retention when door closes fully (symptom: poor sealing or visible damage)
• Restores cosmetic finish where dents, deep scratches, or crushed edges are present

• Disconnect power and empty the door before starting; have a helper for safe handling
• Installation may require hinge alignment and adjustment for proper closing
• Use included hardware; otherwise reuse existing fasteners only if in good condition
• Follow manufacturer service instructions and wear gloves to protect finish and hands

This replacement door frame restores the structural trim around the appliance door so the door closes and looks correct. It replaces a cracked, dented or missing frame to bring back proper fit and appearance. What it does

• Provides the outer structural trim that secures the door panel and seals around the opening
• Restores proper alignment when the original frame is bent, cracked or damaged
• Reduces gaps that can allow drafts, leaks or improper closing
• Helps keep the door panel and internal components protected and stable

• One replacement door frame

• Disconnect power (and water supply if applicable) before beginning work
• Remove the door panel or surrounding trim per the appliance service instructions to access mounting points
• Reuse existing fasteners when possible; replace any damaged clips or screws
• Tighten fasteners evenly to avoid warping the frame; do not overtighten plastic clips

This latch secures the appliance door in the closed position to ensure proper operation and safety. A worn or broken latch can prevent the door from closing or staying shut, which may interrupt cycles or affect performance.

• Keeps the door closed and aligned so the appliance can start and run correctly
• Can address issues like incomplete cycles or error codes related to an open door
• Restores original closing feel and safety interlock function

• Disconnect power and, if applicable, shut off gas before service
• Use appropriate hand tools; retain existing screws and hardware unless replacements are provided
• Note latch orientation and spring position before removal to ensure proper reassembly
• Test door closure and operation after installation before returning to service

The Door Handle is an OEM part for Frigidaire microwaves. It is responsible for providing access in opening and closing the microwave door.

A bad microwave door handle can be caused by everyday use, accidental damage, or wear and tear. Signs of a faulty handle include a loose or wobbly grip, a cracked or broken handle, or difficulty in opening or closing the microwave door.

Symptoms of a bad microwave door handle can include:

• The handle feeling loose or unstable 
• Visible damage to the handle
• The microwave door not opening or closing

Replace your worn-out or damaged microwave door handle with this genuine OEM part to restore your microwave. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

Replacement refrigerator door handle that restores a secure, easy-to-grip surface for opening and closing. Matches original mounting points for a direct swap when a handle is cracked, loose or broken. What it does

• Provides a sturdy grip for opening and closing the refrigerator door.
• Replaces cracked, broken or loose handles that can prevent the door from closing properly.
• Fits the cabinet using the refrigerator's original mounting points for a straightforward replacement.
• Helps keep the door sealed and functioning by restoring proper alignment when a damaged handle interferes with operation.

• 1 replacement door handle

• Use caution and basic hand tools; do not overtighten fasteners to avoid cracking the handle or door.
• Retain any original screws, clips or mounting hardware; this part is typically a direct-fit and often installs using existing hardware.

This replacement handle restores a solid, comfortable grip on your appliance, so you can operate the door or drawer normally. Use it to replace a loose, cracked, or broken handle and refresh appearance and usability.

• Provides the external grip used to open and close the appliance door or drawer
• Replaces handles that are cracked, broken, stripped, or loose
• Restores a clean, finished look when the original is scuffed or discolored

• Disconnect power to the appliance before service; shut off gas if applicable
• Protect surrounding finishes; support the door to avoid strain while removing the old handle
• Transfer existing screws, end caps, or brackets to the new handle; match orientation
• Tighten fasteners evenly without overtightening; verify smooth operation after installation

The Handle is an OEM part for Frigidaire countertop microwaves. It allows for convenient opening and closing of the microwave door. Made from plastic, it is designed to withstand years of use while maintaining a secure grip. 

Causes of a bad handle can include cracks or breaks from heavy use over time, or damage due to impact or forceful pulling. Repeated excess heat exposure may also cause warping.

Symptoms of a handle needing replacement include:

• Difficulty opening or closing the door securely   
• Loose, wobbly, or unstable door movement  
• Sharp/rough edges presenting a safety hazard
• Cracks, breaks, or lack of integrity in plastic construction

This Genuine OEM Frigidaire handle is compatible with Electrolux, Westinghouse, and some Kenmore microwaves as well. 

This control panel is the oven console assembly that houses the touch controls and display, letting you choose cook modes and set temperatures for normal operation. It restores user control and readable status feedback. What it does:

• Provides the front-facing buttons/touchpad and display for entering oven settings
• Sends user commands to the oven's control electronics so cycles can start and stop
• Helps restore visible status indicators when the original panel is cracked, scratched, or unresponsive
• Common symptom fix: unresponsive keys, blank or dim display, or incorrect control input response

• Disconnect power at the breaker before starting any work
• Handle the panel and display carefully to avoid scratching or cracking the finish
• May require removing mounting screws and disconnecting ribbon/cable connectors — note connector orientation before removal

This control panel is the user-facing console overlay that houses the oven/range touch controls and display, restoring clear button access and readable status indicators for normal cooking functions. What it does:

• Replaces a cracked, faded, or unresponsive control console overlay so buttons and display labels are visible and usable
• Helps restore reliable tactile response and prevents debris from entering the control assembly
• Useful when display/backlight is intact but the front surface is damaged or worn
• Matches OEM fit and mounting points for a direct replacement when the part number matches

• Disconnect power to the appliance before attempting any service to avoid shock or injury
• Minor disassembly of the console or top trim may be required; follow OEM service manual steps
• Handle display areas and underlying electronics carefully to avoid damage to the control board or ribbon cables

This control panel is the user interface assembly that houses the touch buttons and display for the appliance, restoring normal control of settings and cycle selection. It replaces a damaged, cracked, or unresponsive front control surface. What it does

• Provides the buttons, keypad and display area used to select cycles, temperatures and options.
• Restores responsiveness when keys or the display no longer register input.
• Helps resolve intermittent or complete loss of control functions caused by a failed front panel.
• Works with the main control board to show status, time and selected settings.

• One control panel assembly as shown.

• Disconnect power (unplug or at breaker) before attempting any service to avoid shock or appliance damage.
• Minor disassembly of the console is typically required; save screws and mounting hardware for reinstallation.
• Handle the display and ribbon/connector(s) carefully; do not bend contacts or pull on wires.