Parts for Bosch HES7282U/01: Control Panel Parts

This is a replacement oven control board manufactured by Bosch. The oven control board is the oven's brain and handles all the functions. It also includes the display and provides users with the ability to control functionality, like bake and broil, setting timers, and more. While the oven control board does not include moving parts, heat and moisture can damage soldered components and lead to failure. Signs that the control board may need to be replaced include lack of information on the display, inability to control specific functions, or complete lack of operability. Note that this part is often misdiagnosed, so make sure to check the old board's operability with a multimeter before replacing it. To replace the oven control board, first remove the exterior cowling. Locate the wiring harness and disconnect it before removing the mounting screws. Install the replacement part following these steps in reverse.This genuine OEM part is sold individually. It only fits Bosch Thermador ovens.

This sealing ring creates a watertight seal in the dishwasher pump/motor area to help prevent leaks and protect the motor assembly. It's a small but essential replacement for worn or damaged seals. What it does:

• Seals pump housing joints to stop water leaks beneath the dishwasher
• Helps maintain proper water pressure and circulation for cleaning performance
• Prevents water from reaching the motor and electronics, reducing risk of damage
• Replaces brittle, cracked, or flattened seals that commonly cause under-unit leaks

• One sealing ring

• Turn off power and water to the appliance before starting any repair
• Inspect mating surfaces and clean away debris or buildup before installing the new ring
• Lubricate the seal lightly with OEM-recommended lubricant or a thin film of water if needed to ease installation
• If multiple seals or gaskets show wear, replace them together to ensure a complete seal.

This oven control knob lets you select temperatures and cooking functions with a smooth, precise turn. It restores easy, accurate control when the original knob is worn, cracked, or missing, keeping your range looking and working its best.

• Turns the oven's selector/temperature shaft to choose settings
• Replaces knobs that are loose, broken, stripped, or missing
• Helps resolve issues like slipping when turned or inability to select temperatures
• Maintains a clean, factory look with a stainless-style finish

• Disconnect power and allow the appliance to cool before servicing
• Pull the old knob straight off the control shaft; avoid prying against the panel
• Align the knob's flat/D-shaped insert with the shaft and press firmly until seated
• Test for smooth rotation and proper engagement of oven functions

This mounting bracket secures appliance components in place to restore proper alignment and stability. It's a simple replacement part that helps reduce rattling and supports correct panel or assembly positioning. What it does:

• Secures a panel or assembly to the appliance frame to prevent movement and vibration
• Restores proper alignment for doors, panels, or internal components
• Helps stop rattling, noises, or loose components that occur when a support bracket fails
• Provides a direct mechanical replacement—no electrical function

• One replacement mounting bracket

• High-level: remove power and water to the appliance before starting repairs
• Use basic hand tools; keep fasteners from the original part for reinstallation unless new ones are supplied
• If the bracket mounts a door or heavy panel, support the panel during removal and reinstallation to avoid damage

This heating element assembly provides the heating source for the appliance, restoring normal temperature output for drying/heating cycles. Replaces a worn or failed element to help recover proper operation and cycle performance. What it does

• Heats air or water as part of the appliance's main heating circuit.
• Restores normal cycle temperatures when the original element has failed.
• Can resolve symptoms such as no heat, extended cycle times, or temperature-related error codes.
• Works with the appliance's thermostat and safety cutouts to maintain safe operating temperature.

• Disconnect power (and gas supply, if applicable) before starting any repair.
• Handle with care to avoid damaging terminals, terminals insulation, or mounting brackets.
• Inspect surrounding wiring, connectors, and thermal cutouts; replace any damaged components.
• After installation, verify proper operation by running a test cycle and checking for correct heat and no unusual smells or noises.

This replacement cable harness routes electrical power and signals between an appliance's internal components to restore reliable operation and communication. Use when wiring is damaged, connectors are loose, or electrical faults affect performance. What it does:

• Provides the factory wiring path to carry power and control signals between components
• Replaces damaged or frayed wiring that can cause intermittent operation or loss of function
• Helps resolve symptoms such as no power to circuits, blown fuses, or erratic component behavior
• Ensures secure connector fit for stable electrical connections

• Disconnect all power (unplug appliance or switch off circuit breaker) before starting
• Compare the new harness to the old one for connector type and routing before installing
• Route and secure the harness following the original path; avoid sharp edges and heat sources

This heating element warms the dishwasher tub to help dry dishes and maintain wash temperatures for better cleaning and sanitation. It replaces a failed or weak heater to restore normal wash and dry performance. What it does:

• Heats the dishwasher tub to aid in heating wash water and improving drying
• Helps reduce leftover moisture on dishes and cutlery after a cycle
• Commonly replaces elements that show no heat, cause long cycles, or fail continuity checks
• Works with the dishwasher's control system to maintain correct operating temperatures

• Disconnect power to the appliance before starting any repair
• Access may require removing the dishwasher kick panel and lower access components
• Handle carefully to avoid damage

This replacement electrical switch restores reliable on/off control to the circuit it serves in your appliance. A worn or heat-damaged switch can cause intermittent response or no operation; replacing it helps the selected function engage consistently.

• Controls electrical power to a specific component or the entire unit
• Provides positive on/off switching for the selected function
• Common symptoms of a failed switch: no power/no start, intermittent operation, or a function stuck on/off
• May show heat discoloration, arcing marks, loose/broken terminals, or a spongy/loose actuator

• Disconnect electrical power before servicing; shut off gas/water if applicable
• Access the switch location and note/photograph wire positions
• Transfer wires one at a time to the new switch and fully seat terminals
• Securely mount the switch, reassemble, restore power, and test operation

This replacement push-button switch restores reliable user input for compatible Bosch appliances, letting controls respond correctly and safely. It replaces a worn or non-responsive front-panel switch to help restore normal operation. What it does

• Sends the user's on/off or function selection signal to the appliance control board
• Commonly replaces a switch that is stuck, intermittently responsive, or unresponsive
• Helps stop false inputs or unintended starts caused by a failing button
• Works as a direct-fit control component when matched to the exact part number

• One replacement push-button switch

• Disconnect power (unplug appliance or shut off circuit breaker) before servicing
• Access may require removing a control panel; keep fasteners and trim parts separate
• Handle electrical connectors carefully and match wiring positions when reassembling

This pushbutton switch controls power to the appliance circuit. When pressed, it opens or closes the electrical path to turn the function on or off, restoring reliable button response and consistent operation.

• Controls on/off power for the selected function
• Worn or stuck switch can cause no response when pressing the button
• Intermittent, delayed, or stuck-on operation may indicate switch failure
• Physical damage or heat discoloration on terminals are common failure signs

• Disconnect power before service to avoid electrical shock
• Note wire positions or photograph connections before removal
• Transfer wires firmly to the new switch; ensure terminals are fully seated
• Test function before reassembling panels

This control panel replaces the front user interface to restore button and display control on compatible Bosch appliances. It provides the visible buttons and touch/press surface needed to select cycles and options. What it does:

• Houses the appliance's buttons and display area so you can operate cycles and settings.
• Restores responsive button input and visible indicators when the original panel is cracked, faded, or nonfunctional.
• Helps resolve issues like unresponsive controls, missing indicator lights, or damaged outer trim.
• Serves as the cosmetic front surface for the control area.

• One control panel as shown.

• Disconnect power and water before starting any repair to prevent shock or damage.
• Minimal disassembly of the door or console may be required; keep screws and fasteners organized.
• Handle with care to avoid scratching the finish or damaging clips and mounting tabs.
• If the panel connects to a separate electronic control board, verify connector orientation and seating during reassembly.