Parts for Electrolux E30EW75PPSA: 02 - Control Panel Parts

This replacement cover restores the appliance's exterior and protects internal components from dust and damage. It replaces a worn or missing access panel to keep the unit looking finished and functioning safely. What it does:

• Covers and protects internal components, wiring and connectors from debris and accidental contact
• Restores the appliance's finished appearance by replacing a cracked, dented or missing panel
• Helps reduce vibration noise and keeps internal parts secured in place
• Commonly used when the old cover is damaged, loose, or causing rattling

• Always unplug the appliance or disconnect power at the breaker before starting repairs
• Use basic hand tools to remove fasteners; keep removed hardware for reinstallation
• Handle edges carefully—metal or plastic panels can have sharp edges

This main electronic control board manages refrigerator functions and user controls so the appliance runs and responds correctly. Replacing a failed board restores control logic and communication between the user interface and components. What it does

• Receives input from the control panel and sends commands to compressor, fans, defrost heater, and valves
• Regulates timed cycles for defrost and cooling to maintain proper operation
• Helps start or stop components based on sensor signals and user settings
• Common symptom linkage: unresponsive controls, no cooling or intermittent cooling, or erratic appliance behavior

• Disconnect power to the appliance before attempting replacement
• Handle the board by edges and avoid static discharge; use an anti-static strap if available
• Confirm connector locations and orientations before unplugging; replace one-to-one

This electronic control board manages the refrigerator's main functions and user controls, restoring responsive operation and automated cycles when the original board fails. It replaces the unit's central logic for temperature, defrost, and compressor control. What it does:

• Controls compressor, fans, and defrost timing to maintain set temperatures
• Processes user inputs and display signals so buttons and indicators respond correctly
• Stops or prevents normal operation when a board fault occurs (symptoms: unresponsive controls, blank or erratic display)
• Can cause cooling or defrost failures when the control electronics malfunction

• Disconnect power before attempting service to avoid shock or damage
• Handle board by edges and avoid touching components to prevent ESD damage
• Verify error codes and wiring harness connections before replacing the board

This is a replacement mounting screw used to secure the appliance power/control board, restoring a solid electrical board connection and preventing vibration or loose contacts. Ideal for repairs where the original screw is missing or damaged. What it does:

• Fastens the power/control board to the appliance chassis to keep connections stable
• Helps prevent board movement that can cause intermittent electrical issues or noise
• Restores proper mounting after service or component replacement

• Turn off and unplug the appliance before starting any repair
• Use appropriate screwdriver and avoid over-tightening to prevent board or thread damage
• Wear eye protection and keep small parts away from children and pets

This electronic control board replaces the oven's primary control module to restore timing, display, and bake/broil cycle control. It fixes issues where the range won't start, displays errors, or has unresponsive touch controls. What it does:

• Manages oven temperature settings, timed bake cycles, and user interface commands
• Controls relays and sends signals to heating elements and sensors
• Helps stop incorrect displays, unresponsive buttons, or intermittent operation
• Works with safety interlocks and diagnostics to maintain normal oven functions

• One electronic control board as shown

• Disconnect power at the breaker before accessing the control panel to avoid shock
• Handle the board by edges and avoid touching components to prevent ESD damage
• Confirm connector locations match before installing; secure mounting screws and connectors

A single replacement mounting screw used to secure appliance panels, trim, or small brackets. Restores proper fastening so parts stay aligned and eliminates loose or rattling components. What it does:

• Fastens panels, brackets, or trim pieces to the appliance frame
• Secures components that vibrate or shift during normal use
• Helps stop rattling, misalignment, or gaps caused by a missing or loose screw
• Works as a direct hardware replacement where the OEM screw is required

• One screw

• Use the correct driver and size to avoid stripping the head
• Tighten until snug; do not over-torque to prevent thread damage
• Disconnect power or follow appliance safety procedures before accessing internal components
• Replace all like fasteners for best fit

This spacer sets the correct gap between mating parts in your appliance's assembly, preventing rubbing and misalignment. Replace a missing or worn spacer to restore a solid fit, reduce noise, and protect surrounding components.

• Maintains proper spacing between components for correct alignment and operation
• Reduces metal-to-metal contact, squeaks, and premature wear
• Helps fasteners and panels seat securely
• Typical symptoms when failed: loose or rattling parts, uneven gaps, or visible wear marks

• Disconnect power; for gas models, shut off the gas. Allow the appliance to cool completely.
• Access the assembly per your model's diagram; note the original orientation/stack-up before removal.
• Reuse original fasteners if serviceable; hand-start threads and tighten snugly to avoid damaging the spacer.
• Verify alignment and clearances before fully reassembling. Quantity and location vary by model.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.