Parts for Frigidaire FGEC3648US: Control Panel Parts

This main top is the finished cooktop surface that supports burners and grates, keeps internal components protected, and provides a clean, stable area for cooking. It restores a level, finished appearance and safe burner seating. What it does:

• Provides the primary surface for burners and grates to sit on
• Protects internal cabinet and components from spills and heat
• Helps keep burners aligned for proper ignition and flame shape
• Replaces cracked, dented, warped, or heavily corroded cooktop surfaces that affect stability or appearance

• Disconnect power and gas supply before beginning any service
• Remove burners, grates, and control panel as needed to access mounting screws
• Handle the panel carefully to avoid chipping or scratching the finish; two people may be needed for safe removal/installation
• Follow OEM instructions for correct reassembly and torque specs

This main top is the large cooktop panel that provides the flat surface and mounting for burners and controls, restoring a finished appearance and stable support for cooktop components. Ideal when the top is bent, cracked, or cosmetically damaged. What it does:

• Replaces the cooktop surface that supports burners, grates, and control components
• Restores a flat, secure mounting surface so burners and knobs align correctly
• Helps eliminate drafts and heat escape caused by warped or damaged tops
• Improves appearance when the original top is chipped, dented, or paint-worn

• One main top (cooktop surface) as shown

• Disconnect electrical power (and gas supply on gas ranges) before starting work
• Remove burner grates, burner heads, and any trim pieces to access mounting screws
• Lift and position carefully—edges can be sharp; have a second person assist if the top is large
• Reinstall all burner components and verify proper alignment and function before use

This single replacement control knob restores safe, precise control of your appliance's settings. It fits standard control stems to replace a cracked, worn, or missing knob so you can turn burners or temperature dials smoothly. What it does:

• Replaces a damaged or missing control knob so you can select heat or function settings reliably.
• Provides a secure grip and clear pointer alignment for accurate setting selection.
• Stops slipping or spinning on the control shaft when the original knob is worn.
• Helps eliminate intermittent contact or incomplete turns caused by broken knobs.

• Disconnect power to the appliance before servicing to avoid injury.
• Pull the old knob straight off the control stem; press the new knob onto the stem until fully seated.
• Align the pointer on the knob with the control indicator for correct settings.
• If the knob does not seat properly or the control shaft is damaged, do not force—inspect the shaft and replace damaged components as needed.

This replacement control knob restores user control of your range or oven by turning temperature and function settings smoothly and visibly. It's a direct-fit style knob used on many Frigidaire cooktop and oven models. What it does

• Provides a secure grip to adjust burner or oven settings.
• Replaces cracked, stripped, or missing knobs that prevent accurate control.
• Restores tactile click and alignment for clear setting indication.
• Helps prevent accidental setting changes with a snug fit on the control shaft.

• One control knob as pictured.

• Pull the old knob straight off the control shaft and push the new knob on until fully seated.
• Confirm the shaft and knob orientation match so indicator lines align with control markings.
• Unplug the appliance or shut off power at the breaker before accessing internal controls when disassembly is required.
• If the knob feels loose or won't seat, inspect the control shaft for damage—do not force the knob.

The Control Knob is an OEM part for Frigidaire cooktop. It functions as the interface to select cooktop burner settings or oven temperature/function options. 

Located on the surface of the range control panel, the knob directly controls gas valves via the electronic control board behind the panel. Turning it selects precise flame levels or bake/broil temperatures with a click into place.

Causes of a bad control knob can include worn drips from steam cleaning, loosened mounting clips from normal rotating wear, or cracks from accidental impact. 

Symptoms of a bad control knob include: 

• Burners or oven not responding to setting adjustments
• Knob easily coming loose or off the control shaft 
• Flames not igniting or staying lit at selected levels

Replacing the knob with a genuine Frigidaire part ensures dependable inputs to the control system. This supports accurate, safe range operation. Compatible with Electric and Gas ranges from Electrolux, Gibson, Kelvinator and Kenmore as well.

This lid switch is the user-actuated door safety switch that detects when the washer lid is closed so cycles can start or continue. A direct replacement for a failed lid-actuation switch to restore normal start/stop behavior. What it does:

• Detects lid/door position and signals the washer control to allow motor operation
• Prevents the washer from starting or spinning when the lid is open
• Commonly linked to symptoms like a machine that won't start, won't spin, or stops mid-cycle
• Replaces a worn or failed switch that no longer makes reliable contact

• One lid (door) switch

• Disconnect power (unplug the appliance or shut off breaker) before starting any work
• Remove the cabinet or access panel per the appliance service guide to access the switch
• Handle the switch and wiring harness gently; unplug connector before removing the switch
• Test the switch with a multimeter for continuity before replacement

This genuine replacement switch kit restores reliable electrical switching for your appliance's control or component circuit. Replacing a worn or failed switch helps bring back consistent on/off or mode selection response and prevents intermittent operation.

• Opens and closes the electrical circuit to control a function or component
• Helps resolve no response when actuating the switch or intermittent operation
• Useful when the switch sticks, feels loose, or shows signs of arcing or heat damage
• Can address issues like inability to turn a function on/off or erratic behavior

• Disconnect power and allow components to cool before servicing
• Photograph or label wiring to ensure correct reconnection
• Transfer any brackets or terminals from the old switch if applicable
• Secure connections firmly; avoid overtightening and verify proper operation after reassembly

The Surface Element Switch is an OEM part for Frigidaire electric cooktops and ranges. It is an electronic component that controls the power supply to individual cooking elements on the surface.

Causes can be normal wear and tear over time, exposure to moisture, food spills or other contaminants on the cooktop. Physical damage from impacts could also cause switch failure.

Symptoms of a bad surface element switch include:

• Elements failing to heat up or staying hot even when controls are set to off
• Inconsistent or intermittent power to surface elements
• Loose, cracked, or non-responsive switches

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.