Parts for Frigidaire FGET3065PFF: Control Panel Parts

This replacement cover restores the appliance's exterior and protects internal components from dust and damage. It replaces a worn or missing access panel to keep the unit looking finished and functioning safely. What it does:

• Covers and protects internal components, wiring and connectors from debris and accidental contact
• Restores the appliance's finished appearance by replacing a cracked, dented or missing panel
• Helps reduce vibration noise and keeps internal parts secured in place
• Commonly used when the old cover is damaged, loose, or causing rattling

• Always unplug the appliance or disconnect power at the breaker before starting repairs
• Use basic hand tools to remove fasteners; keep removed hardware for reinstallation
• Handle edges carefully—metal or plastic panels can have sharp edges

This electronic control panel assembly replaces a damaged or unresponsive oven/range control interface to restore programming and user controls. It houses the keypad and display so you can select cooking modes, temperature and timers. What it does:

• Replaces the appliance's front control interface so buttons and display respond correctly
• Restores programming functions like bake, broil, timer and clock when the original panel fails
• Helps resolve symptoms such as unresponsive buttons, missing display segments, or intermittent control behavior
• Works as the main user interface between you and the range/oven control electronics

• One control panel assembly

• Disconnect power (unplug or shut off breaker) before servicing to avoid shock
• Requires basic disassembly of the oven/range console; handle the display and ribbon connectors carefully
• Retain all mounting hardware if reusing; confirm connector orientation before reassembly

The Control Board is an OEM part for Frigidaire wall ovens. It acts as the brain of the oven, responsible for managing all functions, from temperature regulation to timer settings. This control board ensures your oven responds accurately to your cooking selection, maintaining precise temperature and operation control, essential for achieving consistent cooking results.

Causes of a malfunctioning control board can include power surges, overheating, or component wear and tear.  

Symptoms of a bad Control Board include:

• Oven failing to heat or heating unevenly
• Display errors or the display not functioning at all
• Oven turning off unexpectedly during use
• Unresponsive controls or settings that do not adjust according to user input

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Control Board is an OEM part for Frigidaire ranges and ovens. It is responsible for managing various functions and operations of the appliance. This crucial component receives input from the control panel and user settings, and then translates these inputs into commands for the different components of the range, such as the oven heating elements, bake and broil functions, temperature regulation, and timer operations.

Causes of a faulty Control Board can be related to electrical issues, such as power surges, short circuits, or internal component failure due to age or wear and tear.

Symptoms of a bad Control Board can include: 

• Oven not heating or maintaining temperature properly
• Oven control panel not responding or displaying erratic behavior 
• Specific oven functions not working correctly
• Error codes or warning lights illuminated on the control panel

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This spacer sets the correct gap between mating parts in your appliance's assembly, preventing rubbing and misalignment. Replace a missing or worn spacer to restore a solid fit, reduce noise, and protect surrounding components.

• Maintains proper spacing between components for correct alignment and operation
• Reduces metal-to-metal contact, squeaks, and premature wear
• Helps fasteners and panels seat securely
• Typical symptoms when failed: loose or rattling parts, uneven gaps, or visible wear marks

• Disconnect power; for gas models, shut off the gas. Allow the appliance to cool completely.
• Access the assembly per your model's diagram; note the original orientation/stack-up before removal.
• Reuse original fasteners if serviceable; hand-start threads and tighten snugly to avoid damaging the spacer.
• Verify alignment and clearances before fully reassembling. Quantity and location vary by model.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling
• Direct replacement for lost, damaged, or rusted hardware
• Keeps covers and brackets safely in place

• Disconnect power before servicing; for gas appliances, also shut off gas supply
• Match one-for-one with the original screw; verify length/type before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver bit to prevent stripping the screw head