Parts for Frigidaire FGMC2765PFJ: Control Panel Parts

This electronic control board manages the appliance's user interface and core functions so cycles, timing and features run as intended. Replacing a failed controller restores reliable control and proper operation. What it does:

• Interprets user inputs and sends commands to motors, valves and heaters
• Regulates timing, cycle selection and display/status indicators
• Stops or prevents operation when internal faults occur
• Can resolve symptoms like unresponsive controls, incorrect cycles, error codes or no power to functions

• One electronic control board (main controller)

• Disconnect all power before accessing the control panel to avoid shock
• Handle the board carefully; avoid static discharge and bent pins
• Keep original mounting hardware and wiring order for correct reinstallation

This control panel assembly is the user interface for your oven/range, housing the touchpads, buttons and display so you can set ovens, timers and modes. It replaces a worn, cracked or unresponsive console to restore normal control operation. What it does:

• Provides the front-facing controls and display for oven and range functions
• Registers user input (buttons/touchpads) to send commands to the appliance control board
• Displays time, temperature, cooking modes and error messages
• Helps resolve symptoms like unresponsive buttons, blank or garbled display, or missing function selection

• One control panel assembly (console) as shown

• Disconnect power at the breaker before attempting any service
• Handle the assembly and display area carefully to avoid scratching or cracking
• Some models require removal of trim or screw fasteners and unplugging a wiring connector; keep screws and hardware secure for reassembly

This push button is a direct-fit control-panel button that lets you reliably actuate a selector or function on your appliance. Restores a worn, cracked or non-engaging button to normal operation and appearance. What it does:

• Serves as the user-facing button that presses into a control switch or micro-switch behind the panel
• Replaces cracked, broken, missing or faded buttons that no longer engage or feel secure
• Helps resolve symptoms such as a button that sticks, won't depress, or fails to trigger the underlying control
• Restores the control panel's appearance when the original button is cosmetically damaged

• One push button as shown

• Turn off and unplug the appliance before beginning any repair
• Most installations are a simple snap-in or trim removal to access the button; use care removing bezel or fascia
• Test the button operation after reassembly to ensure proper engagement

A replacement tension spring used to restore normal movement and positioning for the affected appliance component. Replaces a worn or broken spring to help parts return to their intended position and reduce loose or uneven operation. What it does:

• Provides tension or counter-force for a door, drawer or linkage so the part moves smoothly and returns to position.
• Restores alignment and prevents sagging, slamming, or parts that don't stay in place.
• Reduces noise and uneven movement caused by a stretched or broken spring.
• Useful when a worn spring causes intermittent operation or poor component response.

• Disconnect power and water before servicing. Wear eye protection and gloves — springs can release suddenly.
• Inspect mounting points, clips and anchors; replace any damaged hardware to ensure proper function.
• Use appropriate tools (needle-nose pliers, spring hook) and follow OEM instructions for safe installation.

This is a genuine mounting screw used to secure appliance components and panels for a safe, stable fit. It replaces a lost or damaged fastener to restore proper alignment and reduce rattles or loose trim. What it does:

• Secures panels, trim, brackets or small assemblies to the appliance frame
• Prevents vibration-related noise and loose or sagging parts
• Restores proper fit after repair or disassembly
• Useful when the original screw is stripped, missing, or broken

• One mounting screw

• Use the correct screwdriver or bit to avoid stripping the head
• Power off and unplug the appliance before servicing when applicable
• Keep removed hardware organized to ensure correct reassembly
• If threads are damaged, replace with the specified OEM screw only

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling
• Direct replacement for lost, damaged, or rusted hardware
• Keeps covers and brackets safely in place

• Disconnect power before servicing; for gas appliances, also shut off gas supply
• Match one-for-one with the original screw; verify length/type before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver bit to prevent stripping the screw head