Parts for Frigidaire FPET3077RFA: 02 - Control Panel Parts

This shield is a small protective trim piece used on select Frigidaire appliances to cover and protect openings and mounting areas from debris and wear. It helps maintain proper airflow and keeps internal components shielded. What it does:

• Covers exposed openings or fasteners to prevent debris buildup and reduce wear
• Helps direct airflow and protect seals or insulation from damage
• Reduces the chance of contact with moving or hot components
• Commonly replaced when cracked, warped, or missing

• Designed for a simple replacement; usually secured with screws or snap-fit tabs
• Turn off and unplug the appliance before servicing
• Handle gently to avoid bending tabs; align mounting holes before fastening

This replacement shield is a molded protective cover that shields internal components from debris and directs airflow for reliable operation. It restores proper component protection and helps reduce noise from loose or damaged covers. What it does

• Protects wiring, sensors, and nearby components from contact, dirt, and debris
• Helps maintain correct airflow routing around internal parts
• Reduces rattles or vibration noises caused by a broken or loose shield
• Prevents accidental contact with moving or hot parts during use

• One replacement shield

• Disconnect power before attempting any service to avoid shock or injury
• Inspect mounting tabs and fasteners; replace any damaged clips for secure fit
• Use basic hand tools; avoid forcing the part to prevent breakage

This door switch detects when the appliance door is opened or closed and sends the signal to control lights or functions, restoring normal operation and safety. Ideal when lights won't turn on or cycles don't start. What it does:

• Opens and closes an electrical circuit when the door is ajar or shut
• Commonly used to turn interior lights on/off or enable control features
• Designed as a direct-fit replacement when the original door switch is faulty

• One replacement door switch

• Disconnect power before servicing to avoid shock or damage
• Access may require removing door trim or panel—refer to your model's service guide
• Handle terminals carefully; confirm connector orientation before reconnecting

This potentiometer is the user control variable resistor that lets the appliance vary a setting (speed, temperature or timer) from the front control panel. Replacing a faulty potentiometer restores responsive, smooth control. What it does:

• Converts knob rotation into an adjustable electrical signal for the appliance control
• Restores consistent setting changes when knob rotation previously produced no response
• Eliminates erratic or jumpy adjustments caused by worn or dirty contacts
• Used wherever a variable user input is required (e.g., temperature, speed, or timer control)

• Disconnect power to the appliance before starting any repair to avoid shock
• Access usually requires removing the control panel or console; keep track of screws and fasteners
• Note and label any wiring connections before disconnecting for correct reassembly

The Indicator Light Lens is an OEM part for Frigidaire ranges. This component covers and protects the indicator light, which signals when a burner or the oven is on, providing a visual cue for users to ensure safe operation.

Over time, the indicator light lens can become damaged or discolored due to heat exposure, regular cleaning, or accidental impacts. Causes of a bad indicator light lens include cracking, warping, or clouding that obscures the light.

Symptoms of a bad indicator light lens include:

• The indicator light not being clearly visible
• Cracks or breaks in the lens
• Discoloration or cloudiness that diminishes the brightness of the light
• The lens becoming loose or falling off

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This interior light lamp assembly provides illumination inside the appliance so you can see contents clearly. It replaces a burned or damaged refrigerator/freezer interior lamp to restore usable lighting. What it does:

• Houses and secures the interior bulb to provide cabinet illumination
• Replaces a cracked, discolored, or non-functioning light assembly
• Helps stop flickering or intermittent lighting when the original unit is faulty
• Works with the existing bulb and wiring harness to restore normal light operation

• Disconnect power to the appliance before replacing the lamp to avoid electric shock
• Handle the lens and bulb carefully; wear gloves to avoid fingerprints on bulbs if replacing
• Check bulb type and socket condition; replace bulb separately
• If wiring or mounting clips are damaged, inspect and replace those components as needed

This interior refrigerator light bulb provides the lamp needed to illuminate the fresh food compartment, making it easier to find items when the door is open. It replaces a burnt or dim interior lamp to restore visibility. What it does:

• Replaces the refrigerator's interior lamp so the compartment lights when the door opens
• Restores normal brightness for safer, easier access to food and containers
• Common symptom: no light or a dim light when the door is opened
• Fits into the existing lamp socket and works with the existing lens or cover

• Disconnect power to the appliance before servicing to prevent shock
• Allow a recently used bulb to cool before removing to avoid burns
• Remove the lamp cover, then pull or twist the old bulb out and install the replacement
• Handle the bulb with a cloth or gloves; avoid getting oils from skin on the bulb surface

This truss-head machine screw secures a switch to its mounting bracket or panel. Replacing a worn or missing screw restores a solid, aligned switch fit for reliable operation.

• Fastens the switch body to a bracket or chassis panel
• Helps keep the switch aligned for consistent actuation
• Replaces stripped, corroded, or missing mounting hardware
• Common symptoms: loose or wobbly switch, misalignment, rattling or vibration around the switch area

• Disconnect power to the appliance before servicing
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Verify thread size and length match the original hardware
• If multiple screws secure the switch, replace them in a consistent pattern to maintain alignment

This electronic control board governs your range's oven functions and display. Replace a failed board to restore temperature regulation, bake/broil operation, and a working clock/timer when the display is dead or buttons stop responding.

• Regulates oven temperature by switching power to the heating elements
• Drives the digital clock/timer and processes keypad inputs
• Coordinates oven modes such as bake and broil
• Common failure signs: no heat, dead or dim display, unresponsive buttons, or recurring error codes

• Disconnect power at the breaker before servicing and verify no voltage is present
• Access through the control panel; move wires and any mounting parts to the new board one at a time
• Handle the board by the edges and use anti-static precautions
• Restore power and test oven functions and the display after installation

This electronic control assembly manages the appliance's user interface and cycle operations, restoring responsive controls and proper cycle sequencing. It replaces a failed or unresponsive control module to regain normal control function. What it does:

• Interprets button/knob inputs and starts or advances wash/dry/cycle operations
• Controls timing, cycle selection, and communication with sensors and motors
• Can stop unsafe or incomplete cycles when control faults occur
• Common symptoms: unresponsive buttons, blank or frozen display, cycles that won't start or advance, or intermittent operation

• Disconnect power before starting work to avoid shock or damage
• Handle the board by edges and avoid static discharge; wear an ESD strap if available
• Verify harness connectors are fully seated and undamaged before reassembly
• Test function with the cabinet open where safe, then reassemble once operation is confirmed

Specs: 8 x 0.750

This wiring harness connects and routes power and signals between appliance components, restoring reliable electrical connections and resolving intermittent or non-working circuits. It's a direct-fit replacement designed to match OEM wiring layouts. What it does:

• Replaces worn or damaged wiring to restore power and signal paths
• Helps fix intermittent operation, components not receiving power, or burned/shorted wiring symptoms
• Maintains correct plug/connector locations and wire lengths for proper fit
• Keeps control and component circuits isolated and organized to prevent shorts

• One complete wiring harness assembly with factory-style connectors

• Disconnect power before starting any repair to avoid shock or injury
• Handle connectors by the housings; do not pull on individual wires
• Route harness following original wire clips and mounting points for secure fit
• If connectors are corroded or terminals are damaged, replace them before reassembly

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.