Parts for Ge PHS930YP7FS: Control Panel Parts

The Oven Control Panel Trim Kit is an OEM part compatible with GE ranges and wall ovens. It houses and frames the control panel interface, touch controls, display screen, and related electronic components of the appliance. The trim panel serves to protect these sensitive interior systems.

Causes of a bad control panel trim kit can include cracks, peeling, discoloration, or other signs of wear and damage due to repeated heat exposure during baking and roasting. The trim surrounds oven controls that endure temperature fluctuations each time the door is opened.

Symptoms of a bad oven control panel trim kit include: 

• Glitches or faulty responses from touch controls
• Water leaks behind or around the control panel 
• Visible cracking, peeling, or broken plastic sections
• Sensitivity issues or unresponsive buttons

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore wall oven models.

This housing transceiver is the outer mounting enclosure that secures and protects the appliance's transceiver assembly, helping maintain reliable signal and control communication. It replaces cracked or broken housings to restore proper fit and protection. What it does:

• Holds and protects the wireless/transceiver module and related wiring from physical damage
• Helps maintain proper alignment and connection to the appliance control assembly
• Common symptom: damaged or cracked housing that exposes electronics or prevents secure mounting
• Common symptom: intermittent signal or communication issues when the transceiver is loose or misaligned

• One housing transceiver

• Disconnect power to the appliance before beginning any repair to avoid shock or component damage
• Handle the transceiver and circuit connections carefully to avoid bending pins or ESD damage
• Installation typically requires removing the control console or access panel and a few fasteners; keep track of screws and gaskets

This electrical jumper links two terminals within the appliance's wiring to restore proper continuity for the affected circuit. Replace a burnt, damaged, or missing jumper to bring the related function back to reliable operation.

• Bridges terminals to complete or modify an electrical circuit as designed by the manufacturer
• Helps address symptoms like a specific feature not working, intermittent operation, or no power to a component
• Replace if the original shows heat damage, broken leads, or loose connections
• Direct replacement for the original jumper used in the wiring harness

• Disconnect power at the breaker or unplug the appliance before servicing
• Use your model's wiring diagram to locate the correct jumper
• Label/photograph wire positions and transfer one connection at a time
• Ensure connectors are fully seated; do not alter the factory wiring configuration

This stainless control panel overlay replaces the front-facing control surface on compatible ranges and wall ovens, restoring a clean appearance and access to the touch controls and Wi-Fi status indicators. It's the visible overlay that users interact with when selecting settings. What it does:

• Covers and protects the underlying control board while providing labeled touch/press areas for oven or range functions
• Includes the Wi-Fi indicator/area so wireless status is visible and operable
• Restores a uniform stainless finish and readable control legends for normal operation
• Helps address cosmetic damage, faded labels, or cracked/peeled overlay surfaces

• One stainless control panel overlay (with Wi-Fi area) as shown

• High-level replacement: remove the range/oven control console trim and fasteners to swap the overlay; retain underlying electronics and switches
• Power safety: disconnect power at the breaker before servicing to avoid shock or damage
• Handle parts carefully to avoid scratching the stainless finish and to align control cutouts precisely

This control panel gasket seals the cooktop/console area to keep moisture, grease and crumbs out of the range control cavity for cleaner operation and improved component protection. Replaces a worn or missing console seal to reduce debris buildup and possible shorting. What it does:

• Forms a tight seal between the control panel and console to block grease, spills and food particles.
• Helps prevent moisture and debris from reaching electronic controls and switches.
• Reduces rattling or movement by cushioning the control panel.
• Commonly replaced when torn, flattened, missing, or allowing visible gaps at the control area.

• Disconnect power to the appliance before starting any work.
• Removal typically requires lifting or removing the control surface—follow the range/oven service instructions.
• Clean mating surfaces of old adhesive, grease and debris before installing the new gasket.
• Align gasket carefully and press firmly; replace any fasteners or adhesive strips used by the manufacturer.

The 14 Gauge Grounding Lead Wire is an OEM part for GE electric ranges. It grounds interior metal components for enhanced safety performance.

Symptoms of a failed grounding lead wire include:

• Risk of electric shocks from improperly earthed metal surfaces  
• Circuit breaker trips or fuse blows from inadequate grounding  
• Appliance malfunctions and intermittent power from faulty ground path

Causes can be fatigue cracks from metal expansion/contraction cycles over time, exposed strands from abrasion damage, and loose terminal connections.

This OEM part is also compatible with Hotpoint and RCA electric range models.

The Insert Plug is an OEM part for GE electric ranges and cooktops. It serves to seal any unused gas orifices to prevent leaks, drafts, and infiltration of foreign materials.

Symptoms of a faulty or missing plug include: 

• Gas leaks discernible by smell around unlit burner ports
• Drafts affecting oven or broiler performance  
• Contaminants obstructing gas flow or pilot ignition

Causes are typically loose or lost plugs from normal use and cleaning over time. Replacing with this genuine GE part restores safety and maximum efficiency. Compatible models include Hotpoint, RCA, and select Kenmore lines as well - securing all openings protects both you and your appliance. Avoid future issues and keep cooking functions running optimally.