Parts for Ge ZDP364LDP7SS: Control Panel Parts

Size: 8 - 32 inch.

This glass display is the replacement front glass for the appliance control panel. It restores a clean, readable surface for the controls and protects the underlying electronics from spills and debris. What it does:

• Replaces cracked, scratched, or chipped control panel glass to improve appearance and readability
• Protects the control board and touch/button assembly from spills, grease, and light impact
• Helps maintain proper user interaction with the oven/range controls when the original glass is damaged
• Matches the OEM shape and mounting points for a like-for-like fit when installed

• Disconnect power (unplug or shut off circuit breaker) before starting any work
• Remove control console trim and any fasteners carefully to avoid chipping the glass
• Handle glass edges with caution; wear cut-resistant gloves and eye protection

This control bracket secures the appliance control assembly to the cabinet, helping keep buttons, knobs, and the control board properly aligned for reliable operation. Designed to restore stable control-panel mounting after damage or wear. What it does

• Holds the control/module assembly in the correct position so front controls operate smoothly
• Prevents excessive movement or vibration that can cause intermittent button or knob issues
• Restores proper alignment after a broken or bent mounting tab
• Helps maintain electrical connections by stabilizing the control module

• Designed to replace a broken or bent bracket; inspect surrounding clips and fasteners for damage before installing
• Power off and unplug the appliance before attempting removal or installation to avoid shock
• Typical installation requires removing the control panel or console—retain screws and grounding hardware
• Handle the board carefully to avoid static discharge or connector damage

This LED board is the refrigerator interior light assembly that restores bright, even illumination inside the fresh-food compartment for easier visibility and safer food access. What it does

• Powers and distributes LED light to illuminate the refrigerator interior
• Replaces a failed or dimming light board to stop flicker or complete loss of interior lighting
• Ensures even light coverage across the compartment for better visibility
• Works with the refrigerator's existing light housing and connectors to restore normal operation

• One LED board

• Disconnect power to the appliance before starting any work
• Handle the board by its edges and avoid touching LED components or circuitry
• Remove shelves and trim as needed to access the light housing; keep track of screws and retainers
• Reconnect all wiring and verify proper operation before reassembling the compartment

This encoder assembly senses control-knob position and converts rotations into electronic signals for the range/oven control board, restoring accurate input and helping the control respond correctly to knob adjustments. What it does:

• Converts knob rotation into digital signals the control board uses to change settings.
• Replaces a worn or damaged encoder that can cause unresponsive or inconsistent control inputs.
• Commonly linked to symptoms like controls not changing settings, intermittent response, or incorrect selection tracking.
• Works with the console/control board to ensure knob position is detected reliably.

• Disconnect power to the appliance at the breaker before starting any work.
• Access usually requires removing the console or control panel; keep track of fasteners and any small brackets.
• Handle the encoder and any attached harness or ribbon carefully to avoid damage; align the shaft properly when seating the part.
• After installation, restore power and verify control responsiveness.

This electronic control and display assembly replaces a failed oven control so you can use the clock, touchpad and oven functions again. It restores the user interface and command signals between the console and oven controls. What it does

• Provides the clock and digital display for oven settings and timers
• Accepts touchpad/console input to select bake, broil, bake time and other functions
• Sends control commands to the oven's control board and heating elements
• Common symptoms: blank or flickering display, unresponsive touchpad/buttons, or loss of clock/timer functions
• Resolve intermittent control errors or inability to select oven modes when caused by a faulty display module

• One control display module

• Disconnect power at the breaker before starting; electrical shock hazard.
• Handle the module and ribbon/connectors carefully to avoid damage; observe anti-static precautions if available.
• Verify connector seating and secure mounting; do not force connectors.

This control panel and rail assembly replaces the front console and mounting rail for the oven/range control area, restoring a secure, finished console and support for the control components. Fits as a direct replacement for damaged or bent panels. What it does

• Replaces the oven/range front control console and the attached rail that secures control components.
• Restores a snug mounting surface for buttons, knobs and the display assembly.
• Helps stop rattling, misalignment, or exposed electronics from a damaged or bent panel.
• Returns a clean, finished appearance to the appliance's control area.

• One control panel and rail assembly as shown.

• Disconnect power to the appliance before starting — risk of electric shock.
• Handle trim and console parts carefully to avoid scratching or cracking the finish.
• Installation generally requires removing control housing screws and disconnecting any wire harnesses; retain fasteners and note harness locations.

This control knob lets you select burner or oven settings on your range or cooktop. It fits onto the control shaft; replacing a cracked or stripped knob restores a secure grip and accurate setting selection. What it does:

• Attaches to the valve/switch shaft to turn the surface burner or oven control
• Provides a clear pointer and comfortable grip for setting selection
• Common symptoms: cracked housing, stripped insert, loose/wobbly knob, or the knob falls off

• One control knob assembly

• Disconnect power and let the appliance cool; shut off gas if required by your model's manual
• Pull the old knob straight off the shaft—do not pry or twist the shaft
• Align the flat/keyed side of the new knob with the shaft and press straight on until fully seated
• Verify pointer alignment and smooth operation through all settings

A replacement thermostat knob assembly that restores reliable temperature selection and a clear indicator for your range or oven control. Replaces a cracked, stripped, or missing knob so you can set heat levels accurately. What it does

• Replaces a damaged or worn thermostat/control knob so the control shaft can be turned and settings selected
• Provides a visible pointer for temperature or function indication
• Stops slipping or spinning when the knob shaft is stripped or the original knob is broken
• Restores user control and improves safety by allowing secure, tactile adjustments

• One thermostat knob assembly

• Disconnect power to the appliance before beginning any service
• Knob typically pulls straight off the control shaft; align the internal spline and push fully onto the shaft until seated
• Do not force or hammer the part; check shaft and shaft adapter for damage before installing
• If the control shaft is damaged, replacement of the control may be required

Replacement knob assembly for the grill/broil thermostat — restores reliable temperature control and a secure grip. Easy to swap, it gets your grill control working smoothly so you can set heat levels with confidence. What it does:

• Restores positive engagement for the grill/broil thermostat when the original knob is cracked, missing, loose, or spins freely
• Allows accurate selection of grill temperature settings and repeatable control feel
• Direct-fit control knob designed to match the OEM spline and dial orientation for proper operation
• Durable construction made for regular oven use

• Disconnect power or unplug the appliance before beginning any repair
• Remove the old knob by pulling it straight off the control shaft; align the new knob with the control spline and push until fully seated
• No special tools typically required; if the knob is stuck, use gentle leverage and avoid metal prying that could damage the shaft
• Allow the appliance to cool before working near heating elements or hot surfaces

This oven bezel assembly is the front trim piece that restores the oven's look and protects the control area. It replaces a cracked, dented or worn bezel to return your oven's finished appearance and safeguard components. What it does:

• Covers and protects the oven control area and edges from spills, heat, and wear
• Restores a clean, factory appearance after cosmetic damage or corrosion
• Helps keep control switches and display area free from debris
• Commonly used when the front trim is bent, cracked or loose

• One oven bezel assembly

• Disconnect power to the appliance before starting any work
• Remove oven door or control panel fasteners as needed to access mounting screws
• Handle carefully to avoid scratching the finish or chipping nearby glass

Size: 8 - 18 ab hxw 5/8 s