Parts for Kenmore 790.40309411 (79040309411, 790 40309411): Control Panel Parts

The Rocker Switch is an OEM part for Frigidaire ranges and ovens. It is responsible for turning the interior oven light on and off. The light switch allows visibility of the oven cavity for viewing food during the cooking process.

Causes can include normal wear and tear over time, exposure to heat inside the oven cavity, or accidental damage.

Symptoms of a bad oven light rocker switch include:

• The oven light failing to illuminate when the door is opened
• The light remaining on even when the door is closed
• An inconsistent or flickering oven light
• The switch itself becoming loose, cracked, or non-responsive

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This control panel houses the oven/range user interface and provides the buttons and display used to select cooking modes, set temperatures and timers, and start/stop cycles. Replacing a damaged panel restores normal control access and readable indicators. What it does

• Provides the main user interface for selecting oven/range functions, temperatures and timers
• Transmits touch/press commands to the range control board so cycles start and stop as selected
• Restores readable labels and indicator lights when the original panel is cracked, faded, or damaged
• Helps resolve symptoms such as unresponsive buttons, missing or unreadable control labels, or intermittent command signals

• One control panel/console assembly as shown

• Disconnect power to the appliance at the breaker before beginning any work
• Basic hand tools are typically required; access may require removing the oven/range backguard or console trim
• Handle the panel carefully to avoid scratching the surface or damaging connectors

This control panel is the front console assembly that gives you a clean, usable interface for oven/range controls. It restores button access and the visible control surface so you can operate the appliance safely and conveniently. What it does:

• Replaces a cracked, faded, or damaged console surface so buttons and labels are readable
• Provides the mounting surface and connection point for control buttons and display components
• Helps resolve symptoms such as unresponsive or hard-to-press controls when damage is purely cosmetic/mechanical
• Restores the appliance's finished appearance and protects underlying electronics from debris

• One control panel (console) as pictured

• Disconnect power to the appliance before beginning work to avoid electrical shock
• Removal typically requires loosening mounting screws and carefully disconnecting any wire harnesses or snap-in switches
• Handle the panel and any attached switches or trim pieces carefully to avoid cracking or scratching
• If electronic control or display issues persist after replacing the panel, verify the control board and wiring harness are functioning before returning the part

The Control Board is an OEM part for Frigidaire ranges and wall ovens. It is the central processor governing all heating, cooking functions, timers and safety features through electronic controls.

Causes of a bad control board can include water damage accumulating over extended use, defects due to past power fluctuations or surges, or loose connections within the circuitry.

Symptoms of a bad control board include:

• Erratic or unresponsive heating element performance
• Inaccurate temperature readings and inconsistent regulation
• Faulty control buttons and display lights/graphics
• Continuous error codes and safety lockouts triggered

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Control Board Overlay is an OEM part for Frigidaire ranges. This part provides the buttons and display that control the range's functions. The overlay covers and protects the control board, ensuring that the buttons and display remain intact and operational.

Causes of a bad control board overlay can include wear and tear from regular use, exposure to heat and moisture, or damage from accidental impacts. 

Symptoms of a bad control board overlay include:

• Buttons that are unresponsive or hard to press
• Fading or peeling of the overlay graphics
• Inaccurate or malfunctioning display
• Visible damage or cracks on the overlay

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.