Parts for Maytag JGS9900CDS00: 03 - Control Panel Parts

This control panel is the front electronic interface that lets you select cycles and settings and communicates commands to the appliance for reliable operation. It restores user access when buttons, touchpads, or displays are unresponsive. What it does:

• Houses the control buttons/touchpad and display used to choose cycles and options
• Sends input signals to the appliance's control board so selected programs run correctly
• Commonly replaces panels with unresponsive buttons, intermittent controls, or damaged keypads
• Helps resolve issues where selections don't register or display feedback is missing

• Disconnect power before servicing to avoid shock or component damage
• Handle the panel and any attached ribbon cables carefully to prevent connector damage
• Follow your model's service manual for proper disassembly and reassembly steps

This control panel is the front electronic interface that lets you select cycles and settings and communicates commands to the appliance for reliable operation. It restores user access when buttons, touchpads, or displays are unresponsive. What it does:

• Houses the control buttons/touchpad and display used to choose cycles and options
• Sends input signals to the appliance's control board so selected programs run correctly
• Commonly replaces panels with unresponsive buttons, intermittent controls, or damaged keypads
• Helps resolve issues where selections don't register or display feedback is missing

• Disconnect power before servicing to avoid shock or component damage
• Handle the panel and any attached ribbon cables carefully to prevent connector damage
• Follow your model's service manual for proper disassembly and reassembly steps

Control panel provides the appliance's main user interface, housing the touchpads and display so you can choose cycles and options. Replaces a cracked, faded, or unresponsive control surface to restore normal operation. What it does:

• Houses the touch controls and display and relays user commands to the oven/range control electronics.
• Commonly replaces panels with unresponsive or intermittent touchpads.
• Addresses symptoms such as a blank, flickering or unreadable display and visible panel damage.
• Restores a clean, readable interface for selecting functions and settings.

• Disconnect power (unplug or shut off breaker) before starting any repair.
• Handle the display and overlay carefully to avoid scratching or damaging touch surfaces.
• Basic hand tools typically required; keep fasteners and mounting hardware for reassembly.
• The appliance still shows control errors after replacement, the main control board or wiring may need inspection.

Color: Black. For biscuit order 98008169. For white order WP98008544.

This electronic control board manages the oven's user interface and heating functions. It processes keypad inputs, controls the display, and switches bake/broil circuits so cooking cycles start, regulate temperature, and complete reliably.

• Interprets keypad/selector inputs to run oven functions and timed cycles
• Switches bake and broil circuits via onboard relays to reach and hold set temperature
• Operates the clock, timer, and status/error display
• Typical symptoms of a failed board: no heat, temperature swings, unresponsive controls, blank/flickering display, beeping or error codes

• Disconnect power at the breaker before servicing; oven controls carry live voltage
• Use ESD protection and handle the board by the edges to avoid static damage
• Note/photograph wire locations; transfer any model-specific overlay, brackets, or harnesses from the original control as needed
• Restore power and run a test bake to ensure proper heating and display operation

A shoulder screw that secures appliance components and provides a precise pivot or spacer point. Replaces a missing or worn screw to restore alignment, reduce rattling, and keep panels and assemblies securely in place. What it does:

• Provides a fixed-diameter shoulder for pivots, spacers, or mounting points in assemblies.
• Holds panels and moving components at the correct distance to prevent binding or friction.
• A missing or worn shoulder screw can cause misalignment, rattling, or loose parts during operation.
• Used where a smooth-bearing surface and controlled clearance are required between parts.

• Disconnect power to the appliance (unplug or shut off breaker) before servicing.
• Handle small fasteners carefully to avoid dropping into assemblies; magnetic pickup tools can help.
• Start threads by hand to avoid cross-threading; tighten snugly but avoid overtightening.

A shoulder screw that secures appliance components and provides a precise pivot or spacer point. Replaces a missing or worn screw to restore alignment, reduce rattling, and keep panels and assemblies securely in place. What it does:

• Provides a fixed-diameter shoulder for pivots, spacers, or mounting points in assemblies.
• Holds panels and moving components at the correct distance to prevent binding or friction.
• A missing or worn shoulder screw can cause misalignment, rattling, or loose parts during operation.
• Used where a smooth-bearing surface and controlled clearance are required between parts.

• Disconnect power to the appliance (unplug or shut off breaker) before servicing.
• Handle small fasteners carefully to avoid dropping into assemblies; magnetic pickup tools can help.
• Start threads by hand to avoid cross-threading; tighten snugly but avoid overtightening.

This genuine replacement control knob restores secure, easy-to-use control of your appliance's settings. It provides a clear grip and pointer so selections are easy to read and change. What it does

• Replaces a cracked, stripped or missing control knob so the control shaft can be turned smoothly
• Restores a visible pointer for accurate temperature or cycle selection
• Helps prevent slipping or accidental changes by providing a firm grip
• Fits on a splined control shaft to engage the selector mechanism

• One control knob

• Remove the old knob by pulling it straight off the control shaft; push the replacement knob fully onto the shaft until seated
• If knob is tight, pull with a steady, even force or use a non-marring puller tool
• Disconnect power to the appliance before servicing if removal requires access behind the control panel
• Do not force onto an incompatible shaft; verify spline match before installation