Parts for Kenmore 796.41162410 (79641162410, 796 41162410): Control Panel Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This cabinet assembly is the main outer housing that supports and protects the appliance's internal components while restoring appearance and structural integrity. Replacing a damaged cabinet helps stop drafts, reduce noise, and keep parts properly aligned. What it does

• Replaces the appliance's outer cabinet to restore proper fit and finish
• Protects internal components from dust, moisture, and physical damage
• Helps correct misalignment that can cause noise, rattles, or door fit issues
• Restores factory appearance for cosmetic damage, dents, or corrosion

• One cabinet assembly as shown

• Installation may require panel removal and reassembly of internal components
• Disconnect power and any water supply before starting work to avoid electrical shock or leaks
• Keep fasteners and trim organized during disassembly to ensure correct reinstallation
• Inspect gaskets, clips, and related fasteners and replace if worn or damaged

The Shipping Bolt Assembly is an OEM part for LG washing machines. This assembly is used to secure the washer drum during transportation, preventing it from moving and getting damaged. Shipping bolts are essential for maintaining the integrity of the washing machine when it is being moved or installed.

Causes of a bad or missing shipping bolt assembly include improper handling during moves, wear and tear from multiple uses, or not reinstalling them when relocating the washer. Ensuring that the shipping bolts are in place is crucial for protecting the internal components of the washer during transit.

Symptoms of a missing or damaged shipping bolt assembly include:

• Excessive movement or shaking of the drum during transportation
• Internal components of the washer getting damaged during a move
• Difficulty in securing the drum for transport
• Noise or instability during washer installation

This OEM LG part is also compatible with Sears/Kenmore.

This replacement bolt assembly restores a secure connection between internal components, helping maintain proper alignment and quiet, stable operation. Use it to replace hardware that is missing, stripped, or damaged to keep parts firmly fastened. What it does

• Fastens mating parts according to the original design
• Helps prevent loosening that can lead to vibration or rattling noises
• Maintains alignment for reliable performance
• Replaces corroded, cross-threaded, or missing hardware

• One bolt assembly

• Disconnect power (and shut off water, if applicable) before servicing
• Support the component being fastened; start threads by hand to avoid cross-threading
• Tighten to manufacturer guidelines; do not overtighten
• Inspect related washers/spacers and replace if worn or distorted

Secures the washer’s tub and basket during moving to prevent internal damage. If the originals are missing after a move, install replacements for transport and remove them before using the washer.

What it does

• Locks the tub and basket to limit movement in transit
• Helps prevent suspension damage and internal rattles while relocating
• Replaces missing, bent, or stripped transport bolts
• Useful for moves, storage, or service shipments

What’s included
One shipping bolt assembly (sold individually).

Install notes

• Unplug power and turn off water before service
• Insert through the rear panel into the designated mounting point; tighten snugly—don’t overtighten
• Do not operate the washer with shipping bolts installed; remove all bolts after placement
• Some models use multiple bolts and lengths—match count/positions to your owner’s manual

Usage tip
After removal, bag and tape the bolts to the cabinet so they’re on hand for the next move.

This display power control board assembly powers and manages the appliance's front display and touch/interface controls, restoring visible display and responsive panel operation for electronic control panels. What it does:

• Supplies power and regulation to the front display and LEDs
• Relays user inputs from touchpads/buttons to the main control system
• Helps prevent flickering, blank display, or non-responsive control panels
• Can resolve intermittent display failures, error messages, or unlit control panels

• Disconnect power to the appliance before starting any repair.
• Handle the board carefully and avoid static discharge; ground yourself or use an ESD wrist strap.
• Match the part number and connector orientation to the original before installing.
• Test the board and panel function before reassembling the housing.

This door hinge bracket mounts the hinge to the washer's front cabinet, keeping the door aligned so it closes and seals properly. A bent or broken bracket can lead to door sagging, poor latching, or leaks at the door.

• Secures the door hinge to the washer's front panel/cabinet
• Supports door weight to maintain alignment
• Helps preserve proper door-to-gasket contact for sealing
• Typical symptoms: door sags or rubs, won't close/latch, or water leaks at the door

• Disconnect power and shut off water before servicing.
• Support the door before removing hinge/bracket screws to prevent strain.
• Transfer the hinge to the new bracket and reinstall using existing hardware.
• Align the door and ensure latch engagement and gasket seal before fully tightening.

The Outer Door Boot Seal Clamp is an OEM part for LG washing machines. This clamp secures the outer door boot seal, ensuring a tight seal to prevent water leaks during the wash cycle.

You should replace the outer door boot seal clamp if it becomes damaged or loses its tension, which can happen due to regular use, exposure to harsh cleaning agents, or physical wear and tear.

Symptoms of a bad outer door boot seal clamp include:

• Water leaks from the door area during the wash cycle
• Loose or shifting door boot seal
• Difficulty in closing the washing machine door securely

This OEM LG part is also compatible with Sears/Kenmore.

This hinge assembly supports and pivots the appliance door or lid. Replacing a worn or damaged hinge restores smooth operation, keeps the door aligned with the cabinet, and helps ensure proper closing and consistent seal engagement.

• Provides the pivot point for the door/lid to open and close
• Supports door weight to maintain alignment with the frame
• Helps the door close flush to engage latches/seal properly
• Common symptoms: door sags or rubs, won't close fully or pops open, excessive play, squeaking or binding

• Disconnect power and support the door before removing hinge fasteners
• Mark or photograph hinge orientation and any spacers/washers for accurate reassembly
• Transfer any reusable components from the old hinge, if present
• Tighten fasteners securely and adjust alignment as needed

This is a complete outer refrigerator door assembly designed to replace a damaged or worn door and restore proper closure, appearance, and insulation. It returns the door's function and helps maintain correct cold temperatures inside the cabinet. What it does:

• Replaces a dented, cracked, or bent outer door to restore a flush fit and proper sealing
• Houses door-mounted components (shelves, trim) and provides the mounting surface for hardware
• Restores proper door alignment so the gasket can seal and prevent cold air loss
• Helps stop moisture buildup and temperature fluctuation caused by a damaged door

• Disconnect power and empty door-mounted items before starting
• Door assemblies are heavy and awkward—use two people to avoid injury or damage
• Reuse existing hinge hardware; follow manufacturer torque and alignment steps
• Handle glass and trim carefully; check gasket seating and door alignment after installation

This inner door frame is the factory replacement trim piece that helps secure interior door components and restore a finished appearance. It replaces damaged or cracked inner door trim to keep the door assembly stable and looking like new. What it does:

• Replaces a cracked, warped or broken inner door frame or trim piece
• Provides mounting/support for interior door components and shelves
• Restores a proper fit and factory appearance to the door interior
• Helps prevent further damage to door-mounted parts from a loose or broken frame

• One (1) inner door frame

• Disconnect power to the appliance before starting any repair
• Remove door shelves, gasket and any clips or screws to access the inner frame
• Handle parts carefully to avoid scratching the finish; retain all fasteners for reassembly

This replacement handle provides a sturdy grip for opening and closing your appliance door, restoring safe and convenient access. It matches OEM form and mounting points for a factory-fit feel. What it does:

• Replaces a damaged, cracked or loose door handle to restore normal operation and grip
• Secures to the door using factory mounting points to maintain original alignment
• Prevents further wear to door trim by restoring proper handle function
• Fits the specific OEM handle location to keep the original appearance

• One replacement handle

• Disconnect power to the appliance before beginning any repair to prevent injury
• Follow the appliance's service manual for door removal or partial disassembly if required
• Use appropriate hand tools; avoid overtightening fasteners to prevent damage
• If mounting clips or screws are missing or damaged, replace them with OEM-specified hardware

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Door Strike is an OEM part for LG washing machines. This part ensures that the door closes securely and the washer can operate safely. 

Causes of a bad door strike can include regular wear and tear from frequent use, impact or mishandling that leads to bending or breaking, or issues with the door alignment that cause undue stress on the strike. 

Symptoms of a bad Door Strike include:

• The door not latching properly
• The washer not starting or stopping mid-cycle due to door issues
• Leaks around the door during operation
• Visible damage or wear to the strike

This OEM LG part is also compatible with some Kenmore models.

Restore stable, level support with this replacement leg assembly. The adjustable foot steadies the unit on uneven floors, reducing vibration and rattling while allowing precise leveling for proper alignment and smooth, reliable operation.

• Provides adjustable support at the base of the unit
• Helps keep the appliance level on uneven or sloped floors
• Reduces wobble, vibration, and rattling noises
• Promotes proper door alignment and closure
• Replaces stripped, cracked, or missing leg assemblies

• Disconnect power; shut off water supply if applicable
• Carefully tilt and support the appliance to access the leg area
• Unthread the old leg; hand-thread the new assembly to avoid cross-threading, then fine-adjust with a wrench
• Level front-to-back and side-to-side; confirm stability before use

This outer housing case protects internal components and provides the appliance's external structure for reliable operation and a finished appearance. It helps keep parts aligned and shields electronics and mechanisms from debris and damage. What it does:

• Covers and protects internal components from dust and accidental contact
• Keeps internal modules properly positioned and supported
• Restores the appliance's exterior appearance and structural integrity
• Stops rattles or vibrations caused by a damaged or missing panel

• One outer housing case

• Disconnect power and water before beginning any repair
• Handle panel edges carefully to avoid cuts or cosmetic damage
• Use manufacturer-recommended fasteners; do not overtighten screws

This part may be black or gray in color.

This Cover Cap replaces a missing or damaged cosmetic cap to restore a clean finished appearance and help protect underlying fasteners and openings from dirt. It's a simple, low-cost fix for visible damage. What it does:

• Covers and conceals exposed screw heads, fastener holes, or trim openings for a finished look
• Helps limit dirt and debris accumulation in small openings
• Useful when the original cap is cracked, broken, or lost
• Restores appliance aesthetics without replacing larger panels

• High-level: typically snaps or presses into place; may require removing the adjacent trim or panel for access
• Disconnect power and water (if applicable) before removing panels to avoid electrical or water hazards
• Use gentle prying with a plastic trim tool to avoid scratching surrounding surfaces

This water level pressure switch senses the washer tub's water level and signals the control to start or stop filling. It restores accurate fill detection for proper wash cycles and helps prevent overfilling or improper operation. What it does:

• Detects water level via a vacuum hose and tells the control board when to stop filling
• Helps prevent overfill, underfill, and related cycle interruptions
• Can resolve symptoms like washer not filling, overfilling, or stopping mid-cycle
• Works as the sensing interface between the tub and the control system

• One water level pressure switch assembly

• Disconnect power and shut off water supply before replacing the part
• Note the vacuum hose routing and electrical connector locations before removal
• Handle the small vacuum hose and plastic fittings gently to avoid damage or air leaks

The Power Cord Assembly is an OEM replacement part for LG front-loading washing machines. As the primary connection to household electricity, this cord safely delivers the required voltages to internal components.

Causes of a damaged or defective cord typically involve accidental cuts, abrasions or punctures accumulated over time. Repeated bending stresses during installations can prematurely crack insulation as well.

Symptoms of a problematic power cord include: 

• Inability to power "On" when plugged in  
• Tripped breakers or ground fault outlets
• Visible wire fraying or other signs of compromised integrity

This OEM assembly fits some Kenmore/Sears machines and protects against potential shock or fire hazards.

The Door Switch is an OEM part for LG washing machines. It is responsible for detecting whether the washer door is securely closed or open. The door switch ensures that the washer operates only when the door is properly closed and latched.

A bad washer door switch can occur due to wear and tear over time, electrical malfunctions, or physical damage. If the door switch fails, it can prevent the washer from starting or cause it to stop mid-cycle, resulting in inconvenience and disruption to your laundry routine.

Symptoms of a bad washer door switch include:

• Washer not starting or powering on.
• Washer not completing cycles or stopping abruptly.
• Inability to lock or unlock the washer door.

This OEM LG part can also be used on Kenmore/Sears appliances.

This protective cover shields internal components and wiring from dirt, moisture and accidental contact, helping keep the appliance safe and functioning properly. It's a small replacement panel that restores the appliance's factory protection. What it does:

• Covers and protects internal parts and wiring from debris and accidental impact
• Prevents loose components from rattling or shifting during operation
• Helps maintain proper spacing and alignment of nearby panels and clips
• Addresses symptoms like visible damage, missing cover, exposed wiring, or unusual noise from loose trim

• Disconnect power before starting any repair to avoid shock or injury
• Typically secures with clips or a few screws; use basic hand tools and take care not to strip fasteners
• Inspect mounting tabs and surrounding trim for damage; replace any broken clips before reassembly

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.