Parts for Lg DLEX5680V: Control Panel Parts

This display power control board assembly controls the appliance's front display and user interface, restoring display illumination and button responsiveness so you can set and monitor cycles or settings clearly. What it does:

• Provides power and control signals to the front display and touch/press buttons
• Manages display illumination and user-interface feedback
• Can resolve symptoms like a blank or flickering display, unresponsive controls, or incorrect display indications
• Works as a direct replacement for the failed display/control circuit in the affected control area

• Disconnect power to the appliance before starting any repair to avoid shock or damage.
• Handle the board by its edges and avoid touching components or connector pins to prevent static or contamination damage.
• Confirm connectors and orientation match before fastening; use existing mounting hardware unless replacement fasteners are provided.

This main PCB power control board assembly manages power distribution and control signals for the appliance, restoring proper electronic control and responsive operation when the original board fails. What it does

• Supplies and routes power to the appliance's control circuits and user interface
• Processes inputs from buttons/sensors to run cycles and functions
• Can resolve issues like blank displays, erratic cycling, or failure to start when board is defective

• One main PCB power control board assembly

• Disconnect all power before beginning service to avoid shock or damage
• Handle the board by its edges and avoid static discharge; use an anti-static wrist strap if available
• Verify connector orientation and secure all wiring harnesses; do not force connectors
• After installation, reconnect power and run a basic operation/test cycle

This knob assembly replaces a worn or broken control knob so you can reliably set and adjust appliance settings. It restores a secure, easy-to-turn interface for the appliance's control shaft. What it does:

• Fits onto the control shaft to allow manual selection of settings and temperatures.
• Replaces cracked, stripped, or loose knobs that no longer grip the control shaft.
• Helps resolve issues where the control won't turn smoothly or slips while changing settings.
• Restores tactile feedback for accurate user control.

• Disconnect power to the appliance before removing or installing the knob.
• Pull the old knob straight off the control shaft.
• Align the knob's internal splines with the control shaft and push until fully seated.
• If knob does not seat or control still slips, inspect shaft splines and replace damaged components as needed.

This upper plate is the replaceable trim/cover that fits inside the top of the microwave cavity to protect internal components and help direct airflow. Replacing a damaged plate restores proper coverage and reduces debris buildup. What it does

• Covers and protects internal microwave components at the top of the cavity
• Helps maintain proper airflow and part alignment inside the oven
• Prevents food and debris from contacting internal wiring and electronics
• Reduces rattling or vibrations caused by a warped or loose plate
• Visible cracks, warping, or burn marks are common signs it needs replacement

• One upper plate as pictured

• Disconnect power at the wall and allow the oven to fully power down before servicing
• Remove fasteners or clips holding the old plate, align tabs, then secure the new plate with the original hardware
• Do not operate the microwave with covers removed; complete the repair

This outer cabinet frame provides the structural front support and finished edge for the appliance, restoring proper fit and appearance. Replaces damaged, cracked, or warped frames to help align panels and cover internal components. What it does:

• Restores the appliance's front structural support and trim
• Covers and protects internal components from debris and tampering
• Helps correct panel alignment and reduces gaps or rattling
• Improves cosmetic appearance by replacing cracked or dented framing

• One outer cabinet frame/body

• Disconnect power and water before starting any repair
• Handle carefully — edges may be sharp and mounting tabs can be fragile
• Basic hand tools (screwdriver, nut driver) are typically required

This safety cover is an internal protective shield used inside the dryer to guard components and help maintain proper airflow. Replacing a cracked or missing cover helps keep wiring and moving parts enclosed for safer operation. What it does:

• Shields internal wiring and components from accidental contact
• Helps channel air and lint flow as designed
• Replaces a damaged, heat-warped, or missing cover
• Helps resolve rattling/vibration noises and visible gaps where the cover mounts

• Includes 1 safety cover

• Unplug the dryer; for gas models, shut off gas and allow the unit to cool
• Access the cover location per your model's service manual; remove panels as needed
• Position the cover correctly and secure using existing hardware/clips
• Do not operate the dryer with the cover removed or loose