Parts for Thermador C272US: C Control Panel And Plenum Parts

The touch control panel glass covers the electronic controls on the oven front and provides the interface for programming cooking functions. Replace when the glass is cracked, touch commands don't register, or the display is obscured or damaged.

Display mounting bracket for wall ovens and ranges. Secures the control panel display in position. Replace if bracket is cracked, broken, or missing.

This electronic circuit board manages all oven operations and is typically mounted behind the front control panel. Replace it if the oven won't start, displays error codes, or cooking functions operate incorrectly.

If your oven won't start or runs with the door open, this door interlock switch detects proper closure and latching. DIY repair in under an hour.

This part has been discontinued by the manufacturer and is no longer available.

This part has been discontinued by the manufacturer and is no longer available.

Oven won't heat or shuts off during use? This thermal fuse cuts power when temperature exceeds safe limits. Moderate DIY repair with multimeter testing.

This part has been discontinued by the manufacturer and is no longer available.

This replacement fan restores proper airflow inside your appliance, circulating air for cooling and overall performance. Replacing a worn or damaged fan helps keep temperatures in check and reduces noise from rubbing or imbalanced blades.

• Circulates air as designed to cool components and move heat/moisture where intended
• Common symptoms of a failing fan include loud scraping or rattling, weak or no airflow, wobble, or the fan not turning
• Heat buildup around the control area or repeated thermal shutdowns can point to a fan issue
• Physical cracks, broken fins, or warping indicate the fan should be replaced

• Disconnect power at the breaker; allow the unit to cool completely
• Access the fan per your model; remove panels/guards carefully and note orientation
• Transfer any retaining nut/clip or gasket from the original as required; seat the fan fully and secure
• Spin by hand to verify free movement; ensure no contact with shrouds before restoring power

This upper blower mounting bracket secures the blower/air assembly in place to maintain alignment and reduce movement. It replaces the worn or broken bracket that can allow the blower to shift or vibrate during operation. What it does:

• Secures the blower or air circulation assembly to the appliance chassis
• Keeps the blower aligned for proper air flow and part engagement
• Helps prevent vibration, rattling, or noise caused by a loose blower
• Supports proper fan clearance to avoid rubbing or intermittent contact

• Disconnect power to the appliance before beginning any repair
• Retain or reuse existing fasteners unless replacements are specified
• Basic hand tools are typically required; handle edges carefully

This is the upper plenum burner partition — a replacement panel that helps direct heat and airflow inside the cooktop/oven plenum for more consistent burner performance and reduced hotspots. What it does:

• Separates and channels hot gases and airflow in the upper plenum to maintain even heat distribution
• Helps reduce burner-to-burner interference that can cause uneven cooking
• Replaces damaged, warped, or corroded plenum partition that may rattle or allow heat loss
• Restores the plenum's intended internal airflow path for proper burner operation

• One upper plenum burner partition panel

• Disconnect power and shut off gas supply before beginning any service
• Handle metal edges carefully — wear gloves to avoid cuts
• Retain or reuse original fasteners/gaskets unless replacements are specified

Fix a loud humming or buzzing noise from your wall oven control panel. This low-voltage transformer powers the control board and related circuits.

Flexible conduit cable that protects electrical wiring in your oven. Replaces cracked, damaged, or worn conduit. Installs between junction box and unit.

A 1/2 in. 90° connector used to join the appliance water inlet to the household supply, restoring a secure right-angle connection and helping prevent kinks or strain at the hose junction. What it does:

• Creates a sealed right-angle connection between the appliance water inlet and supply line
• Restores proper water flow when the previous connector is damaged or leaking
• Reduces strain and hose kinking at the inlet fitting
• Commonly replaced to stop visible leaks or water drips at the connection

• Turn off the water supply and disconnect power to the appliance before installing
• Use appropriate thread sealant or tape where required by the appliance manufacturer
• Hand-start threads to avoid cross-threading; tighten with a wrench until snug — do not overtighten

This part has been discontinued by the manufacturer and is no longer available.

Fix a blank or flickering oven display with this display signal harness. Connects the control board to the display panel. Moderate DIY repair.

Communication signal wire harness for wall ovens and ranges. Connects control boards to transmit data signals. Replace if wires are frayed or damaged.

Wire harness that connects to your wall oven's door latch assembly. Replace if the harness is damaged, wires are frayed, or connectors are broken.

Wire harness for wall oven lower door latch assembly. Connects latch mechanism to control system. Replace if wires are damaged, frayed, or connectors broken.

Phillips pan head mounting screw for cooktops and ranges. Replace this zinc-coated fastener if lost, stripped, or corroded during appliance repair.