Parts for Ge CTS92DM2N1S5: Control Panel & Upper Door Parts

This handle spacer positions and supports the appliance door handle to maintain proper gap and alignment, helping the handle sit securely and function smoothly. Fits where the handle meets the door to prevent binding or rubbing. What it does:

• Provides an even gap between the handle and door for correct handle alignment
• Stabilizes the handle to reduce movement and rattling during use
• Prevents the handle from contacting the door surface and causing wear
• Helps restore proper handle feel when the original spacer is cracked or missing

• One handle spacer

• Disconnect power to the appliance or remove batteries where applicable before beginning work
• Remove the handle fasteners, position the spacer, then reinstall fasteners; do not overtighten
• Inspect mating surfaces for damage and replace any stripped screws or broken handle parts

This RJ45 mounting bracket secures an RJ45 network/communication jack to the appliance frame, restoring proper connector alignment and mechanical support. It's a simple replacement part for damaged or missing brackets. What it does:

• Holds the RJ45 jack firmly in place to prevent connector movement and intermittent connections
• Aligns the jack for easy cable insertion and secure mating
• Protects the connector and wiring from strain or damage during use
• Helps restore reliable network/communication port positioning after panel or bracket damage

• One RJ45 mounting bracket

• Unplug the appliance or disconnect power before servicing
• Remove the access panel or trim to reach the existing bracket; retain fasteners for reassembly
• Gently disconnect the jack/cable before removing the old bracket; avoid pulling on wires
• Hand-tighten or torque screws to manufacturer specifications; do not overtighten

A small replacement spring wiper that restores proper contact pressure and wiping action on the appliance component it services. Replaces a worn or broken wiper spring to help maintain consistent performance and reliable operation. What it does:

• Provides tension and a wiping contact surface where the original spring wiper has worn or failed
• Restores consistent electrical/contact or mechanical wiping action that can affect operation
• Commonly replaced when loose, bent, broken, or when intermittent contact is observed
• Helps prevent arcing, poor contact, or inconsistent component movement when functioning correctly

• One spring wiper

• Evaluate the surrounding components and match before installing; replace only the part(s) explicitly specified
• Use proper tools and avoid bending or overstretching the spring during installation
• Disconnect power to the appliance before accessing or replacing electrical/contact components

This slider assembly base supports and guides a refrigerator/freezer drawer so it opens and closes smoothly. It replaces worn or broken slider bases to restore proper drawer alignment and movement. What it does:

• Provides the base support for the drawer slide mechanism to ensure smooth opening and closing
• Replaces cracked, broken or worn plastic slider components that cause sticking or uneven travel
• Helps prevent the drawer from falling out or binding during use
• Works with the existing slide/rail hardware to maintain proper alignment

• Disconnect power or remove food and follow manufacturer safety instructions before working in the appliance
• Remove the drawer and any trim to access the slider area; installation typically involves snapping or fastening the slider into place
• Inspect mating slide/rail components and replace any damaged clips or screws for a secure fit

Upper window pack assembly that replaces a cracked or damaged refrigerator door window panel, restoring appearance and helping protect the components behind the outer window. What it does:

• Replaces the upper door window pack to restore a clear, finished exterior on the appliance door.
• Addresses visible damage symptoms such as cracked, scratched, cloudy or broken window panels.
• Protects internal door components from exposure to moisture and debris.
• Matches the OEM-style mounting points for a like-for-like replacement when used with the correct model parts.

• Disconnect power and remove food from the door area before starting any repair.
• Handle the window pack carefully; wear cut-resistant gloves and eye protection when removing broken or cracked pieces.
• Remove any trim or fasteners per the appliance's service instructions; retain mounting screws and gaskets as needed.
• Refer to the OEM service manual or diagram for model-specific removal and reassembly steps.

A single mounting screw used to secure panels and components on compatible GE appliances. This genuine-fit fastener keeps parts firmly attached so panels and assemblies stay aligned and function safely. What it does:

• Secures trim, panels, brackets, or small components in place
• Restores loose or rattling panels caused by missing or stripped screws
• Helps maintain proper alignment of service panels and assemblies
• Prevents vibration-related noise from unsecured parts

• Use the correct size screwdriver or bit to avoid stripping the head
• Hand-start threads, then tighten securely but avoid overtightening to prevent damage
• If working near electrical components, disconnect power before servicing
• If a screw was stripped or the mounting hole is damaged, replace with the correct fastener size

This silicon controlled rectifier (SCR) is an electronic switching component that controls current flow in appliance control circuits, helping regulate power to heaters, motors, or other loads for stable operation. What it does:

• Switches and regulates current in control boards and power circuits
• Can prevent power from reaching a heater, motor, or element when failed
• Helps protect downstream components by controlling surge/current flow

• Disconnect power to the appliance before servicing to avoid shock.
• Handle the SCR carefully to avoid electrostatic discharge (ESD) damage.
• May require board-level replacement or soldering skills.

This 1/4-20 hex nut secures threaded studs and bolts on appliances, providing a simple, reliable fastening point to keep panels, brackets, and components in place. Ideal for repairs where a worn or missing nut causes looseness or rattling. What it does:

• Fastens to 1/4-20 threads to lock panels, brackets, or assemblies together
• Restores secure mounting where a stripped, corroded, or missing nut causes movement
• Helps stop vibration-related noise by holding parts tightly
• Small hardware solution used in many appliance fastening applications

• One 1/4-20 hex nut

• Use the matching 1/4-20 bolt or stud; thread fit before tightening
• Hand-start the nut to avoid cross-threading, then tighten with the appropriate wrench
• Do not overtighten to prevent stripping threads or damaging components
• Disconnect power and follow appliance-specific safety instructions before working

The Set Screw is an OEM part for GE refrigerators. The set screw fits into the handle assembly, ensuring a tight and stable connection to the refrigerator door. This set screw is essential for preventing the door handle from becoming loose or coming off, which can affect the ease of opening and closing the refrigerator door. 

Causes of a malfunctioning Set Screw can vary. Normal wear and tear is a common issue, causing the screw to strip or loosen over time. Incorrect installation is another factor.  

Symptoms of a bad Set Screw include:

• A loose refrigerator door handle, which may wobble or detach partially from the door.
• Difficulty in opening or closing the refrigerator door due to a lack of secure grip.
• The need to frequently retighten the door handle.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.