Parts for Ge GTW720BPN1DG: Controls & Backsplash Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The GE Badge is an OEM part for GE washing machines. It is an emblem installed on the exterior of the washer that identifies the manufacturer and brand. Beyond aesthetics, the badge also demonstrates authenticity and quality assurance for the appliance.

Causes of a bad badge can include damage from impact or weathering over time, loss of adhesion to the outer casing, or fading/wear of printed graphics.  

Symptoms of a bad badge include:

• Missing or loose badge that is no longer securely attached
• Faded or illegible print that fails to display the brand
• Cracks or pieces breaking off the badge surface

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This left backsplash support secures the left side of a range or stove backsplash, keeping the backsplash aligned and stable for safe, reliable operation. It replaces a bent or broken support to restore proper fit and appearance. What it does:

• Holds and supports the left edge of the backsplash to prevent sagging or separation
• Restores proper alignment so control panels and trim sit flush
• Helps stop rattling or vibration caused by a damaged support
• Commonly replaced when the support is bent, cracked, or missing

• Install with the appliance unplugged and controls off; disconnect power at the breaker for electric ranges.
• Depending on model, you may need to remove the backsplash trim or rear panel to access mounting points.
• Use correct-size fasteners and verify secure attachment; avoid overtightening to prevent cracking.

This right-side backsplash support secures the range's backsplash to the cooktop, restoring proper alignment and stability so the backguard sits firmly and reduces wobble or gaps. Designed to fit the OEM mounting points. What it does

• Holds the right side of the backsplash in place so the backguard stays aligned with the cooktop
• Prevents the backsplash from leaning, rattling, or separating from the range
• Restores proper mounting after impact, wear, or missing/broken fasteners
• Works with the range's existing screws and mounting brackets to re-establish a solid fit

• One right-side backsplash support

• Disconnect power to the appliance before starting any repair
• Remove the backguard or access panel per manufacturer instructions to reach mounting area
• Use basic hand tools (screwdriver/socket) to remove and replace fasteners; keep original screws if reusable
• Watch for sharp sheet-metal edges and wear safety gloves and eye protection

The Selector Knob is an OEM part for GE washing machines. It allows users to directly choose specific wash settings like temperature, spin speed, and soil level from the control panel interface.

Symptoms of a bad selector knob include:

• Knob inadvertently moves between positions during washing   
• Settings do not stay firmly engaged and jump to different options
• Illegible or faded lettering obscuring chosen temperature/settings
• Difficult, grinding, or inconsistent movement-making selection challenging  

Causes can be repeated rotational use over cycles causing wear, or loose, corroded mounting points compromising secure fitting. 

This GE OEM replacement selector knob ensures reliable cycle programming. Compatible with some Hotpoint, RCA, and Kenmore models as well, it maintains convenient setting adjustment. 

This control board kit replaces the washer's user interface and main control electronics. It helps restore proper power-up, input response, and accurate cycle execution when the original boards fail.

• Interprets button/knob inputs and drives console indicators
• Manages cycle logic and timing for wash, drain, and spin
• Controls valves, motor, pump, and door/lid lock per selections
• Typical symptoms: dead or blank console, won't start, unresponsive buttons, cycles that won't advance, control-related error codes

• Disconnect power before servicing; boards are sensitive to static—use ESD protection
• Note wire locations and connector orientation before removal
• Secure boards and fully seat connectors to avoid intermittent issues
• Complete any programming/option selection steps and run a test cycle

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This jumper harness is an OEM-style electrical connector harness that restores reliable connector-to-connector wiring between components. It replaces a worn or damaged harness to help re-establish proper electrical connections and operation. What it does:

• Links two or more electrical connectors to complete a circuit between controls and components.
• Replaces damaged, frayed, or corroded wires that can cause intermittent operation or loss of power.
• Commonly used when console, control board, or component-to-component connections fail or show error symptoms.
• Helps eliminate open circuits and poor connections that trigger faults or prevent operation.

• One jumper harness as shown

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Match connector shapes and wire colors before connecting; do not force connectors together.
• Route and secure the harness away from moving parts and heat sources; use existing clips or ties.

This inverter jumper harness connects the refrigerator's inverter board to the main control, restoring the electrical pathway needed for proper inverter operation. Replaces a damaged or worn harness to help resolve intermittent power or communication issues. What it does:

• Provides the electrical connection between the inverter module and the main control board
• Transmits power and signal needed for inverter-driven compressor operation
• Commonly used when a frayed or damaged harness causes intermittent cooling, error codes, or compressor not running
• Helps eliminate poor connections that can trigger fault codes or erratic system behavior

• Disconnect power to the appliance before starting any repair
• Handle connectors gently; align pins and secure clips to avoid damage
• Route the harness away from moving parts, sharp edges, and heat sources

The Inverter Board is an OEM part for GE washers. This board is part of the washer's motor control system, responsible for converting and regulating the power supply to the motor. The inverter board controls the speed and direction of the motor, enabling various wash cycles and settings.

A bad inverter board can occur due to electrical issues, component failure, or power surges. If you notice symptoms such as the motor not running or running at incorrect speeds, error codes displaying on the control panel, or the washer not completing cycles, it may be time to replace the inverter board.

Symptoms of a bad inverter board include:

• Motor not running or running at incorrect speeds
• Error codes displaying on the control panel
• Washer not completing cycles

Restore operation of your GE washer by replacing the faulty inverter board with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This main wiring harness routes power and signals between the control and service components, restoring reliable electrical connections where the factory harness is damaged or worn. Designed as a direct replacement to match the original wiring layout. What it does:

• Provides the main electrical connection between control modules and appliance components
• Carries power and control signals along factory routing to ensure proper operation
• Replaces damaged, burnt, or frayed wiring that can cause intermittent faults
• Common symptom: components have no power or sporadic operation after harness damage
• Helps resolve control errors caused by broken or shorted wires

• Disconnect power to the appliance before starting any repair
• Compare new harness to the original to confirm connector types and routing before installation
• Route and secure the harness following OEM clips and ties; avoid contact with moving parts or hot surfaces

8-18 hi/lo 5/8

This replacement screw fastens appliance panels, brackets, and trim. The 8-18 thread with 1-3/4-inch length provides reliable bite in sheet metal or plastic, restoring a secure fit when an original fastener is missing or damaged.

• Secures panels, brackets, and trim to the cabinet or frame
• Replaces lost, stripped, or corroded fasteners
• Helps address loose or rattling panels, minor gaps, or misalignment
• Appropriate for sheet-metal applications that require ~1-3/4-inch reach

• Disconnect power before servicing; wear cut-resistant gloves
• Support the panel or part being fastened and use the correct driver for the screw head
• Start threads by hand to avoid cross-threading; do not overtighten into plastic or thin metal
• Repair or replace the anchor before installing

The Power Cord is an OEM part for GE washers. It provides the crucial connection, transmitting electrical current from the wall outlet to power the washer components and functions. Ensuring the integrity of this cord is vital for safe and reliable operation. 

Symptoms of a bad power cord include:

• Frayed, cracked, or exposed copper wiring 
• Loose connections at either end
• Buzzing, sparks, or shocks felt around the cord
• The washer fails to power on as expected

Causes can be normal flexing wear over thousands of cycles, damage from pinching, rodents, or excess tension on the cord. 

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.