Parts for Ge GTW810SPJ0MC: Controls & Backsplash Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This replacement badge is the small logo emblem that mounts to the appliance exterior to restore original appearance and branding. It provides a clean, professional look when the original emblem is missing, faded, or damaged. What it does:

• Replaces a missing, cracked, or faded exterior logo emblem
• Restores factory appearance on doors, panels, or control bezels
• Helps identify the appliance and maintain resale value
• Cosmetic-only part; does not affect appliance operation

• Surface-mount installation; may use adhesive or snap-fit depending on model—inspect original attachment method before installing
• Clean and dry mounting surface thoroughly for best adhesion
• Handle carefully to avoid scratching finished surfaces

8-18 hi/lo 5/8

This foam lightguide assembly directs interior dispenser lighting to the dispensing area for clearer visibility. It replaces a worn, cracked, or deformed light guide so the dispenser light reaches the cup and chute area. What it does:

• Channels and focuses the dispenser/recess light so the illuminated area is visible where you fill cups
• Restores proper light path when the original foam guide is crushed, split, or missing
• Helps eliminate dark spots around the dispenser opening caused by damaged or misaligned guides
• Fits into the dispenser/door trim area and works with the existing light source and housing

• One foam lightguide assembly

• Disconnect power to the appliance before starting any work
• Handle the foam gently to avoid tearing; align tabs or slots per the dispenser trim
• Removal typically requires opening or removing the dispenser bezel or door trim
• If light still doesn't reach the area after installation, check the lamp/LED and electrical connections

This power line filter sits between household AC and the washer's internal wiring to reduce electrical interference and help stabilize control operation. Replacing a failed filter may restore power and prevent nuisance breaker or GFCI trips.

• Filters incoming AC power to reduce electromagnetic interference reaching the control and motor circuits
• Helps prevent interference-related issues like erratic controls or random resets
• Failure may present as no power/blank display, intermittent power loss, or tripping a breaker/GFCI
• Visual clues of failure can include scorching, swelling, or a cracked housing

• Unplug the washer or switch off the circuit breaker before servicing; allow a few minutes for internal components to discharge
• Access the filter location (often near the control area or rear panel) per your model's service information
• Note wire locations (LINE, LOAD, and GROUND) and move one lead at a time to avoid miswiring
• Mount securely and ensure the ground connection to the cabinet is tight for proper operation

This main control and firmware assembly manages the appliance's electronic operations and user-interface logic, restoring correct cycle selection and timed functions when the original control fails. It replaces a failed control module to return normal operation. What it does:

• Runs the appliance's programmed cycles and timing via embedded firmware
• Interprets user inputs and controls start/stop, cycle selection, and display feedback
• Can resolve symptoms like unresponsive controls, error codes, or cycles that won't start or complete
• Replaces a damaged or non-functional control board causing intermittent or no power to functions

• One control and firmware assembly

• Disconnect all power (unplug or shut off breaker) before accessing the control area
• Handle the assembly carefully; avoid static discharge and contact with circuit components
• Verify your model number matches this part before ordering
• If firmware configuration or calibration is required, consider dealer service

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This rear cover label assembly replaces a worn, damaged, or missing information label on the appliance rear cover to restore factory identification and visible service/safety markings for easier identification during maintenance. What it does:

• Restores factory-applied identification, serial/manufacturer markings and printed information on the appliance rear cover.
• Provides visible safety warnings and service information printed on the original label.
• Helps technicians and owners identify the appliance during troubleshooting or part replacement.
• Improves readability of faded or illegible rear-cover information.

• Disconnect power and unplug the appliance before accessing the rear cover.
• Remove any screws or panels needed to access the label area; follow OEM access procedures.
• Clean and dry the mounting surface before applying the new label to ensure adhesion and proper placement.
• Align the label carefully and press firmly; do not stretch, trim, or alter the label.

The User Interface Harness is an OEM part for GE washing machines. It connects control board electronics to the machine interface like buttons, lights and displays.

Causes of failure may include damaged or severed wiring from vibration fatigue or sharp edges inside the appliance over many use cycles. Corroded contacts can also impair signal transmission.

Symptoms are:

• Unresponsive buttons and displays
• Inability to select desired cycles or options
• Flickering or malfunctioning status lights
• Control panel errors or code messages

This OEM GE  part is also compatible with Hotpoint, RCA, and some Kenmore models.

8-18 hi/lo 5/8

This tub light assembly provides interior illumination so you can see inside the washer tub for loading, unloading, and inspecting clothes. It replaces a worn, cracked, or non-working tub light to restore visibility. What it does:

• Houses the lamp that lights the interior of the washer tub for easier loading and unloading
• Replaces a burned-out or flickering tub light
• Helps you spot small items, stains, or foreign objects inside the drum
• Restores safe, reliable interior lighting when the original lens or lamp fails

• One tub light lamp assembly

• Disconnect power to the appliance before beginning any service
• Access typically requires removing the console or tub trim
• Handle lens and bulb carefully to avoid damage; use proper replacement bulb if separate

The Harness Motor is an OEM part for GE washing machines. As a key sub-harness, it delivers critical power signals from the control system to operate the drive motor. Proper communication is essential for the motor to run cycles efficiently.

Symptoms of a failed harness motor include:

• Inability to start or complete agitation or spin functions  
• Drive motor runs intermittently or at improper speeds
• Odd noises or vibrations emanating from the motor 

Potential causes relate to cracking, pinching, or severed wires from repeated door openings and closures over many cycles of use. Corrosion inside the casing from moisture exposure can also disrupt conductivity.

This genuine GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. Installing an OEM harness motor ensures dependable motor operation via solid electrical pathways to cycling systems reliably wash after wash.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.