Parts for Ge PFWS4605L0MG: 01 - Controls & Dispenser Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Fix a washer that won't start, won't advance cycles, or shows error codes with a new control board assembly. This repair typically takes 30-60 minutes.

Replacement mounting screw for washers. Secures internal components and panels. Order a new screw if yours is stripped, missing, or damaged.

Replacement mounting screw for washer pedestals. Secures pedestal to washer base. Order if original screw is stripped, missing, or damaged.

Replacement self-tapping screw for securing panels, brackets, and small components on washers. Needed when original fasteners are missing or damaged.

A flexible hose that delivers water to the wash basket during various cycle phases for cleaning clothes. Replace if you notice weak water pressure, leaks during operation, or if the washer displays fill-related error codes.

Secures multiple small pipes to reduce vibration and prevent chafing. Replace if cracked, loose, or causing rattling. Confirm fit with your model.

This siphon pipe connects to the washer's drain system and helps direct water out of the tub during the drain cycle. It uses a siphon action to efficiently remove wash and rinse water from the machine. Replace this part if the washer is not draining properly, water is leaking from the drain hose area, or you notice water remaining in the tub after a cycle completes.

Fix detergent not dispensing or insert popping out. This liquid detergent dispenser insert fits inside your washer drawer for proper dosing. Quick fix.

Replace your washer's softener and bleach dispenser cover if it's cracked, broken, or missing. Fits on top of the dispenser drawer assembly.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Fix detergent not dispensing or a cracked dispenser drawer. This washer dispenser drawer assembly restores proper soap, bleach, and softener flow.

These flexible hoses connect your washing machine to the hot and cold water supply valves, allowing water to fill the washer tub during cycles. Replace them if you notice water leaking at the connections, reduced water flow, or visible cracking, bulging, or wear on the hose material.

This diverter valve directs wash water inside the machine, switching flow between internal paths during wash and drain/recirculation steps. Replacing a failed diverter restores proper water routing so cycles advance and complete as designed.

• Redirects water between the drain and recirculation/spray paths as commanded by the control
• Ensures correct water flow for wash, rinse, and drain steps
• A sticking or failed diverter can cause slow/no drain or no recirculation/spray
• May lead to cycle pauses/errors, unusual clicking/buzzing from the valve area, or leaks at the valve body/ports

• Unplug the washer and turn off water supply; expect residual water in hoses
• Access location varies by model; typically mounted along the pump/hoses under the cabinet
• Move hoses/clamps and the electrical connector one at a time; match port orientation
• After installation, run a rinse/drain test and check all connections for leaks

Diverter indicator for washers. Indicates water flow direction during wash cycles. Replace if cracked, broken, or no longer functioning properly.

Diverter lever plate for washers. This internal component controls water flow direction. Replace if cracked, broken, or worn to restore proper operation.

Dispenser inlet nozzle for washers. Connects to the detergent dispenser housing. Replace if cracked, clogged, or leaking during wash cycles.

Secures the detergent dispenser in your washer. Replace if the dispenser is loose, leaking, or not staying in place. Verify fit with your model number.

Fix a washer with no display, blank screen, or unresponsive controls. This display control board restores electronic operation. Moderate DIY repair.

Self-tapping screw for securing washer components and panels. Replace worn, stripped, or missing screws during repairs or reassembly of your machine.

This rubber gasket creates a watertight seal around water inlet connections in your washing machine. It prevents leaks and ensures proper water pressure for filling the tub during wash cycles. Replace this gasket if you notice water dripping from hose connections or if the washer takes too long to fill.

This gasket nozzle washer is a small rubber seal that fits at a spray/nozzle connection to help prevent leaks and ensure proper water flow. Replacing a worn gasket restores a secure seal and reduces dripping or pooling. What it does:

• Seals the connection at a spray nozzle or outlet to help stop leaks
• Maintains correct water flow through the nozzle for effective spraying
• Commonly replaces hardened, cracked, or flattened gaskets that allow dripping
• Helps eliminate minor water pooling or visible leaks near the nozzle area

• Turn off power and water supply to the appliance before servicing
• Remove the nozzle or fitting per the manufacturer's instructions; replace the old gasket with the new washer, ensuring it seats evenly
• Inspect mating surfaces for debris or damage before reinstalling

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.