Parts for Ge WPDH8910K1MV: 01 - Controls & Dispenser Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This is a replacement self-tapping screw used to secure panels, brackets and small components on compatible appliances. It provides a direct-fit fastener for repairs where the original ST4 x 25 mm screw is missing or damaged. What it does

• Fastens trim, access panels, brackets and internal components that use an ST4 x 25 mm self-tapping fastener
• Restores proper fit and reduces rattles or loose parts caused by stripped or missing screws
• Matches the OEM thread and length for a secure hold in sheet metal and plastic mounting points
• Useful for routine appliance repairs and refurbishments

• Use the correct size screwdriver or bit to avoid stripping the head
• Start threads slowly and avoid over-torquing to prevent stripping or cracking mounting material
• Ensure the appliance is unplugged or power is disconnected before servicing
• Keep removed hardware organized to verify correct replacement locations

This cluster button assembly replaces a worn or unresponsive set of control buttons on the microwave control panel, restoring reliable touch input and clear button feedback for normal operation. What it does:

• Replaces the grouped button/keypad area used to select microwave functions and power levels
• Restores tactile response and electrical contact for buttons that are sticking, unresponsive, or intermittent
• Helps resolve symptoms like buttons that don't register, multiple presses required, or inconsistent control input
• Works with the existing control board and overlay when compatible

• Disconnect power at the breaker or unplug the appliance before starting any work
• Access typically requires removing the outer control panel or door trim—handle panels carefully to avoid damage
• Use appropriate tools and keep track of screws and connectors; do not force connectors when unplugging

This 3-way pipe clamp secures multiple small pipes or lines to the appliance chassis to reduce vibration and keep plumbing lines organized and clear of heat or moving parts. It helps prevent chafing and rattling for a quieter, safer appliance. What it does:

• Holds up to three small-diameter pipes or tubes in a single clipped location to prevent movement
• Keeps water, drain or refrigerant lines routed away from hot or moving components
• Reduces vibration and rattle noises caused by loose tubing
• Helps prevent abrasion and wear that can lead to leaks or line damage

• Disconnect power and shut off water supply before beginning any work
• Access may require removing panels or covers; use appropriate hand tools
• Position lines fully into the clamp before snapping or fastening; avoid pinching or kinking tubing
• Do not overtighten fasteners; secure clamp snugly to prevent movement without stressing the lines

This siphon pipe routes water between the dispenser/ice maker and the refrigerator's water system to help maintain proper flow and prevent back-siphoning. It replaces a worn or damaged tube to restore reliable water delivery. What it does

• Directs water from the fridge water line to the ice maker/dispenser assembly.
• Helps prevent backflow or siphoning that can contaminate the water line.
• Commonly replaced when cracked, split, clogged, or leaking.
• Needed if ice maker won't fill, water pools under the fridge, or you notice water leaks.

• One siphon pipe

• Disconnect power to the appliance and shut off the water supply before beginning work.
• Inspect adjoining fittings and seals; replace any damaged gaskets or clamps for a secure, leak-free connection.
• Reconnect water and power, then run a fill/test cycle and check carefully for leaks.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Liquid Detergent Insert is an OEM part for GE washing machines. It is a small but important compartment that holds and dispenses precisely dosed amounts of liquid detergent during cycles. Located inside the detergent dispenser drawer, the liquid insert helps ensure the correct concentration of detergent is released. 

Causes of a bad liquid detergent insert can include cracked or broken plastic from repeated use, hardened plastic that no longer flexes properly to release detergent or damage to dispenser shutter mechanisms that control flow.

Symptoms of a bad liquid detergent insert include:

• Improper or uneven dispensing of detergent into the wash  
• Over or under-sudsing due to too much or too little detergent
• Residual detergent left in the insert compartment
• Reduced cleaning ability due to incorrect dosing

This genuine GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This drawer dispenser assembly replaces a damaged or worn dispenser drawer in the refrigerator door, restoring proper dispensing and a clean appearance. It fits into the dispenser housing to hold and route water/ice dispensing components. What it does:

• Replaces a cracked, warped, or broken dispenser drawer that can impede dispensing or leak
• Restores proper alignment so the dispenser flap and nozzles operate smoothly
• Helps stop visible leaks or drips coming from the drawer area
• Improves appearance where the drawer is scratched, discolored, or damaged

• Disconnect power to the appliance before beginning work to reduce shock risk
• Remove the old drawer by sliding it out and releasing any retaining clips or screws as required
• Inspect surrounding seals and retainers for damage; replace if necessary
• Use common hand tools

This diverter valve directs wash water inside the machine, switching flow between internal paths during wash and drain/recirculation steps. Replacing a failed diverter restores proper water routing so cycles advance and complete as designed.

• Redirects water between the drain and recirculation/spray paths as commanded by the control
• Ensures correct water flow for wash, rinse, and drain steps
• A sticking or failed diverter can cause slow/no drain or no recirculation/spray
• May lead to cycle pauses/errors, unusual clicking/buzzing from the valve area, or leaks at the valve body/ports

• Unplug the washer and turn off water supply; expect residual water in hoses
• Access location varies by model; typically mounted along the pump/hoses under the cabinet
• Move hoses/clamps and the electrical connector one at a time; match port orientation
• After installation, run a rinse/drain test and check all connections for leaks

This inlet pipe clamp secures the refrigerator water inlet line to the cabinet or valve, preventing movement and wear. Replaces a worn or broken clamp to help stop chafing and reduce the chance of leaks. What it does:

• Holds the water inlet pipe or tube firmly in place to prevent rubbing and stress at connections
• Helps maintain a steady water line position for proper water/ice dispensing
• Prevents pipe vibration or movement that can lead to leaks or line damage
• Commonly replaced when the original clamp is cracked, loose, or missing

• One inlet pipe clamp

• Turn off water supply and unplug the appliance before starting work
• Access may require removing a small panel or the toe grille depending on model
• Remove the old clamp and snap or fasten the new clamp in the same location; use appropriate fastener if required
• Inspect tubing and connections for damage while replacing the clamp

This gasket nozzle washer is a small rubber seal that fits at a spray/nozzle connection to help prevent leaks and ensure proper water flow. Replacing a worn gasket restores a secure seal and reduces dripping or pooling. What it does:

• Seals the connection at a spray nozzle or outlet to help stop leaks
• Maintains correct water flow through the nozzle for effective spraying
• Commonly replaces hardened, cracked, or flattened gaskets that allow dripping
• Helps eliminate minor water pooling or visible leaks near the nozzle area

• Turn off power and water supply to the appliance before servicing
• Remove the nozzle or fitting per the manufacturer's instructions; replace the old gasket with the new washer, ensuring it seats evenly
• Inspect mating surfaces for debris or damage before reinstalling

This stacking kit secures a compatible dryer to a matching washer to create a safe, space-saving stacked laundry configuration. It helps stabilize the dryer and reduces movement during use for a more reliable setup. What it does:

• Provides brackets and mounting hardware to fasten the dryer to the washer
• Helps prevent the dryer from shifting or tipping when the washer is running
• Improves overall stability of stacked laundry appliances during normal operation
• Reduces vibration-related movement that can cause noise or misalignment

• Disconnect power to both appliances before installing and follow all manufacturer instructions
• Use only on compatible washer/dryer pairs
• Tighten hardware securely but avoid overtightening; follow torque guidance in OEM instructions

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.