Parts for Ge GFWN1600J0WW: Controls & Dispenser Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This replacement UI board restores the front control panel's buttons and display so you can set and monitor cycles, temps, and timers. It provides the user-facing controls that communicate with the appliance's main control. What it does:

• Registers button presses and touch inputs from the control panel
• Sends user commands to the main electronic control for cycle and temperature selection
• Displays status, error codes, and timer information
• Commonly replaces a faulty panel causing unresponsive buttons, blank or garbled display, or intermittent control operation

• Power off and unplug the appliance (or turn off breaker) before accessing the control panel
• Remove only the fasteners and trim required to reach the control assembly; handle the board by its edges to avoid damage
• Reconnect ribbon cables and connectors fully and verify proper seating before reassembly
• If the problem persists after replacement, test related wiring and the main control for related faults

This is a replacement self-tapping screw used to secure panels, brackets and small components on compatible appliances. It provides a direct-fit fastener for repairs where the original ST4 x 25 mm screw is missing or damaged. What it does

• Fastens trim, access panels, brackets and internal components that use an ST4 x 25 mm self-tapping fastener
• Restores proper fit and reduces rattles or loose parts caused by stripped or missing screws
• Matches the OEM thread and length for a secure hold in sheet metal and plastic mounting points
• Useful for routine appliance repairs and refurbishments

• Use the correct size screwdriver or bit to avoid stripping the head
• Start threads slowly and avoid over-torquing to prevent stripping or cracking mounting material
• Ensure the appliance is unplugged or power is disconnected before servicing
• Keep removed hardware organized to verify correct replacement locations

The Knob is an OEM part for GE dryers. This component allows you to select various dryer settings and cycles by turning the control mechanism. It ensures that users can easily adjust and operate the dryer according to their laundry needs.

Causes of a bad knob can include wear and tear from frequent use, accidental damage from dropping or mishandling, or internal cracking and splitting that compromise its functionality.

Symptoms of a bad Knob include:

• Knob not turning or slipping
• Difficulty selecting dryer settings
• The knob becoming loose or falling off
• The dryer not responding to setting changes

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This inlet pipe clamp secures the refrigerator water inlet line to the cabinet or valve, preventing movement and wear. Replaces a worn or broken clamp to help stop chafing and reduce the chance of leaks. What it does:

• Holds the water inlet pipe or tube firmly in place to prevent rubbing and stress at connections
• Helps maintain a steady water line position for proper water/ice dispensing
• Prevents pipe vibration or movement that can lead to leaks or line damage
• Commonly replaced when the original clamp is cracked, loose, or missing

• One inlet pipe clamp

• Turn off water supply and unplug the appliance before starting work
• Access may require removing a small panel or the toe grille depending on model
• Remove the old clamp and snap or fasten the new clamp in the same location; use appropriate fastener if required
• Inspect tubing and connections for damage while replacing the clamp

This siphon pipe is a washer drain component that forms part of the air-break assembly. It helps prevent unintended siphoning and backflow so the tub drains correctly without pulling water back in or continuously draining. What it does:

• Provides the pipe section of the washer's siphon break/air gap
• Maintains airflow to stop siphoning and backflow during drain and spin
• Supports consistent, complete draining
• Typical failure signs: leaks near the siphon break, cracking, or water draining back into the tub

• Includes one siphon pipe

• Disconnect power and turn off water before servicing
• Expect some residual water; have towels or a pan ready
• Note hose routing; transfer any clamps/fittings from the old pipe and seat connections fully
• After reassembly, run a brief fill/drain to check for leaks and proper draining

This softener bleach cover is the replacement dispenser cap that seals the laundry softener/bleach opening and helps prevent spills and contamination. It restores a clean, controlled dispensing area for softener and bleach. What it does:

• Covers and seals the softener/bleach dispenser to prevent leaks and accidental spills
• Helps keep the dispenser area clean and reduces residue buildup
• Restores proper fit and alignment of the dispenser opening
• Commonly replaced when cracked, warped, missing, or failing to seat properly

• One softener bleach cover

• Disconnect power to the appliance before servicing if access requires reaching inside the cabinet
• Remove any remaining product from the dispenser and clean area before installing
• Typically snaps or fits into place—avoid forcing or prying to prevent damage

This genuine replacement drawer restores a refrigerator/freezer storage bin for holding food and packaged items, helping keep contents organized and accessible. Designed to fit the original slide tracks and contours for a proper fit. What it does:

• Replaces a cracked, warped, or missing storage drawer so food stays contained and organized
• Restores smooth sliding and proper alignment on the drawer tracks
• Prevents spills and helps maintain even storage space inside the compartment
• Works with the refrigerator's existing rails and separators when undamaged

• Recommended for experienced DIYers; remove all contents and support the drawer during removal to avoid damage
• Inspect rails and mounting hardware; replace any broken brackets for reliable operation
• Disconnect power only if required by your model when accessing interior components; follow safety precautions

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This water inlet pipe routes water from the refrigerator's supply to the dispenser and ice-making system, helping restore proper water flow and stop leaks at the inlet tubing. Durable molded tube designed to match factory fit. What it does:

• Carries water from the household supply to the fridge's dispenser and ice maker
• Replaces cracked, pinched, or corroded inlet tubing that can cause leaks
• Restores water flow when a damaged inlet pipe prevents dispensing or ice production
• Matches OEM shape to align with mounting points and fittings

• Turn off and disconnect power to the appliance before servicing.
• Shut off the water supply and drain remaining water from the line before removing the old pipe.
• Inspect and replace any worn seals, clips, or fittings; tighten connections to OEM torque specifications.

Small self-tapping screw used to secure appliance panels and internal components. Replaces worn or missing fasteners to restore proper fit and alignment for covers, brackets, and trim pieces. What it does

• Secures sheet-metal panels, brackets or trim to the appliance chassis
• Replaces stripped, corroded or missing screws that allow rattling or loose parts
• Helps restore proper panel alignment and prevents vibration noise
• Works where a self-tapping thread is required in thin metal or plastic mating parts

• Power off and unplug the appliance before servicing
• Use the correct screwdriver bit to avoid cam-out and head damage
• Start threads straight and drive carefully—do not overtighten to avoid stripping
• Replace like-for-like; match screw length and thread type to the original

This genuine replacement screw secures panels and components on compatible appliances to restore proper fit and reduce vibration or rattling. Use when missing, stripped, or loose fasteners prevent parts from staying in place. What it does

• Fastens trim, panels, or mounting brackets to maintain component alignment
• Restores secure attachment when original screws are missing or damaged
• Helps eliminate noise and vibration caused by loose parts
• Matches the OEM thread profile and length for proper fit

• Use the correct screwdriver or bit to avoid cam-out and damaged heads
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Keep spare screws and small parts away from children and pets
• If threads are damaged, replace mating fastener or insert rather than forcing this screw

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.