Parts for Ge GFWS1705H0DG: Controls & Dispenser Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

The user interface board is the electronic circuit board behind your appliance's control panel that processes button presses and communicates your selections to the main control system. It acts as the bridge between the physical controls and the appliance's operating functions. Replace this board if buttons don't respond, the appliance won't start, or only some controls are working.

Replacement mounting screw for washers. Secures internal components and panels. Order a new screw if yours is stripped, missing, or damaged.

Replacement mounting screw for washer pedestals. Secures pedestal to washer base. Order if original screw is stripped, missing, or damaged.

Front top mounting bracket for washers. Secures the top panel to the cabinet frame. Replace if cracked, bent, or broken to restore proper alignment.

Replacement self-tapping screw for securing panels, brackets, and small components on washers. Needed when original fasteners are missing or damaged.

This control knob attaches to the cycle selector or timer shaft on your dryer's control panel and allows you to choose drying cycles and settings. It is typically made of plastic and snaps or pushes onto the control shaft. Replace this knob if it is cracked, broken, or no longer grips the shaft properly, making it difficult to select or start a drying cycle.

Fix washer water flow issues with this 3-way pipe fitting. Routes water between three lines to restore proper water distribution in your washer.

Secures the water inlet line to prevent movement and wear. Replace when worn or broken to stop chafing and reduce leak risk. Verify fit with your model.

This siphon pipe connects to the washer's drain system and helps direct water out of the tub during the drain cycle. It uses a siphon action to efficiently remove wash and rinse water from the machine. Replace this part if the washer is not draining properly, water is leaking from the drain hose area, or you notice water remaining in the tub after a cycle completes.

Fix detergent not dispensing or insert popping out. This liquid detergent dispenser insert fits inside your washer drawer for proper dosing. Quick fix.

Replace your washer's softener and bleach dispenser cover if it's cracked, broken, or missing. Fits on top of the dispenser drawer assembly.

Protective cover for your washer's wire harness. Replaces cracked, broken, or missing covers. Shields internal wiring from moisture and damage.

Fix detergent not dispensing or a cracked dispenser drawer. This washer dispenser drawer assembly restores proper soap, bleach, and softener flow.

These flexible hoses connect your washing machine to the hot and cold water supply valves, allowing water to fill the washer tub during cycles. Replace them if you notice water leaking at the connections, reduced water flow, or visible cracking, bulging, or wear on the hose material.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This diverter valve directs wash water inside the machine, switching flow between internal paths during wash and drain/recirculation steps. Replacing a failed diverter restores proper water routing so cycles advance and complete as designed.

• Redirects water between the drain and recirculation/spray paths as commanded by the control
• Ensures correct water flow for wash, rinse, and drain steps
• A sticking or failed diverter can cause slow/no drain or no recirculation/spray
• May lead to cycle pauses/errors, unusual clicking/buzzing from the valve area, or leaks at the valve body/ports

• Unplug the washer and turn off water supply; expect residual water in hoses
• Access location varies by model; typically mounted along the pump/hoses under the cabinet
• Move hoses/clamps and the electrical connector one at a time; match port orientation
• After installation, run a rinse/drain test and check all connections for leaks

Diverter indicator for washers. Indicates water flow direction during wash cycles. Replace if cracked, broken, or no longer functioning properly.

Diverter lever plate for washers. This internal component controls water flow direction. Replace if cracked, broken, or worn to restore proper operation.

Dispenser inlet nozzle for washers. Connects to the detergent dispenser housing. Replace if cracked, clogged, or leaking during wash cycles.

Secures the detergent dispenser in your washer. Replace if the dispenser is loose, leaking, or not staying in place. Verify fit with your model number.

Control panel not responding or display issues? This washer control housing protects internal electronics and wiring connections for reliable operation.

Self-tapping screw secures washer panels, brackets, and trim pieces. Replace missing or stripped fasteners to restore proper fit and alignment.

This genuine replacement screw secures panels and components on compatible appliances to restore proper fit and reduce vibration or rattling. Use when missing, stripped, or loose fasteners prevent parts from staying in place. What it does

• Fastens trim, panels, or mounting brackets to maintain component alignment
• Restores secure attachment when original screws are missing or damaged
• Helps eliminate noise and vibration caused by loose parts
• Matches the OEM thread profile and length for proper fit

• Use the correct screwdriver or bit to avoid cam-out and damaged heads
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Keep spare screws and small parts away from children and pets
• If threads are damaged, replace mating fastener or insert rather than forcing this screw

Self-tapping screw for securing washer components and panels. Replace worn, stripped, or missing screws during repairs or reassembly of your machine.

Seals the dispenser nozzle to prevent leaks during wash cycles. Replace if you notice water leaking from the detergent dispenser area. Confirm fit with your model.

Secures multiple small pipes to reduce vibration and prevent chafing. Replace if cracked, loose, or causing rattling. Confirm fit with your model.

This hot water out hose directs the appliance's hot water flow from the internal water circuit to the outlet, helping maintain proper discharge and prevent leaks. It's a direct-replacement service hose for systems needing the OEM outlet connection. What it does:

• Channels hot water from the appliance to the outlet or external connection
• Restores proper water flow when the original hose is cracked, split, or leaking
• Helps prevent drips and moisture damage caused by failed outlet hoses
• Works with the appliance's existing clamps and fittings to maintain a sealed connection

• Disconnect power to the appliance and shut off the water supply before starting
• Inspect hose fittings and any O-rings; replace damaged seals for a reliable connection
• Use the original clamps or manufacturer-recommended replacements; tighten securely but avoid over-tightening
• After installation, restore power and water, then run a test cycle and check carefully for leaks

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.