Parts for Briggs & Stratton 201317-0130-E9: Controls, Fuel Supply, Governor Spring Parts

This is a fuel line replacement intended to keep a lawnmower's engine running smoothly. It is long enough to make a couple of fuel lines, just cut the fuel line to the desired length and keep the rest as a spare. When a mower doesn't start easily or performs poorly when running, the fuel delivery system may have a problem and will need repair. The fuel line that supplies gas from the tank to the carburetor may be cracked or broken. When this occurs, it is best to replace the fuel line before it becomes a flammable hazard. This is an OEM replacement fuel line sourced from the manufacturer and is sold individually. This replacement part is compatible with different Briggs & Stratton mowers. Remember to use work gloves and drain the gas tank before the installation of this part.

A hose clamp serves the basic purpose of holding together two connecting hoses. This is a crucial job in an engine. Since there are so many connecting tubes and hoses transferring oil and fuel within an engine, a leak could prove catastrophic. It could not only cause the engine to malfunction but could also become a fire hazard. Replacing a hose clamp is an easy job, though the exact process will depend on where the connection is located. A pair of pliers may be needed. This is a genuine OEM replacement part and will work with a wide range of appliances, such as pressure washers, engines, generators, tractors, mowers, blowers, shredders, and chippers from Murray, Toro, Briggs & Stratton, Snapper, MTD, Lawn-Boy, or Simplicity. This part ships individually.

The stop switch, sometimes called a kill switch, is triggered to stop the engine when the operator is no longer on the seat ,This is important for safety. If the stop switch is not functioning properly, inspect it for damage and replace it right away. Operating a machine without a functional stop switch can be dangerous. The stop switch is a genuine OEM part, and it is sold individually. The switch can work for many types of equipment including lawn tractors, lawnmowers, log splitters, wood chippers, pressure washers, and tillers. The replacement part is compatible with a range of brands, including Midwest Engine, Toro, Craftsman, Briggs & Stratton, Lawn-Boy, Murray, Snapper, and MTD.

This is a genuine replacement fuel tank cap for select Briggs & Stratton engines. It seals the fuel tank to keep the fuel contained and also to create the pressure required to run the fuel system and lead to the combustion process. The fuel cap screws onto the fuel tank and can become worn over time. The cap can also become damaged due to an impact or another incident. In some cases, the cap can get lost or the threads can break or strip entirely. A replacement cap like this one can be the solution for compatible models. This OEM fuel tank cap is manufactured to specific standards by Briggs & Stratton and will fit select models of vertical and industrial engines, including 3.5, 5, 7, 9, and 12.5 HP models. It can also be used on select Toro, Murray, Simplicity, and Snapper models that have a Biggs & Stratton engine and/or fuel tank. The non-vented cap ensures appropriate sealing and fuel containment, and it is made of durable composite plastic material. This fuel tank cap is sold individually. No tools are required to replace this part.

This is a fuel cut-off value that is used in over 150 different small gasoline-powered engines. Those devices that have this value include power vacuums, leaf blowers, pressure washers, and generators. The fuel cut-off valve is a safety feature that sits on the bottom of the fuel tank. In situations where the engine must be cleared of gasoline, this valve is very useful. It allows the gasoline in the fuel line to continue to the carburetor and to be combusted in the cylinder. Once the engine block is drained of gasoline, no further ignition of fuel is possible until the cut-off is reactivated. Although it is out of the way of casual contact, the cut-off can be bumped and damaged by contact with other tools, hoses, or debris. Also, since it is a narrow passage through which gasoline passes, it is possible for contaminants to jam the flow and create a blockage. If the tank is full of gasoline and the carburetor is functioning normally, an engine that won't offer to start at all may be the victim of a faulty cut-off fuel valve. This OEM genuine replacement is compatible with Toro and Briggs and Stratton engines.

This fuel tank is a genuine OEM replacement part for a wide range of snowblowers and blower vacuums. The fuel tank is located on the exterior of an appliance and allows the operator to top up their machine with more fuel. The fuel tank connects to the carburetor through a fuel line and feeds the engine gasoline to create power. This fuel tank holds roughly 2.8 liters, or 3 quarts, of fuel. Although fuel tanks are made of durable reinforced plastic, they can be knocked easily due to their position on the outside of an appliance. If punctured or dented, fuel will start to leak from the tank and present a potential fire hazard. For safety reasons, a damaged fuel tank should be replaced as soon as possible. Using a set of wrenches, unbolt the damaged tank and reassemble with this replacement part. As a high-quality replacement part, this fuel tank comes sourced from its original manufacturer. It is compatible with Briggs & Stratton and Toro appliances. This tank includes a fuel cap but does not include a fuel line or the hardware needed for assembly.