Parts for Ge WCVH4800K2WW: 01 - Controls & Sensor Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This is a replacement washing machine control board assembly manufactured by General Electric.The control board assembly contains the buttons so that the user may select the desired wash cycle, as well as house the display. Over time, control boards are subject to wear and tear, which could cause deterioration that prevents the user from reading the display or selecting the desired wash cycles. Because of the potential risk of electrocution, the appliance should be unplugged from power. Disconnect the water source also, and wear work gloves. As an authentic OEM part, this control board assembly is intended for use with different brands of washing machines manufactured by General Electric, Hotpoint, RCA, and other compatible brands. This part is sold individually and is a genuine part made of high-quality, durable, non-corrosive materials.

A replacement control knob assembly that restores safe, positive control of your appliance's settings. Replaces a cracked, stripped, loose, or missing knob so you can select functions and settings reliably. What it does:

• Provides a secure grip and smooth rotation for selecting temperature or function settings
• Replaces knobs that are cracked, worn, stripped, loose, or missing
• Restores proper control engagement when the original will not turn or won't stay set
• Matches OEM fit and mounting for a straightforward swap

• Always disconnect power to the appliance before starting any repair
• Most installations are push-on: remove the old knob by pulling straight off, then push the replacement onto the control shaft until fully seated
• If the knob is tight or stuck, gently wiggle while pulling; avoid prying on surrounding surfaces

This control panel assembly replaces the oven/range electronic console to restore user controls and display functions. It lets you access cook settings and timer features so the appliance responds correctly to touchpad or button inputs. What it does:

• Houses the electronic control board and user interface for the appliance
• Re-establishes keypad/touch input and display feedback when the original console is faulty
• Commonly used when the control won't register commands, shows errors, or has blank/erratic display behavior
• Restores normal oven/range programming, timers, and status indications

• Power must be disconnected at the breaker before starting work to avoid shock; confirm power is off
• Moderate disassembly of the console/upper trim may be required; keep small fasteners and screws organized
• Handle the assembly carefully to avoid damaging the display lens or ribbon connectors

This liquid detergent insert fits into the washer's dispenser to meter and release liquid detergent at the correct time. Replacing a missing or damaged insert helps prevent early drain-off and supports consistent cleaning performance.

• Adapts the main detergent compartment for use with liquid detergent
• Helps control flow so detergent releases during the wash cycle, not immediately
• Promotes proper dispensing and reduces residue left in the dispenser
• Common clues it's needed: insert missing/broken, liquid runs straight into the tub, or detergent remains in the cup after a cycle

• Disconnect power to the washer before servicing
• Pull out the dispenser, then lift out the old insert
• Align and press the new insert into the detergent compartment until fully seated (follow any "LIQUID"/fill marks)
• Run a quick test cycle to ensure proper dispensing

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This replacement bleach dispenser insert fits into the washer's bleach drawer to hold and release liquid bleach during the wash cycle, helping ensure proper dilution and safer delivery to the drum. What it does:

• Holds liquid bleach in the dispenser so it releases at the correct point in the cycle
• Directs bleach into the wash water to reduce concentrated contact with fabrics
• Prevents bleach from pooling or spilling inside the drawer
• Helps avoid uneven bleaching and fabric spotting when functioning correctly

• Disconnect power to the appliance before servicing
• Remove the dispenser drawer per the washer's service instructions, then lift out the old insert and snap the new insert into place
• Handle bleach residue with gloves and rinse parts thoroughly after installation
• Replace the whole dispenser assembly if the dispenser assembly is cracked or the insert won't seat properly

This replacement drawer dispenser front restores the exterior face of the appliance dispenser drawer, improving fit and appearance while allowing the dispenser to open and close securely. Ideal when the original front is cracked, chipped, or discolored. What it does:

• Replaces a broken or worn dispenser drawer face so the drawer operates and seals correctly
• Keeps the dispenser drawer aligned and helps the dispenser open/close smoothly
• Prevents debris from entering the dispenser area and improves the appliance's finished look
• Useful when the original front is cracked, loose, or cosmetically damaged

• Disconnect power to the appliance before beginning any work
• Remove the dispenser drawer per the appliance service instructions to access the front panel
• Handle plastic parts carefully to avoid damage to clips and tabs during removal and installation
• Secure all clips; do not force or overtighten

This diverter box top directs dishwasher wash water to the upper spray arm so dishes on the top rack get cleaned. It replaces a worn or cracked diverter to restore proper spray distribution and reduce leaks. What it does:

• Routes wash water from the pump to the upper spray arm during the cycle
• Helps maintain correct spray pressure and coverage for top-rack cleaning
• A cracked or clogged diverter can cause poor upper-rack cleaning or water spraying irregularly
• A damaged diverter may allow leaks or reduce wash performance

• One diverter box top

• Disconnect power and turn off water supply before servicing
• Remove the dishwasher tub or access panels as required to reach the diverter; basic hand tools typically required
• Inspect surrounding seals and gaskets during install; replace if they show wear

This drawer dispenser assembly replaces a damaged or worn dispenser drawer to restore secure containment and reliable dispensing in your appliance. It helps keep detergents or dispensing components properly housed and prevents leaks or jams. What it does:

• Holds the appliance's dispenser drawer securely in place during use
• Guides and releases detergent or dispensing materials as designed
• Stops leaks or drips caused by cracked, warped, or broken drawer parts
• Prevents binding or sticking of the dispenser drawer for smooth operation

• Disconnect power and water before beginning any repair
• Remove the drawer or access panel per the appliance service instructions before installing
• Handle plastic components carefully to avoid cracking; use appropriate tools and gentle force

This single water inlet valve controls water flow into the appliance, restoring water supply to the ice maker or dispenser when the original valve fails. Durable replacement that helps stop leaks and restore proper water delivery. What it does:

• Opens and closes to allow water into the ice maker/dispenser when signaled by the appliance
• Commonly replaces valves that fail to supply water or supply reduced/intermittent flow
• Can stop leaks or continuous water flow caused by a stuck or damaged valve
• Works with the appliance's existing water lines and electrical connections

• One single water inlet valve

• Turn off water supply and unplug the appliance before starting any work
• Relieve line pressure and disconnect water line and electrical connector(s) carefully
• Inspect hose fittings and tubing for damage; secure connections and test for leaks after installation

Dual water inlet valve that controls water supply to the refrigerator dispenser and icemaker, restoring proper water and ice delivery and helping stop leaks or erratic flow caused by a failed valve. What it does:

• Routes and controls water flow to the dispenser and icemaker; a defective valve can cause no water dispensing or no ice production.
• Uses two independent solenoids to send water where needed; failure or blockage can cause weak, intermittent, or continuous flow.
• Seals and meters incoming water from the supply line; worn valve seals can lead to leaks or flooding.
• Replaces the factory inlet valve assembly to restore normal water operation when the original valve fails.

• Shut off refrigerator power and the household water supply before starting the repair.
• Relieve water line pressure and disconnect lines carefully to avoid spills; keep a towel and bucket handy.
• Ensure electrical connectors are fully seated and water fittings are snug—do not overtighten plastic fittings.
• After installation, restore water and power, then check all connections for leaks and proper dispenser/icemaker operation.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.