Parts for Dacor CPS127: Conv Oven Parts

This wafer head screw secures panels, brackets, and other components inside your appliance. Replacing worn or missing hardware restores a tight fit, reduces vibration and rattles, and keeps assemblies properly aligned for reliable performance.

• Fastens panels, brackets, or trim with a low-profile wafer head for even clamping
• Replaces stripped, corroded, or missing hardware (#8 x 3/8)
• Helps maintain alignment and reduce vibration or rattling noises
• Restores secure mounting for safe, stable operation

• Disconnect power; also shut off gas before servicing
• Support the panel or component while removing/installing hardware
• Hand-start threads to avoid cross-threading; tighten snugly without overtightening
• Replace screws one at a time to maintain alignment

The Gas Line Trimmer Cover Plate Light is essential for maintaining the functionality and appearance of your gas line trimmer. This genuine OEM part ensures a perfect fit, seamlessly integrating with your trimmer to provide reliable protection and illumination. Crafted from durable materials, the cover plate light safeguards critical components from dust and debris while enhancing visibility during operation. Installing the Gas Line Trimmer Cover Plate Light is straightforward, allowing you to quickly restore your trimmer to optimal performance. This genuine OEM part is specifically designed for Samsung gas line trimmers, ensuring compatibility and longevity. By choosing this cover plate light, you guarantee that your appliance operates efficiently and safely. Whether you need to replace a damaged cover or upgrade your existing setup, the Gas Line Trimmer Cover Plate Light is the perfect solution to enhance your trimmerGÇÖs durability and functionality.

27 inch Dacor ovens.

This broil element heats the top of the oven for broiling and browning, restoring high-heat performance for searing and finishing dishes. Designed to replace a failed or damaged upper heating element. What it does

• Heats from the top of the oven to brown, sear, and broil foods
• Replaces a visibly burnt, broken, or non-heating upper oven element
• Helps fix symptoms such as no broil heat, uneven browning, or visible arcing/sparking
• Works with standard terminal connections used on compatible Samsung ranges

• One broil element (upper oven)

• Disconnect power to the appliance before attempting any service
• Handle element carefully to avoid bending or damaging the tubular element
• Verify terminal connections match your oven and tighten hardware securely

This convection element kit replaces the oven's convection heating element to restore even heat for baking and roasting. Use it when the convection system no longer produces consistent hot air or the oven bakes unevenly. What it does:

• Heats air for the oven's convection cooking mode so the fan can circulate consistent temperature.
• Restores even browning and predictable bake/roast results when the convection element has failed.
• Common symptom indicator: uneven baking or roasting, or visible damage to the element.
• Can be part of repairs when the oven does not reach expected results in convection mode.

• Disconnect power at the breaker before starting any repair — electric shock hazard.
• Access typically requires removing the oven cavity back panel or inner rear panel; use proper tools and follow OEM instructions.
• Inspect wiring terminals and insulation; replace connectors that are corroded or damaged.

Due to manufacturer changes this door latch has been replaced by two other kits. You must contact us with your complete model number for the correct replacement.

This convection oven motor drives the oven's convection fan to circulate hot air for even cooking. Designed as a direct replacement service motor to restore proper airflow and heating performance in compatible Samsung ovens. What it does:

• Spins the convection fan to circulate hot air for more even baking and roasting
• Helps maintain consistent oven temperature by improving air circulation
• Can address symptoms like uneven cooking, hot spots, or a noisy/non-spinning convection fan
• Matches OEM form and mounting for a straightforward replacement when compatible

• One convection oven service motor

• Disconnect power to the appliance before starting any repair
• Handle with care; verify connector and mounting orientation before final assembly
• Wear gloves and eye protection; avoid contact with sharp sheet metal and heating elements

This temperature sensor kit replaces a failed refrigerator temperature sensor to restore accurate temperature monitoring and help the control board maintain proper cooling. It's designed for service replacement and OEM fit. What it does:

• Monitors internal compartment temperature so the refrigerator control can regulate cooling cycles.
• Helps prevent overcooling or warming caused by a faulty or open sensor.
• Common symptom fix: refrigerator/freezer running too warm or too cold, or erratic cycling.
• Clears temperature-related error codes when installed in place of a defective sensor.

• Disconnect power to the appliance before starting any repair.
• Handle sensor tip and wiring gently; avoid sharp bends or pinching the harness.
• Route and secure the sensor wiring per OEM locations to ensure correct readings.

This thermal cut-off switch is a high-temperature safety device that interrupts power if the appliance overheats. Replacing a failed cutout restores proper overheat protection and can help address no-heat or shutdown issues caused by an open safety circuit.

• Monitors temperature at its mounting location and opens the circuit if temperatures exceed a safe limit
• A failed/open cutout can cause no heat, intermittent heating, or the unit shutting off during use
• Helps protect components from damage due to overheating
• Location varies by model; typically mounted to a bracket or surface near a heat source

• Disconnect power at the breaker or unplug the appliance before servicing
• Note wire orientation and transfer leads one at a time to the new switch
• Mount in the original position with firm, flush contact for accurate temperature sensing
• After replacement, inspect airflow/venting and nearby fans/filters to address any underlying overheating causes

The Oven Rack Assembly is a reliable replacement part designed to restore the functionality of your Samsung oven. Crafted as a genuine OEM part, it ensures a perfect fit and seamless integration with your existing appliance. This assembly is constructed from high-quality materials, offering durability and resistance to high temperatures, which is essential for consistent cooking performance. The Oven Rack Assembly provides ample space for baking trays and dishes, enhancing your oven's capacity and convenience. Its easy installation process allows you to replace your old or damaged rack without professional assistance, saving you time and money. Compatible with a variety of Samsung oven models, this genuine OEM part guarantees compatibility and longevity. By choosing the Oven Rack Assembly , you ensure that your oven operates smoothly, helping you achieve delicious meals with ease.