Parts for Electrolux EW30GC60PS3: Cook Top Parts

The Ignitor Screw is an OEM component for Frigidaire ranges and ovens. It secures the igniter, a critical heating element that sparks to ignite the gas burner. 

Causes of a bad ignitor screw can include damage or stripping of the screw head from repeated removal/installation of the igniter component over time.

Symptoms of a bad ignitor screw include: 

• The igniter shaking loose and becoming disconnected
• Inability to properly tighten the igniter securely in position
• Lost or stripped screw

This genuine Frigidaire replacement screw restores secure mounting of the igniter. Proper fastening is necessary for consistent and reliable ignition of cooking appliances.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

A small sealing cap used to cover and protect an exposed fitting or opening on the appliance, helping prevent leaks and contamination. Simple replacement restores a snug, protective seal where a worn or missing cap allowed moisture or debris. What it does

• Covers and seals an exposed port, tube, or fitting to help prevent water, refrigerant, or debris from escaping or entering.
• Restores a tight fit when an original cap is cracked, brittle, or lost.
• Helps stop dripping or minor leaks that occur at uncovered connections.
• Keeps internal parts protected from dust and contaminants.

• Disconnect power and shut off any relevant water or gas supply before service.
• Replace only with the exact cap designed for the specific fitting—ensure proper fit and orientation.
• Inspect surrounding seals and fittings; replace if damaged.

The Range Cap is an OEM part for Frigidaire ranges. It seals the upper combustion chamber to contain heat from the oven burners. A tight-fitting cap is critical for efficient, safe oven performance.  This cap measures 3 inches in diameter.

Causes of a bad cap can include cracks, warping, or collapsed seals from prolonged exposure to high oven temperatures. Accidental damage during past maintenance is also possible.

Symptoms of a bad cap include:

• Escaping heat from the oven chamber, reducing efficiency
• Flames or sparks visible around the cap during baking
• Loose, wobbly, or missing cap allowing grease and debris in the combustion area

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Burner Cap is an OEM part for Frigidaire cooktops and ranges. It is designed to cover the burner head, ensuring an even distribution of the flame for efficient cooking. The burner cap also protects the burner head from spills and debris, which can affect performance.

You should replace the burner cap if it becomes damaged or worn out. Causes of a bad burner cap can include exposure to high heat, buildup of food residue, or accidental impacts. A compromised burner cap can lead to uneven flames, inefficient cooking, or difficulty in lighting the burner.

Symptoms of a bad burner cap include:

• Uneven or yellow flames
• Difficulty in igniting the burner
• The burner cap being cracked, chipped, or discolored
• Poor cooking performance or hotspots on cookware

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Surface Burner Cap is an OEM part for Frigidaire gas ranges. It sits atop the surface burner and helps to distribute the gas flame evenly for consistent cooking performance. The cap also protects the burner head from spills and debris.

You should replace this surface burner cap if it becomes damaged or worn out. Signs of damage include chipping, cracking, or discoloration due to prolonged exposure to high temperatures or cleaning agents.

Symptoms of a bad surface burner cap include:

• Uneven or unstable flame
• Difficulty in igniting the burner
• Visible cracks or chips on the cap
• Food cooking unevenly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Knob is an OEM part for Frigidaire ranges and cooktops. This knob allows users to control the settings and temperature of the burners or oven. It is designed to fit securely on the control shaft and provide easy operation.

Causes of a bad knob can include general wear and tear, exposure to heat, or accidental impact that leads to cracks or breaks. A faulty knob can hinder your ability to accurately control the cooking functions.

Symptoms of a bad knob include:

• Difficulty turning the knob
• Knob slipping or not staying in place
• Visible cracks or damage
• Inaccurate temperature or setting adjustments

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement door gasket creates a tight seal around the refrigerator or freezer door to help maintain interior temperature and reduce energy loss. It restores proper door closure for better cooling and frost prevention. What it does:

• Seals the door perimeter to keep cold air in and warm air out
• Helps maintain consistent internal temperatures for food safety
• Reduces frost build-up and compressor runtime due to air leaks
• Restores proper door alignment and closing performance

• Remove old gasket and clean the door mating surface before installing the new gasket
• Start installation at a corner and work around the door to ensure an even fit
• Gasket may be warmed slightly (hot water or hair dryer on low, if needed) to improve flexibility for positioning
• Unplug or disconnect power to the appliance before beginning work

Note: Quantity of two brackets

Replacement mounting screw used to secure panels and small components on compatible appliances. Restores proper fastening to reduce rattling and keep trim, control panels and brackets aligned for safe, quiet operation. What it does:

• Secures panels, trim, brackets and other small appliance components.
• Replaces loose, missing or damaged fasteners that can cause rattling, gaps or panel misalignment.
• Restores mechanical stability for control panels and interior trim pieces.

• Disconnect power to the appliance before servicing any panels or components.
• Use the correct screwdriver and start the screw by hand to avoid cross-threading.
• Tighten securely but do not overtighten; replace if threads are stripped or the screw will not secure the part.