Parts for Frigidaire FFGC3012TSA: Cook Top Parts

The Range Cap is an OEM part for Frigidaire ranges. It seals the upper combustion chamber to contain heat from the oven burners. A tight-fitting cap is critical for efficient, safe oven performance.  This cap measures 3 inches in diameter.

Causes of a bad cap can include cracks, warping, or collapsed seals from prolonged exposure to high oven temperatures. Accidental damage during past maintenance is also possible.

Symptoms of a bad cap include:

• Escaping heat from the oven chamber, reducing efficiency
• Flames or sparks visible around the cap during baking
• Loose, wobbly, or missing cap allowing grease and debris in the combustion area

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Burner Cap is an OEM part for Frigidaire cooktops and ranges. It is designed to cover the burner head, ensuring an even distribution of the flame for efficient cooking. The burner cap also protects the burner head from spills and debris, which can affect performance.

You should replace the burner cap if it becomes damaged or worn out. Causes of a bad burner cap can include exposure to high heat, buildup of food residue, or accidental impacts. A compromised burner cap can lead to uneven flames, inefficient cooking, or difficulty in lighting the burner.

Symptoms of a bad burner cap include:

• Uneven or yellow flames
• Difficulty in igniting the burner
• The burner cap being cracked, chipped, or discolored
• Poor cooking performance or hotspots on cookware

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Surface Burner Cap is an OEM part for Frigidaire gas ranges. It sits atop the surface burner and helps to distribute the gas flame evenly for consistent cooking performance. The cap also protects the burner head from spills and debris.

You should replace this surface burner cap if it becomes damaged or worn out. Signs of damage include chipping, cracking, or discoloration due to prolonged exposure to high temperatures or cleaning agents.

Symptoms of a bad surface burner cap include:

• Uneven or unstable flame
• Difficulty in igniting the burner
• Visible cracks or chips on the cap
• Food cooking unevenly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This single replacement control knob restores safe, easy control of a range or oven when the original knob is missing, cracked, or worn. It provides a simple push-on replacement to make temperature and function selection straightforward again. What it does

• Replaces a damaged or missing control knob so you can set heat and cooking functions reliably
• Helps eliminate loose, cracked, or non-engaging knobs that make adjustments difficult
• Restores user interface for precise setting selection on ranges and ovens
• Works as a direct, single-knob swap to regain normal operation

• Disconnect power (or shut off gas) and allow appliances to cool before servicing
• Align the knob on the control shaft and push firmly until it seats; do not force if it resists
• If knob uses a retaining screw, tighten securely but avoid over-torquing

This is the user-facing control knob that attaches to a switch or thermostat shaft, allowing you to select appliance settings. Replacing a worn or missing knob restores accurate, positive control and a clean, finished look. What it does:

• Attaches to the control shaft to select temperature, cycle, fan speed, or function (as designed on your model)
• Restores proper grip when the original knob is cracked, stripped, or missing
• Helps ensure the control turns without slipping or free-spinning
• Common symptoms include a loose fit, broken insert, or inability to change settings

• One control knob

• Disconnect power or turn appliance off to prevent unintended operation
• Pull the old knob straight off; if a clip or set screw is present, release it first
• Align the flat/D-shaped insert with the shaft and press firmly until fully seated
• Do not force; if the control shaft is damaged, the underlying switch/thermostat may need service

This replacement door gasket creates a tight seal around the refrigerator or freezer door to help maintain interior temperature and reduce energy loss. It restores proper door closure for better cooling and frost prevention. What it does:

• Seals the door perimeter to keep cold air in and warm air out
• Helps maintain consistent internal temperatures for food safety
• Reduces frost build-up and compressor runtime due to air leaks
• Restores proper door alignment and closing performance

• Remove old gasket and clean the door mating surface before installing the new gasket
• Start installation at a corner and work around the door to ensure an even fit
• Gasket may be warmed slightly (hot water or hair dryer on low, if needed) to improve flexibility for positioning
• Unplug or disconnect power to the appliance before beginning work

Note: Quantity of two brackets

Replacement mounting screw used to secure panels and small components on compatible appliances. Restores proper fastening to reduce rattling and keep trim, control panels and brackets aligned for safe, quiet operation. What it does:

• Secures panels, trim, brackets and other small appliance components.
• Replaces loose, missing or damaged fasteners that can cause rattling, gaps or panel misalignment.
• Restores mechanical stability for control panels and interior trim pieces.

• Disconnect power to the appliance before servicing any panels or components.
• Use the correct screwdriver and start the screw by hand to avoid cross-threading.
• Tighten securely but do not overtighten; replace if threads are stripped or the screw will not secure the part.