Parts for Frigidaire FFGC3626SBF: Cook Top Parts

This cooktop grate provides a stable surface to support cookware on a gas range, restoring safe, even heating for everyday cooking. It replaces damaged or missing grates so pots and pans sit level on the burner. What it does:

• Supports cookware above the burner for safe, stable cooking
• Restores proper burner access and flame clearance
• Replaces cracked, warped, or missing grates that cause instability
• Helps prevent cookware from tipping or scratching the cooktop surface

• Install on a cool, unlit cooktop; position grate over the correct burner until it rests securely
• No tools typically required; handle with care to avoid chipping or scratching finish
• Inspect surrounding cooktop components for damage when replacing parts
• Follow your range manufacturer's safety and maintenance guidelines; disconnect gas/electric per OEM instructions before servicing

This cast-iron cooktop grate supports pots and pans over gas burners, restoring a stable cooking surface and proper clearance for even flames. Durable finish resists heat and everyday wear to keep cookware steady while you cook. What it does

• Holds cookware above burners so flames reach the pot or pan safely and evenly
• Replaces chipped, cracked, or bent grates that cause wobbling or uneven cooking
• Helps prevent direct flame contact with pots that can cause hot spots or damage
• Maintains proper spacing for burner caps and consistent ignition

• Allow the cooktop and burners to cool completely before handling.
• Lift the old grate straight up to remove; set the new grate in place so feet and supports align.
• Check that burners and caps are properly seated and level before use.

This surface burner grate sits over a gas burner on your cooktop or range to support pots and pans securely. Replace a cracked or warped grate to restore safe, level support and consistent cooking performance.

• Supports cookware at the correct height above the flame for proper heating
• Provides a stable, level platform to prevent rocking or tipping
• Helps ensure even contact with heat for more consistent results
• Replace if the grate is cracked, broken, warped, or missing

• Ensure all burners are off and the cooking surface is completely cool
• Lift off the old grate; clean the support area if needed
• Position the new grate so it sits flat and fully engages the support tabs/pins
• Verify burners ignite and flames are unobstructed before cooking

The Range Cap is an OEM part for Frigidaire ranges. It seals the upper combustion chamber to contain heat from the oven burners. A tight-fitting cap is critical for efficient, safe oven performance.  This cap measures 3 inches in diameter.

Causes of a bad cap can include cracks, warping, or collapsed seals from prolonged exposure to high oven temperatures. Accidental damage during past maintenance is also possible.

Symptoms of a bad cap include:

• Escaping heat from the oven chamber, reducing efficiency
• Flames or sparks visible around the cap during baking
• Loose, wobbly, or missing cap allowing grease and debris in the combustion area

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Range Cap is an OEM part for Frigidaire ranges and cooktops. This cap covers the burner head, protecting it from spills and ensuring an even distribution of heat. It is designed to fit securely over the burner, maintaining both the efficiency and safety of the cooking process.

Causes of a bad range cap include cracking, chipping, or discoloration from repeated use, which can compromise its function and appearance.

Symptoms of a bad range cap include:

• Uneven flame distribution
• Visible cracks or chips
• Discoloration or burnt spots
• Difficulty in fitting the cap securely over the burner

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Burner Cap is an OEM part for Frigidaire cooktops and ranges. It is designed to cover the burner head, ensuring an even distribution of the flame for efficient cooking. The burner cap also protects the burner head from spills and debris, which can affect performance.

You should replace the burner cap if it becomes damaged or worn out. Causes of a bad burner cap can include exposure to high heat, buildup of food residue, or accidental impacts. A compromised burner cap can lead to uneven flames, inefficient cooking, or difficulty in lighting the burner.

Symptoms of a bad burner cap include:

• Uneven or yellow flames
• Difficulty in igniting the burner
• The burner cap being cracked, chipped, or discolored
• Poor cooking performance or hotspots on cookware

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Surface Burner Cap is an OEM part for Frigidaire gas ranges. It sits atop the surface burner and helps to distribute the gas flame evenly for consistent cooking performance. The cap also protects the burner head from spills and debris.

You should replace this surface burner cap if it becomes damaged or worn out. Signs of damage include chipping, cracking, or discoloration due to prolonged exposure to high temperatures or cleaning agents.

Symptoms of a bad surface burner cap include:

• Uneven or unstable flame
• Difficulty in igniting the burner
• Visible cracks or chips on the cap
• Food cooking unevenly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Color: Black

This refrigerator door gasket provides the flexible seal around the fridge door to keep cold air in and warm air out, helping the appliance hold temperature and run efficiently. What it does:

• Seals the door perimeter to maintain consistent internal temperature and reduce energy use
• Prevents warm, moist air from entering and causing excess frost or condensation
• Helps the compressor run less frequently by preserving the cold air seal
• Common symptoms of failure: visible cracks, tears or gaps in the seal, cold loss in the compartment, frost buildup or condensation on or around the door

• Disconnect power to the appliance before starting any repair
• Remove the old gasket and inspect the mounting surface for debris or damage before installing the new seal
• Seat the gasket evenly around the door; ensure full contact with the cabinet for an airtight fit

Note: Quantity of two brackets

Replacement mounting screw used to secure panels and small components on compatible appliances. Restores proper fastening to reduce rattling and keep trim, control panels and brackets aligned for safe, quiet operation. What it does:

• Secures panels, trim, brackets and other small appliance components.
• Replaces loose, missing or damaged fasteners that can cause rattling, gaps or panel misalignment.
• Restores mechanical stability for control panels and interior trim pieces.

• Disconnect power to the appliance before servicing any panels or components.
• Use the correct screwdriver and start the screw by hand to avoid cross-threading.
• Tighten securely but do not overtighten; replace if threads are stripped or the screw will not secure the part.

The Ignitor Screw is an OEM component for Frigidaire ranges and ovens. It secures the igniter, a critical heating element that sparks to ignite the gas burner. 

Causes of a bad ignitor screw can include damage or stripping of the screw head from repeated removal/installation of the igniter component over time.

Symptoms of a bad ignitor screw include: 

• The igniter shaking loose and becoming disconnected
• Inability to properly tighten the igniter securely in position
• Lost or stripped screw

This genuine Frigidaire replacement screw restores secure mounting of the igniter. Proper fastening is necessary for consistent and reliable ignition of cooking appliances.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.