Parts for Briggs & Stratton 196437-1237-E1: Crankcase Cover, Crankshaft, Breather, Cylinder, Pistons, Oil Parts

Prevents oil leaks around the crankshaft in small gas engines. Replace if oil seeps from the bottom of the engine. Verify fit with your model number.

Fix oil and coolant mixing or overheating with this engine cylinder head gasket. Seals combustion between block and head. Moderate DIY repair.

Fix exhaust leaks and pressure issues with this engine breather gasket. Creates a seal for proper gas flow and valve pressure regulation in lawn equipment.

This crankcase gasket is a genuine Midwest Engine part, sold individually. This crankcase gasket can be used as a replacement part in snowblowers, lawn mowers, and lawn tractors. The function of the crankcase gasket in these tools is to seal off the crankcase so that oil cannot leak out of it and dirt and debris cannot accumulate inside of it. A broken, malfunctioning, or loosened crankcase gasket can result in the accumulation of dirt, debris, and pebbles inside the crankcase and the crankshaft of outdoor appliances, which can cause damage to the engine; additionally, oil leakages can occur if the crankcase gasket is loose or damaged. If either of these symptoms is the case, this genuine OEM replacement part should be ordered immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This crankcase gasket is compatible with the following brands: Midwest Engine, Briggs & Stratton, Toro, Simplicity, Cub Cadet, and Lawn Boy.

Seals space between engine components to prevent leaks. Replace if current gasket is missing, damaged, or causing oil/fuel leaks. Verify fit with your model.

Replacement mounting screw for small engines. Secures engine components and covers. Order a new screw if yours is stripped, missing, or damaged.

Fix oil leaks or perform routine oil changes with this engine oil drain plug. Threads into the oil tank base for secure drainage. Simple DIY repair.

Prevents oil leaks around the crankshaft in small gas engines. Replace if oil seeps from the bottom of the engine. Verify fit with your model number.

Replacement oil fill cap for lawn and garden engines. Secures the oil dipstick and fill tube with plastic threads. Replace if cracked, stripped, or missing.

Standard piston ring set seals combustion chamber and controls oil consumption. Replace when engine loses compression, burns oil, or during rebuild.

Connecting rod for lawn and garden engines. Links the piston to the crankshaft during engine operation. Replace if bent, cracked, or worn bearings.

This part is a replacement valve retainer. This is a genuine OEM part made by Midwest Engine and has been sourced directly from the manufacturer. It can be used to replace a broken or defective valve retainer in a variety of small engine power equipment. The valve retainer helps to make sure that the valve spring stays securely locked into place. This ensure the engine is held securely together so the user does not have any issues running the equipment. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this valve retainer, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this valve retainer is suitable for use on several different models of small engine power equipment manufactured by Midwest Engine. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

Valve keeper for lawn and garden engines. Secures valve spring retainer to valve stem. Replace if broken, cracked, or missing during engine rebuild.

Dipstick tube seal prevents oil leaks and keeps air out of the crankcase. Replace if oil seeps around tube or seal shows wear. Verify fit with model.

Engine won't start or runs rough? A cracked or missing spark plug boot causes misfiring and prevents proper ignition. Easy DIY replacement part.

This screw is designed to be used on all sorts of lawn and garden equipment. The metal screw is durable and attaches to the muff guard bracket to keep it in place and stable while the equipment is being used. This screw can become damaged through overuse or wear and tear. It can also break or become stripped, which will require it to be replaced.Visually inspecting the area with the muff guard bracket is connected to the rest of the equipment will give information about whether the screw is broken or damaged. The screws can also be cleaned to be more visible so small problems are easier to pick up on. Sometimes the screws can become loose, which is another situation where a replacement is needed. Simply use a screwdriver to take out the old screw and replace it with a new one.This screw is a genuine OEM replacement part that is directly sourced from the manufacturer. It comes as an individual part. The screw can be used on snowblowers, lawnmowers, lawn tractors, tillers, pressure washers, leaf blowers, edgers, generators, wood chippers, and log splitters made by MasterCut, Simplicity, MTD, Snapper, Lawn-Boy, Wheel Horse, Cub Cadet, Toro, Craftsman, and Briggs & Stratton.