Parts for Mcculloch CS380: Crankcase Parts

This replacement part is a screw and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Screws are an important part of many different types of machinery as they hold other parts in place and secure. A new screw might be needed if the current ones are loose or missing. It is common that screws might become stripped overtime and will need to be replaced. Be sure to double check the size of the screw as many places on lawn equipment will require different size screws. Be sure the appliance is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This oil tube is a genuine Husqvarna part, sold individually. This oil tube can be used as a replacement part in a chainsaw. The purpose of an oil tube in a chainsaw is to measure the level of oil in the chainsaw to see if a replacement of oil will be necessary in the moment or at some point in the near future.The oil tube in a chainsaw might have to be replaced if the tube suffers damage that prevents it from accurately assessing and displaying the level of oil in the chainsaw. This could occur if the oil tube is punctured, dented, ripped, torn, scraped, warped, eroded, or otherwise damaged to the point of reduced efficacy or negated functionality. If this occurs, the oil tube should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This oil tube is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Craftsman.

Here is a replacement check valve for use with a wide range of different types of equipment and machines. The check valve is a one-way valve that is used in various types of lines as a means to prevent backflow. In the case of engines, the valve is used as a means to prevent fuel or oil from flowing backward. The check valve has the potential to wear down or crack over time. If this happens, it will no longer be capable of stopping backflow from oil or gas, and it will need to be replaced. Owners should examine the check valve when they are inspecting their machine to see if it is still in good working condition. This is a genuine OEM replacement check valve. It is made from durable plastic and is sold individually. The part can be used for more than 150 models of chainsaws. It can also be used with some models of trash compactor, string trimmers, and hedge trimmers. Compatible brands include Craftsman, Husqvarna, Weed Eater, Poulan, Poulan Pro, Broan, Paramount, and Turf King.

A fuel line fitting connects two separate sections of the fuel line. Over time and continued use, even durable fuel lines can become cracked, split, or broken, leading to leaks and the need for repair. If you have a fuel line that is separated or severely damaged, a fuel line fitting can be used to make a simple repair that can save you time and money. Depending on where in the equipment the damaged fuel line is, the repair steps can vary. Several fuel line fittings may be needed depending on the severity of the equipment’s damage. This repair will require a nut driver, forceps, a pair of pliers, screwdrivers, and a socket set to complete. This plastic fuel line fitting is compatible with numerous small engines for lawn and garden maintenance like leaf blowers, hedge trimmers, or chainsaws that are manufactured by many brands, like Husqvarna, Jonsered, Poulan, and Weed Eater. This fuel line fitting is a genuine OEM part.

This is a tank cap assembly that is used on many models of chainsaws. It is located on the fuel tank and is designed to ensure all fuel stays within the container. A retainer is included with the tank cap assembly to prevent dropping the cap and allowing dirt and debris into the fuel tank. An O-ring is used to seal the cap in the proper position. Tank caps can be damaged or lost, which can lead to dirty fuel, so the part will need to be replaced.Before replacing the tank cap assembly, make sure the chainsaw is off and the engine is cool. Place the chainsaw on its side and unthread the original tank cap assembly if it is still present. Pull the retainer from the fuel cap. Replacing the cap requires no special tools, but a pair of work gloves can be helpful. Take the new tank cap assembly and place the retainer into the tank. Thread the new cap on and tighten it before use.This part is made to be compatible with Poulan and Craftsman chainsaws. This tank cap assembly is an authentic OEM part that is priced as an individual part. It is directly obtained from the manufacturer.

This isolator spring is a genuine Husqvarna part, sold individually. This isolator spring can be used as a replacement part in a chainsaw. The purpose of an isolator spring in a chainsaw is to minimize excessive vibration and shaking that can occur during the typical use of the appliance so that the operator can comfortably use the chainsaw.The isolator spring in a chainsaw might have to be replaced if it is damaged to the point that the spring tension can no longer be maintained. This could occur if the isolator spring is sufficiently damaged through puncturing, denting, cracking, warping, or eroding. If this occurs, the isolator spring should be removed and replaced by this genuine OEM replacement part to guarantee safe use of the appliance. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This isolator spring is compatible with the following outdoor appliance brands: Husqvarna and Poulan.

The Fuel Pick Up Assembly is an OEM part for Husqvarna outdoor power equipment, including chainsaws, trimmers, and blowers. This assembly is responsible for drawing fuel from the tank to the carburetor, ensuring the engine receives a steady supply of fuel for optimal performance.

Over time, the fuel pick up assembly can become clogged or damaged due to debris in the fuel, exposure to ethanol-blended gasoline, or regular wear and tear. If the fuel pick up assembly is compromised, it can lead to poor engine performance or difficulty starting the equipment.

Symptoms of a bad fuel pick up assembly include:

• Engine not starting or hard to start
• Engine stalling or running inconsistently
• Reduced power or performance
•  Visible damage or clogging in the fuel line

This OEM Husqvarna part ensures proper fuel delivery and compatibility with your outdoor power equipment.

This is an authentic replacement part for the chain catcher used on chainsaws. The chain catcher is an important safety feature. In the event that the chainsaw chain becomes loose from the track or breaks, the chain catcher keeps it from sailing off the guide bar. The chain catcher is made from metal and it tends to be very durable. However, corrosion and other types of damage may prevent it from being effective. If the chain catcher is damaged or if it is lost, it should be replaced before using the chainsaw again. This is a genuine OEM replacement chain catcher that is sold individually. The screw used to secure the catcher to the chainsaw is sold separately. Buyers may want to buy the parts at the same time. This piece is specifically for use with chainsaws. Compatible brands include Husqvarna, Craftsman, Poulan, and Poulan Pro. When purchasing the chain catcher, buyers must be sure it is the correct option for their make and model.