Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Crosley Washer Dryer Combo Fuse Or Sensor

Best Seller
Crosley Flame Sensor
Genuine Whirlpool part
By: Whirlpool
Part Number: WP338906

The Flame Sensor is an OEM replacement part for Whirlpool gas dryers. This component plays a critical safety role by monitoring the presence of the gas burner flame during the drying cycle.

Causes of needing to replace the flame sensor can include normal wear and tear over extended use, exposure to high temperatures or corrosion, or physical damage to the sensor itself.

Symptoms that may indicate a faulty flame sensor include:

  • The dryer not heating or producing heat properly
  • Error codes related to the gas system or ignition failure
  • The dryer shutting off unexpectedly during cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas dryer models. 

This part fixes the following symptoms
  • Shuts off too soon
  • No heat or not enough heat
  • Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You 11 year old kenmore elite gas drye stopped working initial diagnosis: burner would light but would shut off in 3 or 4 minutes   Jay W. • Dallas , TX • April 05, 2015

I used Fixya as an initial source describing my problem. I got two responses which were very helpful. One that the "coils" were probably the problem. Two, that the problem could be the thermostat or a thermistor in the dryer. I verified that AC was coming from the timing control, that both the two terminal and three terminal coils,the igniter and shut off thermostat all had continuity. I then applied AC directly to the coils: the two terminal coil ""clanked" and I interpreted that as the coil... Read more

More
$34.95
Compare At:
$41.59
You Save:
$6.64

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley High-Limit Thermostat
Genuine Frigidaire part
By: Frigidaire
Part Number: 3204267

The High Limit Thermostat is an OEM part for Frigidaire dryers. It serves as a critical safety device, designed to cut off the power to the heating element if the dryer overheats. This thermostat helps prevent potential fire hazards by maintaining a safe operating temperature within the dryer.

Symptoms of a bad High Limit Thermostat include:

  • The dryer not heating up at all, indicating that the thermostat may have tripped or failed permanently.
  • Dryer repeatedly shutting off during cycles, which can be a sign that the thermostat is tripping too frequently due to overheating issues.
  • Excessive heat in the dryer, suggesting that the thermostat is not functioning properly and failing to regulate the temperature.

Causes of a bad high limit thermostat can include restricted airflow due to a clogged lint filter or venting system, malfunctioning heating elements that generate excessive heat, or simply the thermostat wearing out over time.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms
  • Shuts off too soon
  • Too hot
  • Takes too long to dry
  • No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You The dryer did not heat!   Linda R. • La Jolla , CA • November 30, 2014

My appliance repair guy checked out the problem, but the stack washer dryer required the contractor to dismantle the cabinet to allow the repair to occur. So i wanted the parts available for the repair, so we would not have to have the dryer pulled apart in a small space for an extended time i ordered the parts on Friday afternoon and they arrived at my home before noon on Saturday! The contractor and the repairman were able to coordinate the repair on Tuesday morning, and though the... Read more

More
$38.95
Compare At:
$62.47
You Save:
$23.52

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Thermal Limiter
Genuine Frigidaire part
By: Frigidaire
Part Number: 134120900

The Thermal Limiter is an OEM part for Frigidaire dryers. It acts as a safety feature, designed to prevent the dryer from overheating by shutting down the appliance when the internal temperature exceeds safe limits. 

Symptoms of a failing Thermal Limiter include:

  • The dryer failing to start or stopping abruptly during a cycle
  • No heat being generated while the dryer is running
  • The dryer overheating or feeling excessively hot

Common causes for a bad thermal limiter include restricted airflow due to a clogged lint filter or venting system, component failure from age or faulty manufacturing, and unusually high operating temperatures from overloading the dryer or mechanical failures elsewhere in the system. When a thermal limiter trips or fails, it must be replaced to restore functionality to the dryer.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms
  • Shuts off too soon
  • Too hot
  • Takes too long to dry
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You Worn bearing and felt causing dryer drum to rattle and creek   Bay S. • Bothell , WA • January 05, 2016

Recommendations have fun and a bucket to prevent losing parts. First watch the videos, practice disassemble and reassemble the dryer drum. Make certain you have a good screw driver and spatula from kitchen (could not find my putty knife). Secondly, clean and inspect everything, make sure the motor bearing and belt pulleys are in good condition with little or no play. Third after you have confidently disassembled, vacuum cleaned, inspected all the worn parts, grease the motor and pulley,... Read more

More
$11.95
Compare At:
$14.22
You Save:
$2.27

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Crosley Control Thermostat (Electric)
Genuine Frigidaire part
By: Frigidaire
Part Number: 134048800

This dryer control thermostat regulates internal temperature by cycling the heater on and off. Replacing a failed thermostat restores proper, consistent drying temperatures to protect fabrics and improve overall drying performance.

  • Monitors exhaust temperature and opens/closes contacts to maintain target heat
  • Helps prevent underheating and overheating during drying cycles
  • Common symptoms of failure: no heat or low heat, long dry times, runs too hot, inconsistent temperatures
  • A sticking thermostat may cause the high-limit safety to trip
What's included: 1 control thermostat Install notes:
  • Disconnect power before servicing
  • Access location varies by model; typically mounted on the blower or heater housing
  • Move wires one at a time from the old thermostat to the new one; ensure tight, secure connections
  • After replacement, clean the lint path and verify exterior venting for proper airflow

Do-It-Yourself Stories from Customers like You My dryer was taking too long to dry my clothes.   Gerard C. • Millville , MA • March 08, 2017

I replaced both thermostats, the seals and the heating element and the belt. It's an easy job to keep my dryer last longer. Read more

More
$81.21
Compare At:
$95.83
You Save:
$14.62

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart

Crosley washer dryer combo Fuse or Sensor replacement parts are crucial for maintaining the functionality and efficiency of your appliance. These essential components ensure your machine operates safely and effectively. Every part in an appliance has a significant role, and fuses and sensors are no exception.

Crosley washer dryer combo parts, such as fuses and sensors, are designed to protect your appliance from electrical issues and manage functions like water levels and temperature. Opting for OEM replacement parts is wise, as these are built to the exact specifications of your machine, ensuring the best fit and performance. High-quality, compatible parts mean less worry about potential hazards or malfunctions, allowing your Crosley washer dryer combo to perform at its best.

You can count on the availability and quality of replacement fuses and sensors to maintain or restore the efficiency of your Crosley appliance. It's reassuring to know that with the right parts, your washer dryer combo will keep running like a charm.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store