Cub Cadet Home Maintenance Chipper Shredder Parts

This washer is a genuine MTD part, sold individually. This washer can be used as a replacement part for a variety of small engine outdoor appliances including lawn mowers, snowblowers, tillers, leaf blowers, log splitters, wood chippers, and edgers. The purpose of a washer for such outdoor appliances is to provide separation and sealing between fastening components of the appliance so the fastening components are not damaged from friction.The washer is a small component that can be easily lost or misplaced. Additionally, it may become warped or damaged. If any of these things occur, this genuine OEM replacement part should be ordered. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This washer is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Yard Machines, Yard-Man, and Troy-Bilt.

This is a pawl that can serve as a replacement for some mower models, as well as chippers and shredders. The pawl attaches to the ratchet pawl plate. The pawl is essential for starting the engine. When the starter turns, the pawl is forced outward and locks onto the flywheel, allowing the engine to start. When the starter rope is let go, the springs pull back the ratchet pawls. If there is damage to the pawl, the engine will not start.The piece is made from durable metal, and it is built to last. However, it can start to wear down over time. Additionally, there is the potential that it could corrode. If there are issues with the pawl, replace them as soon as possible to ensure their machine continues to operate properly.This pawl can work with select models from MTD, Troy-Bilt, Yard-Man, Cub Cadet, and Husky. The piece is a genuine OEM replacement part sourced from the manufacturer. It is sold individually.

This replacement part is an oil filler tube is intended for use in different types of lawn equipment. It is a genuine replacement part made by MTD. This tube allows the user to easily fill the tank with oil without having to worry about spills.A new oil filler tube might be needed if the current one is missing or damaged. It is possible that the tube can become damaged after years of normal wear and tear. If this is the case the user should plan to replace it immediately so that the tank is able to be refilled. Be sure to wear work gloves when replacing this part as there might still be oil in the tube. This is a genuine OEM replacement part to ensure long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

This replacement part is an external gasket kit. This is a genuine replacement part made by MTD. Gasket kits typically work with the engine to ensure that all parts are working correctly so that the engine is able to power on effectively. A new external gasket kit might be needed if the current one is no longer working properly. This can be due to normal wear and tear or an incident that caused it to stop working. If the engine is struggling to power on or off, it could be due to a faulty gasket kit and should be replaced if this is the case. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This fuel tank bottom bracket is a genuine MTD part, sold individually. This fuel tank bottom bracket can be used as a replacement part for small engine outdoor appliances including lawn mowers, leaf blowers, and wood chippers. The purpose of a fuel tank bottom bracket is to stabilize the placement of the fuel tank.If the fuel tank bottom bracket is compromised to the point that it can no longer bolster the placement of the fuel tank, the fuel tank bottom bracket should be removed and replaced by this genuine OEM replacement part, in accordance with the relevant instructions from an appliance manual.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This fuel tank bottom bracket is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Huskee, Yard Man, and MasterCut.

This part is a replacement push rod guide. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended for use as a replacement for a broken or defective push rod guide on various lawnmower models. The push rods themselves are what transfer oil to the equipment's cylinder head. They also help to locate the rocker arms, and the push rod guide plate is necessary for securing and locating the pushrods. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this push rod guide, the appropriate owner's manual and equipment diagrams should be referenced. This push rod guide is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with lawnmowers that have been manufactured by MTD, Yard Man, Cub Cadet, Husky, and Troy-Bilt.

This recoil spring and pulley assembly is used in a variety of small gasoline engines that power devices such as mowers, lawn tractors, and log splitters, among other yard and landscaping devices. The assembly works by tightly coiling the spring in the starter housing. When the starter rope is pulled, the tension on the spring is suddenly released, creating a spark that fires the air/fuel mixture. The combustion starts the engine. The constant tightening and releasing of the tension at times will cause wear on the spring, resulting in the need to replace the spring and pulley assembly. To replace the recoil starter assembly, begin by removing the housing. Next, untie or starter rope and check to see if it is frayed and needs to be replaced as well. Remove the old assembly and install the new unit. Remember when re-tensioning the spring to wind the pulley in the opposite direction. Holding the pulley tightly so the spring does not release, attach the cap. Reattach the rope and coil it around the pulley. It is advisable to wear gloves for this task because the pulley and springs have sharp edges. This OEM certified replacement assembly is compatible with Yard-Man, Husky, Cub Cadet, MTD, Yard Machines, and Troy-Bilt yard equipment.

The replacement flat washer here is a part commonly found on many types of small engines, including those in lawn and garden equipment. The washer can be used on various parts of the engine depending on the make and model. The washer can help to spread the pressure of the connection over a wider surface area. This will help reduce damage to the machine at the connection point. The washers are made from metal and there may be a need to replace them. If they have become corroded, bent, or lost, they should be replaced right away. Owners should keep in mind what with some models, the washers will be secured with the use of a push pin. The push pins are sold separately. This is an authentic OEM replacement flat washer that is sold individually. The washer can be used on many types of equipment including lawn mowers, snowblowers, tillers, string trimmers, leaf blowers, edgers, log splitters, and wood chippers. Compatible brands include Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut.

This genuine MTD shoulder screw is an OEM replacement for use on select MTD machines and outdoor power equipment. The shoulder screw has several applications depending on the exact model of equipment, although it is often used to hold handles in place on push mowers. These screws can become worn or get lost over time, necessitating a replacement. It's important to always use genuine OEM parts when making a replacement on outdoor power equipment. This OEM shoulder screw is manufactured to exact standards by MTD and designed to work with several machines that are manufactured by the brand, along with select models from other outdoor power brands. It is sold as an individual unit, and those who need more than one will have to purchase additional quantities. This part can generally be replaced with minimal effort and won't usually require much disassembly. Gloves should be worn for safety whenever working on outdoor equipment, and it may be a good idea to disconnect the spark plug, as well.