Parts for Craftsman 143016000: Cycle Engine Parts

The oil seal is designed to stop fluid from leaking out, as well as to ensure that dirt and other debris do not make their way into the oil. When applied properly, it should create an impermeable seal. It also provides spacing between the crankcase and the crankshaft. If the oil seal has been damaged or has degraded because of wear and tear, it will need to be replaced. Some of the signs that the oil seal might be bad include leaks or an engine that is not performing properly. Users might also notice that the machine is going through oil quickly. This is an authentic OEM product that is sold individually. The oil seal can be used with many types of lawn and garden equipment including lawn mowers, snowblowers, tillers, pressure washers, wood chippers, generators, and other small engines. Compatible brands including Briggs & Stratton, Simplicity, Snapper, MTD, Lawn-Boy, Tecumseh, Cub Cadet, Toro, and Craftsman.

Here is a genuine replacement governor shaft that can be used with many types of small engines. The metal governor shaft is used in the cylinder cover to help hold the governor spool and the gear. Without a properly functioning governor shaft, it will cause performance issues with the machine. The shaft is made from metal, and it is durable. However, there may still be a need to replace it at some point. It could have become corroded or damaged, or it could have become lost during another repair. Regardless of the reason, owners will want to replace it sooner rather than later. A wrench and pliers will be needed to make the replacement. This is an authentic OEM part that is the same as the original on the machine. It is sold individually. The part can work with many makes and models of lawnmower, snowblower, log splitter, generator, wood chipper, pressure washer, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Tecumseh, Lawn-Boy, Snapper, MTD, and Simplicity.

This is a genuine replacement flywheel nut that comes from the manufacturer Tecumseh. Nuts are used in various applications in a range of different types of machines. This flywheel nut is made from metal and is used to fasten the engine's flywheel to the crankshaft assembly. It helps to ensure that the connection is tight and that it does not start to come loose during operation. Nuts are a commonly lost part when making repairs on a machine or even during routine maintenance. The flywheel nut could also become corroded or otherwise damaged over years of use. If this happens, owners will want to be sure to replace the nut as soon as possible. Replacement for the flywheel nut tends to be fast and simple. This is an authentic OEM flywheel nut that is sold individually. The nut is a common part and can be used on many different machines. These include lawn mowers, snowblowers, generators, log splitter, wood chippers, pressure washers, generators, tillers, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Cub Cadet, Tecumseh, Lawn-Boy, Snapper, MTD, and Simplicity.

Spark plug covers can help to ensure added protection for the sparkplugs and can make sure that there is no debris getting on them. While the spark plug covers are long-lasting, they will eventually need to be replaced. Over time, they will start to dry, crack, and come apart. When this happens, replace the covers right away. Also replace the spark plugs at the same time. The OEM spark plug cover is sold individually, be sure to get enough to cover all the plugs. The cover can work with many different brands, including Craftsman, Briggs & Stratton, Toro, Cub Cadet, Troy-Bilt, Tecumseh, Lawn-Boy, Snapper, MTD, and Simplicity. The covers can work for many types of machines, including lawnmowers, generators, chippers, log splitters, edgers, pressure washers, tillers, and other small engines.

This is a genuine cylinder head bolt replacement designed for use on select small engines found in outdoor power equipment. The cylinder head bolt is responsible for securing the cylinder head in the engine. It is exposed to constant vibrations and high pressure, which can lead to eventual wear and damage. These bolts will need to be replaced immediately if they become damaged or broken. If the bolts are not replaced, the cylinder head will not be secure and that could cause further engine damage or total failure. This genuine OEM replacement bolt is manufactured by Tecumseh and designed for use in engines in a number of its small outdoor power machines. This part is compatible with dozens of engines and the exact number of bolts and placement may vary based on the model. The parts diagram should provide information on the application and location of this part. This bolt is sold as an individual unit, and those who need more than one will have to order multiple quantities. Always wear gloves for hand protection and allow the engine to cool before performing any engine repairs. This replacement bolt requires a hex socket or screwdriver.

This on-off switch terminal is composed of electrical contact areas that connect to a charge or load on a battery. One is marked for positive current while the other is where the current returns to. These terminals can sometimes stop working or suffer corrosion which makes them dangerous to use. Brushing and cleaning a terminal can help remove dirt and debris, but a malfunctioning terminal requires a replacement. This is the case if the corrosion is severe enough to eat away at the metal or the terminal doesn’t clamp on the way that it should. The battery terminals can be removed and replaced using tools like pliers, a socket set, a wrench set, and a hacksaw. This terminal is a genuine OEM component directly from the manufacturer. It’s designed to be used on engines of snowblowers, lawnmowers, chipper shredders, and tillers. It is compatible with Tecumseh, Husqvarna, Toro, Troy-Bilt, Craftsman, Simplicity, Cub Cadet, Briggs & Stratton, and MTD equipment. Some items that can help with installation include anti-corrosion spray, felt pads, and heat-shrink tubing.

This is an air cleaner collar used on carburetors found in outdoor power equipment. The air cleaner prevents dirt, dust, or debris from entering the engine, preventing serious problems. The air cleaner collar attaches to the carburetor and provides support to the air filter.A new air cleaner collar may be needed if the original is broken, cracked, or damaged in any way. A functional air cleaner collar is vital to keep dirt and debris out of the engine.This part is a genuine Tecumseh part and is an OEM part sourced directly from the manufacturer and it is sold individually. This air cleaner collar is compatible with four-cycle horizontal engines that are manufactured by Tecumseh or Husqvarna.

This is a genuine replacement hex screw that is used in select outdoor power equipment engines. The hex screw is a generic, general use part that has several applications depending on the unit. It is small, so it may be lost or misplaced over time or during repairs. These durable metal screws are also known to wear due to the constant exposure to high heat and vibrations. If screws are damaged or go missing, they will need to be replaced in order to ensure the machine is safe to operate.Whenever replacing small parts, it is a good idea to wear gloves and keep a magnetic tool around in case screws fall into the engine. Always allow the engine to cool completely before working on power equipment. A Torx screwdriver or socket wrench will be required to replace this part. This hex screw is a genuine OEM part manufactured to exact standards by Tecumseh and designed for use in machines and engines from the brand along with those from Husqvarna, Toro, and Lawn Boy. Typically, these screws are found in lawnmowers, but they can be used in other equipment as well.

This is a muffler. Designed for use in lawn mowers and pressure washers, the muffler is typically located by the cylinder head. The muffler is tasked with forcing engine sound to go through a chamber that eliminates noise. If there is an issue with this component, the equipment may create bad smells, cause loud noises, or use up fuel too quickly. A muffler that is damaged, missing, or malfunctioning should be replaced.Replacing the muffler will require a flathead screwdriver, hammer, socket, Phillips screwdriver, and pliers. Before starting, turn off the engine and make sure the muffler is cool. Remove the spark plug wire before bending the mounting tabs away from the muffler. Loosen and unthread the bolts to remove the muffler from the cylinder. Place the heat shield and gaskets on the new muffler and unthread the screws on the engine cover. Remove the fuel tank and blower housing before installing the new muffler. Replace all parts and the spark plug wire before use.This part is designed to be compatible with Craftsman, Briggs & Stratton, Toro, Tecumseh, and Lawn Boy lawn mowers, pressure washers, and other equipment with small engines. It's a genuine OEM replacement part sourced directly from the manufacturer. It's sold as an individual part.

This is a genuine OEM screw replacement sourced directly from the manufacturer. It is a muffler stud screw used on lawn mowers, snowblowers, and other outdoor lawn and garden engines. This muffler screw attaches the muffler to the engine. These screws go directly through the muffler case and into the engine housing. There is no need for a nut or other fastener. Over time, vibration from the engine may cause them to loosen and possibly fall out. If this happens, the muffler can fall off. Periodic inspection and tightening will prevent this from occurring. A visual inspection as well as checking the tightness by hand will reveal any issues.If the screws are missing or rusted and need to be replaced, make sure the muffler has cooled before attempting to remove the screws. Use a wrench to remove the screws from the muffler. Insert the new screws and hand tighten. Use the wrench to tighten slightly more. Be careful not to overtighten and strip the screws. These screws are 1/4-20 x 2-9/32, gold in color, and sold individually. These muffler shoulder screws are compatible with lawnmowers, snow blowers, chippers, edgers, pressure washers, and other engines manufactured by MTD, Craftsman, Tecumseh, Toro, and Cub Cadet.

This is a genuine engine recoil starter cup that is designed for use in several different styles of outdoor lawn and garden equipment engines. This engine recoil starter cup is part of the starter recoil assembly and is used to attach various parts to the engine. The starter cup's primary role is to engage the flywheel when the starter rope is pulled. Although it is made of durable metal, this part can become warped or otherwise damaged over time and with constant exposure to high temperatures. If the part fails to work, the engine may not be able to engage until it is replaced. This engine recoil starter cup is manufactured by Tecumseh and is an OEM replacement part. It works with several models of outdoor power equipment engines, including those in machines from Craftsman, Sears, Lawn Boy, MTD, Troy-Bilt, and Tecumseh. The part is sold individually and does not include hardware. Allow the engine to cool completely and wear gloves for hand protection whenever performing engine repairs. If additional parts of the starter recoil assembly need to be replaced, those will require an additional purchase.

This screw is a versatile and genuine OEM part that can be used in various products. Screws are threaded fasteners that hold objects together. This generic product makes use of an external thread, or helical ridge, to fasten materials by engagement of a screw thread with an internal thread in the complementary part. The screw is sourced directly from the manufacturer. The part can become lost due to a variety of factors relating to general use. If the part is lost through general use, it can be replaced simply. Each screw is sold individually from the manufacturer. The part can be installed with a screwdriver and should only take a few minutes to replace. Make sure to inspect screws frequently in case a replacement screw is required. This generic screw part can be used with engines, snowblowers, and lawnmowers. Specifically, the product can be used with the Husqvarna Tec (1997-04) Engine as well as a variety of Toro snowblowers and lawnmowers. Users should check their manuals to ensure part compatibility before purchase as there are more than 150 compatible models.

The Lawn & Garden Engine Bracket Regulator is a key component designed to enhance the stability and performance of your lawn and garden engine. This genuine OEM part ensures a precise fit, providing reliable regulation for engine brackets and maintaining optimal alignment during operation. Crafted from high-quality materials, the bracket regulator is built to withstand the demands of regular use, offering durability and long-lasting performance. Installing the Lawn & Garden Engine Bracket Regulator is straightforward, allowing you to quickly replace any damaged or worn brackets and get your equipment back in working order with minimal downtime. By maintaining proper bracket alignment, this regulator helps prevent excessive wear and tear on your engine, ultimately extending the life of your lawn and garden equipment. Compatible with a wide range of lawn and garden engine models, this genuine OEM part guarantees seamless integration and dependable functionality. Choosing the Lawn & Garden Engine Bracket Regulator means investing in quality and reliability. Whether you're a professional landscaper or a DIY enthusiast, this bracket regulator provides the support your engine needs to perform efficiently and effectively, ensuring a better customer experience every time you work on your lawn and garden projects.

The Lawn & Garden Engine Service Back Cover is an essential component for maintaining the performance and longevity of your lawn and garden engine. This genuine OEM part ensures a precise fit and reliable protection, keeping your engine's vital components safe from dust, debris, and other environmental factors. Crafted from durable materials, the service back cover not only safeguards your engine but also enhances its overall functionality. By replacing a cracked, missing, or damaged cover with the Lawn & Garden Engine Service Back Cover, you can ensure your equipment operates smoothly and efficiently. This part is designed for easy installation, allowing you to perform repairs and maintenance with confidence. Compatible with a wide range of lawn and garden engine models, this genuine OEM part provides peace of mind by delivering the quality and performance you expect from Samsung. Invest in the Lawn & Garden Engine Service Back Cover to protect your engine and extend the life of your equipment, ensuring you can tackle your outdoor projects without interruption.

A dipstick is a part that is used to measure the amount of oil in various yard and garden equipment. It allows a person to reach an otherwise inaccessible space by inserting and then removing the dipstick. At that point, checking how much of the dipstick is covered in oil will let a person know whether it needs to be topped off. Over time, these tools can rust, break, or crack and will need to be replaced.Take a look at the dipstick for any damage before making a replacement of the part. If it needs to be replaced, it should be done while the lawnmower or other tool is cooled down. Unscrew the broken or damaged dipstick and take it out of the oil tank. Simply insert the new dipstick and screw it on before checking the oil level and using the machine again.This dipstick is a replacement part for Tecumseh, Cub Cadet, Toro, Briggs & Stratton, Troy-Bilt, Lawn-Boy, and Craftsman lawnmowers, wood chippers, and pressure washers. It comes as an individual component. It is a genuine OEM product that is sourced directly from the manufacturer.

The screw is used on various parts of lawn and garden equipment for various purposes. It is used to help fasten different pieces to one another. The screws ensure the machine is working properly, and it can help to reduce vibrations. The screws in the equipment may need to be replaced for any number of reasons. In some cases, they might have developed issues with the threads and no longer hold properly. They could have become corroded or they could have been lost when working on the engine. When there is an issue with the screw, it should be replaced right away. The authentic replacement screws are sold individually. They can be used with lawn mowers, snowblowers, log splitters, wood chippers, tillers, pressure washers, generators, and other small engines. The compatible brands include Briggs & Stratton, Craftsman, Toro, Cub Cadet, Tecumseh, Lawn-Boy, MTD, and Simplicity. When buying screws, owners need to get the correct size for their needs. It may be a good idea to have several extra screws on hand.

This is a Tecumseh repair manual that has instructions and tips about working with 4-cycle L-head engines in various types of lawn and garden equipment. This is an important component for anyone who plans to service, repair, or replace parts in any number of Tecumseh machines. It is a needed item for those who use lawn equipment with a specific kind of engine. Repair manuals can be damaged in many ways and experience water damage, holes, scratches, or torn pages. The repair manual can also go missing and a new one will be needed to read more about Tecumseh repairs.If a user has lost their Tecumseh repair manual or needs one because it was never provided, this version is what will give instructions for repairing and replacing different parts of the lawn and garden equipment components. The repair manual has extensive information about making repairs and will speed up any work that needs to be done.This Tecumseh repair manual is a genuine OEM replacement document that is directly sourced from the manufacturer. It is sold as an individual manual. This part can be used with lawnmowers and snowblowers from Tecumseh, Lawn-Boy, Craftsman, and Cub Cadet.