Parts for Mtd 13AI675H062: Deck "G" Assembly Parts

This muffler is a genuine MTD part, sold individually. This muffler can be used as a replacement part for a lawn mower or a lawn tractor. The purpose of a muffler is to quiet the engine.If the engine is particularly loud and the muffler appears to be rusted or otherwise damaged after a visual inspection, it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment.This is an OEM part sourced directly from the manufacturer. It is sold individually. This muffler is compatible with the following outdoor appliance brands: MTD, Yard Machines, and Ryobi.

This part is a hex cap screw that is used on a variety of outdoor power equipment. A hex cap screw is used to fasten components together securely. The head of the screw is shaped like a hexagon, hence the name "hex cap screw."A new hex cap screw may be needed if the current one is stripped, broken, or missing. Since screws are such a small component, it is important to place them in a safe place so that they are not lost. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This hex cap screw is a genuine Husqvarna part. It is sold individually. This particular hex cap screw is compatible with chippers, shredders, lawnmowers, lawn tractors, snowblowers, and vacuums that are manufactured by the following brands: Husqvarna, Craftsman, Bolens, Husky, Yard Machines, Yard-Man, MTD, and Troy-Bilt.

This hinge pin is a genuine MTD part, sold individually. This hinge pin can be used as a replacement part in lawn mowers, snowblowers, and chainsaws. This pin secures components within the equipment.The hinge pin in a small engine outdoor appliance might have to be completely replaced if the fastening component can no longer keep its associated components in place. This could occur if the hinge pin is lost, misplaced, or subject to stripping from general wear and tear over long-term use.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This hinge pin is compatible with the following outdoor appliance brands: MTD, Cub Cadet, and Yard Machines.

This is a replacement bell washer, a flat washer that can be used with a wide range of various types of lawn and garden equipment. The inner dimension of this washer is 0.40 inches, while the outer dimension is 0.88 inches. Washers are typically used as a way to help ensure a tight connection when used with bolts or screws. They will also help to distribute the pressure of the connection and reduce the risk of corrosion. Washers will also provide some protection from damage during installation. Washers could need to be replaced for any number of reasons. In some cases, they might have become corroded or worn down over time. This could mean they no longer provide a solid and secure connection. Other times, the washer could become lost while working on the machine. Owners should always be sure that they replace any lost or damaged washers right away. Not using washers can reduce the lifespan of the machine. This is a genuine OEM bell washer that is sold individually. It is typically used in lawn mowers, snowblowers, tillers, leaf blowers, string trimmers, log splitters, wood chippers, edgers, and chainsaws. It is compatible with Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut brands.

This spring washer has a conical shape with an open center. It has a shape like a traditional washer but is smaller than a typical coiled spring. These washers can handle a larger load than a coiled spring and are used in lawn and garden equipment to cushion heavy loads. Over time, these washers can experience wear and tear which will lead to damage or breakage. When this occurs, the spring washer will need to be replaced.Visually inspect the spring washer for damage like scratches, breaks, and dents. If these occur or the washer is warped, it needs to be replaced. The process involves removing the nut or screw above the washer with a screwdriver or other tool. After accessing the spring washer, it can be removed and a replacement part can be added to the equipment. Reassemble the parts and the equipment should work again.This is a genuine OEM spring washer replacement part that is sold individually. It's sourced directly from the manufacturer. It is compatible with lawnmowers, wood chippers, snowblowers, log splitters, tillers, chainsaws, string trimmers, and edgers by Craftsman, MasterCut, Toro, Turf King, Cub Cadet, Yard-Man, Ryobi, Bolens, Husky, Montgomery Wards, Murray, Huskee, Yard Machines, and MTD.

The nut-hex flange 5/8-18 features a hex nut with a wide flanged portion at one end. This flange will act as an integrated washer that does not spin. Since the flange acts as a washer, it ensures that the nut can fasten to the material's surface evenly. If any of these nuts are removed from a machine to do other work, it is recommended to replace them with a new nut-hex flange. Check the nuts that are currently on the machine at least once a year. Make sure they are properly tightened and that they are in good condition. Replace them as needed. This OEM part will work for many types of equipment, including lawnmowers, edgers, snowblowers, and lawn tractors. The part will work with many brands, including Ryobi, Poulan, Bolens, Yard-Man, MTD, Yard Machines, and Troy-Bilt.

This replacement part is a pulley. This is a genuine replacement part made by MTD. This part is able to connect multiple pieces together so they can operate smoothly during use. This enables certain parts to work together and run smoothly and effectively over time.A new pulley might be needed if the current one has become worn down or damaged. Pulleys typically experience a large amount of friction during use and can eventually begin to malfunction. If the user notices unusual noises coming from the inside of the machine, it can be due to a pulley that needs attention. Work gloves are recommended during this repair to ensure safety. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This replacement part is a torsion spring. This is a genuine replacement part made by MTD. This particular spring is found in riding lawnmowers and is responsible for connecting and controlling different parts within the engine.A new spring might be needed if the current spring is missing. If the spring is snapped it should also be replaced as soon as possible. The repair for this part should be fairly simple and only require common household tools. Be sure to wear work gloves during this repair to prevent injury. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit.

This hex screw is a genuine MTD part. It is a replacement part for lawn tractors, edgers, lawn mowers, snow blowers, tillers, string trimmers, chainsaws, log splitters, and wood chippers. It is a standard-sized part and it may be compatible with other machines as well.This particular screw is a one-inch metal screw and may be found in various places on the pieces of equipment. Refer to a parts diagram to find out where it is used on the equipment.This hex screw is a genuine OEM part sourced directly from the manufacturer. It is sold individually. Most machines have multiple screws; check others to see if more need replacement. It is compatible with several makes, including but not limited to Bolens, MTD, Troy-Bilt, Yard-Man, Yard Machines, Ryobi, Husky, Cub Cadet, Montgomery Ward, MasterCut, Turf King, and more.

The lock nut is a piece of standard hardware that may have a variety of applications on lawn and garden equipment, including on engines, housings, and other components. The lock nut offers a secure fit by tightening into a flange that prevents the nut from loosening like a regular nut might. Over time, the flange or the nut can become worn or damaged. In some cases, lock nuts may be lost during the process of other repairs or maintenance. Replacing them with genuine OEM parts like this lock nut is the best solution. This lock nut is compatible with hundreds of machines, including mowers, snowblowers, and chippers from MTD, Troy-Bilt, Cub Cadet, RYOBI, Yard-Man, Yard Machines, Bolens, and Husky. The ¼-inch lock nut has multiple locations and applications, so owners should consult their parts diagram for exact placement and part number identification. This lock nut is made of durable metal and sold as a single unit. Those who need additional pieces will have to order multiple quantities. This part will require a wrench or a socket to replace, as well as pliers and/or a screwdriver to hold the bolt or screw in place.

This replacement part is a headlight harness. This is a genuine replacement part made by MTD. This particular harness is made up of different wires and is responsible for connecting certain parts together so that the headlights are able to turn on and off according to the user's preferences. A new headlight harness might be needed if the current harness is unable to stay attached or is damaged in any way. After years of normal wear and tear the wires in the harness might have become stripped and should be replaced if this is the case. If the headlight is not turning on when the switch is working, it might be a faulty harness. Be sure the engine is completely powered down before attempting to repair this specific part.This headlight harness is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part.