Parts for Mtd 24A-021H700: Deck / Impeller / Nozzle Parts

This replacement part is a wire harness assembly. It is a genuine replacement part made by MTD. This wire harness assembly is used in many different types of machines and aids in connecting different parts so that the appliance runs smoothly and effectively. A new wire harness assembly might be needed if the user notices that the current wires are stripped or detached. This can be because of normal wear and tear and is common after years of use. Be sure to wear work gloves when replacing this part as the wires can be harmful when handled. It's also recommended that the user refer to the proper owner's manual before attempting to replace this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

A flange nut's unique wide flange design distributes the nut's pressure over the part it is securing. In return, it creates an even fastening surface, which reduces part damage and nut loosening. This one-piece all-metal fastener has a lock nut version that features a protruding circular flange. This drastically increases bearing surface, compatibility either for irregular or oversized holes, and surface tension reduction. Flange lock nuts are the preferred type of fastener for many lawnmower models because it can provide better fastening than regular screws, which are known to loosen under extreme vibration. However, it’s important to know that flange lock nuts are susceptible to wear and tear due to constant vibration exposure. It is essential to replace the broken flange lock nut immediately to prevent serious damage to the lawnmower. The MTD 712-04063 Flange Lock Nut OEM replacement can be used with Craftsman, White Outdoor, Yard Machines, MTD, or Columbia lawnmowers. It is a genuine or OEM MTD replacement part that measures 5/16-18. It is threaded and requires the use of a wrench. This replacement flange lock nut is sold individually. An MTD bolt carriage may also be needed and is sold separately.

This is a chipper blade, which is installed on wood chippers and is used for cutting up pieces of wood into small chunks. Chipper blades need to be sharpened at least once a year or after about 25 hours of use. If the chipper blades aren't maintained, they will become dull and won't provide the required level of cutting power needed for wood chippers. If wood chips from the chipper are uneven, shredded, or rough, then sharpening or replacement may be needed. Make sure to take out the spark plug before the hopper is removed and connected to the tool. Next, remove the housing around the blades and the rotor assembly. The bolts around the blades can be taken off using an Allen wrench. Remove the blades, but be sure that work gloves are used to prevent injury. The replacement blade can be installed at this time. This is an OEM replacement chipper blade that can be used on wood chippers from Craftsman, MasterCut, Cub Cadet, Yard-Man, Yard Machines, and MTD. It's sold individually and comes directly from the manufacturer. The replacement will require an Allen wrench set, a wrench set, a socket set, and pliers.

This lock washer is used frequently for a number of applications on power yard equipment. The size, 5/16, is the default for many small engine housing and manifold applications. Lock washers are used with machined bolts to fasten engine blocks to the housing of the equipment being used. The compressed washer is able to handle the constant vibration of the small gasoline engine without losing the seal between the screw or bolt and the housing. Typically these lock washers only need to be replaced when they are misplaced during repairs or when the screws that attach them have to be chiseled or cut away, meaning the washers are destroyed as well. These OEM certified replacement washers have been manufactured to the same specifications as the originals they are replacing. In addition to lawn mowers, lock washers of this type and size are frequently used on blowers, lawn tractors, cultivators, snowblowers, and trimmers. Brands compatible with this type of washer are Murray, Husky, Poulan, Bolens, Yard-Man, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and Ryobi.

This is a genuine OEM replacement pin commonly found in chippers and shredders. This pin is part of a larger clevis pin and helps secure the larger pin into an engine. Clevis pins are inexpensive metal fasteners that connect parts without having to thread into the body of another part. They have a three-part construction consisting of the clevis, a pin, and a tang. This part is the pin that fasteners the clevis. The most likely reason why this pin would need replacing is if it fell out while the engine was running. Engines produce enough heat to cause parts to expand, and it is possible that a clevis could have expanded and the pin fell out. Should this happen, the clevis will no long fasten, and the pin will need to be replaced. Clevises are found in multiple places throughout an engine, so be sure to follow the user's manual to identify the right part. This pin is compatible with MTD, Huskee, Bolens, and Troy-Bilt clevises and comes sourced from the original manufacturer. This pin does not include a replacement clevis. It ships individually.

This washer is a genuine MTD replacement part for lawn and garden appliances that are operated by small engines, such as lawn tractors, snowblowers, chipper shredders, leaf blowers, and lawn mowers. The purpose of a washer is to protect and insulate nuts, bolts, and other types of fasteners, preventing these fasteners from gradually loosening. A washer will have to be replaced in the event that it is lost or misplaced, a common occurrence given its extremely small size and its ability to slide off without calling any attention to its absence. Other reasons to replace a washer could include general wear and tear or visible damage in the form of erosion, bending, or cracking metal as a result of overuse or overexposure. If a washer is subject to any of this kind of damage, it should be replaced immediately to avoid nuts and bolts coming loose and separating the materials that they protect and hold together. Remember that gloves must always be worn when handling, repairing, and operating outdoor equipment. This washer part is compatible with the brands MTD, Yard Machines, Cub Cadet, and Yard Man.

The shoulder screw is used in places where a spacer or bearing surface is needed, since the top half of the screw is unthreaded. These fasteners are often used for guides, pivot points, mounting pins, axles, and even a shaft for bearings and bushings in various MTD engines. With regular use, the screws can wear down or be lost. Always repair the missing hardware promptly with genuine OEM replacements. Disengage the spark plug and wear gloves when performing work on engines for safety. This genuine OEM replacement shoulder screw has been designed to be compatible with machines from MTD, Troy-Bilt, Yard-Man, Yard Machines, Bolens, Cub Cadet, and Craftsman. It can be used for multiple applications and in multiple locations in different models of lawnmowers, tractors, and chippers that use the screw in various applications. Check your parts diagrams for the exact location and use of these screws before ordering. This is sold as an individual unit; order multiple quantities as needed.

This vacuum impeller is a genuine MTD part, sold individually. This vacuum impeller can be used as a replacement part in a lawn mower or a wood chipper. The purpose of a vacuum impeller in a lawn mower or a wood chipper is to spin at a high enough speed to generate air flow so that the vacuum of the appliance can draw in or push out pressurized air, a crucial feature of both a lawn mower and a wood chipper.The vacuum impeller in a lawn mower or a wood chipper might need to be replaced if the vacuum impeller suffers too much damage to serve its typical function. If the vacuum impeller cannot rotate at a high enough speed due to reduced functionality or cannot spin at all due to potential damage to the component, the vacuum impeller should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This vacuum impeller is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, and Yard Machines.