Parts for Mtd 1417A3ZW099: Deck / Spindle Parts

Uneven cut or blade won't engage? This spindle assembly connects the deck to cutting blades. Direct fit for most MTD riding mowers and tractors.

Replace your cracked or damaged 54-inch mower deck shell. This structural chassis component protects internal components and restores deck integrity.

Replace a faulty reverse wire harness if your lawn tractor won't go in reverse or has no warning beep. Fixes electrical issues in reverse function.

Hex cap screw for lawn tractors and riding mowers. Secures components together. Replace if stripped, missing, or damaged from impact or wear.

Hex head cap screw for riding mower and lawn tractor assembly. Replace missing, stripped, or damaged fasteners to secure components properly.

Oil draining slowly or leaking during changes? This oil drain valve ensures quick, clean oil changes on your lawn mower. Simple DIY install in minutes.

Hex cap screw secures components on lawn tractors, tillers, snowblowers, and garden equipment. Replace if broken, stripped, or missing.

This OEM screw is a fastener with a trimmed six-sided or hexagonal head plus a washer face on the bearing surface. It is one of the most commonly used fasteners. Considered standard hardware, this component has multiple applications and can be used on woodworking, machine assembly, and mechanical repair. The screw is 3/4 long and has a thread size of 5/16 -18. A hex cap screw is installed into tapped holes by turning the head to fit and tighten. This is the fastener of choice in applications where tight tolerance is necessary. This is a genuine factory part sourced from the manufacturer and is sold individually. It can be used with Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut brands of lawn maintenance equipment including lawn mowers, snowblowers, tillers, leaf blowers, log splitters, and wood chippers.

Hydraulic fitting adapter for lawn tractors and riding mowers. Connects hydraulic lines in the transmission system. Replace if cracked, leaking, or stripped.

This replacement part is a screw. This is a genuine replacement part made by MTD. Screws are small but important to the overall workings of many appliances. Screws work with other small pieces such as nuts and washers to keep parts secure during use.A new screw might be needed if the current one is missing or damaged. This can be caused by normal wear and tear with years of use. Screws endure large amounts of friction over time and can become worn down. If this is the case, be sure the replace the part as it might not be as effective as normal. Refer to the user manual for specific directions on the replacement of this part. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

Flange lock nut secures components on mowers and outdoor power equipment. Replace if stripped, corroded, or missing to restore proper fastening.

Replaces a stripped, damaged, or missing 5/8" hex flange nut on your lawn mower or snow thrower. Secures blades and other components with integrated washer.

This flange lock nut is a metal component used in many types of lawn and garden equipment. It is the part that attaches to the rear wheel to keep it steady on any kind of terrain. It can also be used on handles and chutes for some equipment. The nut size is 3/8 and it has a thread size of 16. Most flange lock nuts will last for years. In some cases, the silicone ring inside the nut will wear down when it is loosened and tightened. When this happens, the flange lock nut will start to move around. It can start as minor slippage but often gets worse over time. It will need to be replaced but this is a simple task. Regardless of what equipment it is attached to, it simply needs to be unscrewed. Take off the old nut and replace it with the new one. This flange lock nut is an authentic OEM product that is sourced directly from the manufacturer. It is sold individually. The lock nut is made for use with lawnmowers, wood chippers, and edgers manufactured by MasterCut, Yard-Man, Bolens, Craftsman, Cub Cadet, Murray, Troy-Bilt, Yard Machines, MTD, and Huskee.

Bow tie cotter pin secures components on lawn tractors and riding mowers. Replace if bent, missing, or worn to ensure proper fastening of parts.

This genuine OEM replacement part is a push cap designed for snowblower, tiller, and edger wheel assemblies. A push cap is a special type of nut, or fastener, that helps to hold unthreaded shafts in place. Although small, this push cap helps to secure the wheel to the axle. Push caps are most commonly damaged if the operator uses their appliance in rough terrain. If damaged, it can fall off, causing the wheel to also fall off. Replacing push caps is an easy repair as they attach to the outside of the wheel assembly. The only hardware required to make this repair is a nut driver. If you do not have a nut driver, a pair of pliers can also be used to attach the new push cap. This part is a high-quality replacement part meant for Yard Man, Husky, Ryobi, Yard Machines, Troy-Bilt, MTD, Bolens, and Cub Cadet appliances. It is sourced direct from its original manufacturer and ships individually.

3/8-16 threaded rivet nut for lawn tractors. Provides secure threaded mounting in sheet metal panels. Replace when stripped, corroded, or missing.

Replacement deck roller for lawn mowers and tractors. Guides deck height adjustment over uneven terrain. Replace if cracked, worn, or missing.

Replace a damaged or missing spindle cover that no longer protects the spindle from debris or shields users from moving parts. Simple installation.

Protective cover for the spindle assembly on lawn tractors and riding mowers. Replace if cracked, broken, or missing to shield the spindle pocket.

Replacement blade idler spring for riding mowers and lawn tractors. Maintains proper blade engagement tension. Replace if worn or broken. Verify fit.

Replace your lawn mower's deck bearing shield if cracked, broken, or missing. This protective cover installs on the mower deck to shield bearings from debris.

Fastening screw for lawn mowers and tractors. Secures components throughout the equipment. Replace if stripped, broken, or missing during repairs.

This is a shoulder spacer replacement for use with lawn tractors. The shoulder spacer will attach to the deck brake assembly using a hex cap screw. This part can have different applications depending on the type of equipment for which it is being used.The metal spacer is durable, but it could still have some issues. Over time, it could become worn down or corroded and need to be replaced. It could also be lost when working on other parts of the machine and need to be replaced. The repair should be done with gloves so owners can protect their hands.The shoulder spacer is a replacement for select models of lawn tractors from Husky, Troy-Bilt, and MTD. This is a genuine OEM replacement part that has been sourced directly from the manufacturer. The spacer is sold individually.

Uneven cuts or excessive grass clumping? This lawn tractor blade restores cutting performance. Compatible with front and rear-engine riding mowers.

Replacement spring rod for lawn tractors and riding mowers. Replace your broken, bent, or missing spring rod to restore proper linkage operation.

Shoulder spacer for lawn tractors and riding mowers. Installs between engine components to maintain proper alignment. Replace if cracked or missing.

This v-belt is a genuine MTD part, sold individually. This v-belt can be used as a replacement part for a lawn mower. The purpose of the v-belt is to facilitate the powering of the transmission by channeling the energy so the appliance can be properly steered and operated.The v-belt of a lawn mower might have to be replaced if the component suffers damage that prevents it from operating normally. The v-belt might be punctured, torn, scraped, cracked, or eroded to the point that its position is knocked off balance or that it cannot rotate around its usual axis. If this occurs and cannot be fixed by a simple repair, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This v-belt is compatible with the following outdoor appliance brands: MTD and Craftsman.

This part is a replacement idler pulley. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a defective or broken idler pulley in a variety of lawn tractor models. Idler pulleys help to guide the engine's drive belt. This part is subject to significant wear and tear over time and may require replacement. Signs that the idler pulley might need replacing include a squealing sound coming from the belt or the pulley being visibly worn. Proper tools are required to install this part. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this idler pulley, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this idler pulley is suitable for use on several different models of lawn tractors manufactured by MTD, Troy-Bilt, Yard Machines, Cub Cadet, Husky, and Yard Man. This is a genuine part made of high-quality, durable materials and is sold individually.

Idler pivot bracket for lawn tractors and riding mowers. Mounts the idler pulley system to the deck. Replace if cracked, bent, or broken to restore proper belt alignment.

Secures and protects the idler pulley on lawn tractors and riding mowers. Replace if cracked, loose, or missing to maintain proper belt tension.

Nozzle adapter for lawn tractors and riding mowers. Connects hoses or tubes in the fuel or deck wash system. Replace if cracked, stripped, or missing.

5-inch diameter deck roller wheel for lawn tractors and riding mowers. Replaces cracked, worn, or missing deck wheels that support smooth cutting deck operation.

Shoulder bolt for riding mowers and lawn tractors. Used as an axle for wheels and deck components. Replace if bent, worn, or stripped from regular use.

Discharge chute assembly for lawn tractors. Directs grass clippings and debris away from the deck. Replace if cracked, broken, or detached. Fits MTD models.

Torsion spring for lawn tractors and riding mowers. Replaces broken, worn, or missing springs in deck lift or blade engagement systems.

Hinge pin that secures the discharge chute to your mower deck. Replace if pin is lost, broken, or bent. Essential hardware for proper chute operation.

Deflector chute mounting bracket for lawn tractors and riding mowers. Replace this bracket if cracked, bent, or broken to properly secure the discharge chute.

Hex cap screw fastener for outdoor power equipment. Secures components with hexagon-shaped head. Replace if stripped, broken, or missing threads.

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

Fix wobbling mower blades with this spindle shaft. Common repair for uneven cuts and blade vibration. Moderate DIY with socket set and hammer.

A ball bearing is a common type of rolling-element bearing. It will use balls to keep space between the bearing races and eliminate friction and contact between moving parts. Ball bearings used in lawn and garden equipment ensure that axial loads and radial loads are evenly supported and that there is only a limited amount of rotational friction on the component. It distributes weight evenly, but will undergo constant wear and tear from vibration, heat, and friction and will need replacement regularly. This ball bearing is a genuine OEM part suited to use in Craftsman, Cub Cadet, Ryobi, Troy-Bilt, MTD, Huskee, Yard Machines, Bolens, Mastercut, and Yard-Man equipment. It may be needed for repair work done on a lawnmower, snowblower, tiller, edger, or a log splitter.

Replace a worn spindle pulley causing uneven cuts or blade engagement issues on your riding mower. Direct-fit replacement part for reliable performance.

Spacer that attaches to the idler arm on lawn tractors, creating a smooth surface for proper movement. Replace if worn, cracked, or missing.

Lost or broken push cap preventing setting adjustments? This small but essential control cap restores proper function on mowers and tractors. Quick fix.