Parts for Cub Cadet E977C: Deck / Wheels / Chute / Handle Parts

Replace a broken or worn control handle on your walk-behind mower. This bail control bar installs on the upper handle and must be squeezed to operate.

Secures handle controls to the upper handle of your walk-behind mower. Replace this plastic housing kit if cracked, broken, or worn from outdoor use.

Control lever won't stay engaged or releases unexpectedly? This lawn mower latch secures the control lever in position. Quick DIY fix in 15 minutes.

Mower won't shift speeds or self-propel won't engage? This tooth rack gear insert transfers rotational motion to linear movement. DIY repair in 30 minutes.

Secures handle controls to the upper handle of your walk-behind mower. Replace this plastic housing kit if cracked, broken, or worn from outdoor use.

Countersunk Phillips head screw for lawn mowers and snow throwers. Replaces lost, stripped, or damaged screws. Used to secure various panels.

Secures handle controls to the upper handle of your walk-behind mower. Replace this plastic housing kit if cracked, broken, or worn from outdoor use.

Mower won't move forward when self-propel engaged? This drive cable connects the handle control to the transmission. Straightforward repair.

Nylon nut for lawn equipment. Secures and connects components throughout the machine. Replace if cracked, stripped, or missing for proper assembly.

Fix a mower that won't start or has loose throttle cable control with a new throttle housing. This plastic grip component secures the throttle cable.

Star knob connects upper and lower handles on lawn mowers and outdoor equipment. Replace if threading is worn, cracked, or knob is missing for secure assembly.

Curved head carriage screw secures upper and lower handles on lawn mowers and garden equipment. Replace if damaged, missing, or no longer holding handles.

7-inch plastic cable tie secures cables to lawn mower or tiller handles. Replace when cracked, broken, or worn to keep cables properly fastened.

Replacement rear skirt for lawn mowers. Protects user from grass clippings and debris. Replace if cracked, broken, or detached for safe operation.

Protective trailshield that attaches to the back of your lawn mower deck. Replace if torn, dented, loose, or missing to maintain safe operation.

Replace your broken or missing lawn mower discharge chute assembly. Directs grass clippings away from the mower deck during operation. Essential part.

Replace your lawn mower's cracked or broken 21-inch top discharge chute. Directs grass clippings away from the deck during mowing operations.

Replace your cracked or missing lawn mower mulch cover. This protective plate installs on the deck to shield internal components and users from debris.

Replace your cracked or damaged 21-inch mower deck assembly. This structural component houses the blade and cutting system on self-propelled mowers.

Secures the front baffle to the mower deck. Replace this wing nut if it's cracked, stripped, missing, or no longer holds components firmly in place.

Carriage bolt for lawn mowers and outdoor power equipment. Fastens components together with a nut. Replace if lost, stripped, or damaged during repair.

Fix inconsistent mower speed or unresponsive throttle control with this cable pulley. Controls machine speed throughout operation. Simple repair.

Replace worn spring bell washers causing loose parts or rattling noises. This conical washer cushions heavy loads in lawn equipment. Simple DIY fix.

Loose or wobbly mower handle? This 1/4" carriage bolt secures handles to the mower base. Self-locking design for outdoor equipment durability.

Roller cable guide for lawn mowers. Supports and routes control cables. Replace if worn, broken, or missing to restore proper cable alignment.

Replace a missing, stripped, or damaged 1/4-28 x .32 screw on your snowblower. Secures housing panels and covers for proper equipment assembly.

Bowed washer for lawn mowers and tractors. Installs in fastening mechanisms to reduce friction. Replace if worn, damaged, or missing from assembly.

Replacement rear wheel for walk-behind and self-propelled mowers. Restores maneuverability when original wheel is cracked, damaged, or worn out.

Replacement fastener for lawn mowers and tractors. Secures components and panels in place. Order a new fastener if yours is stripped, missing, or damaged.

Bearing for lawn mowers and chippers. Replace when you notice grinding noise, rough rotation, or vibration. Confirm fit with your model number.

Replace your lawn mower's starter pawl when the engine fails to turn over. This pawl locks onto the flywheel to start the engine. Verify fit with your model.

Ratchet wheel for lawn mowers. Installs in the drive mechanism to enable continuous motion in one direction. Replace if cracked, worn, or damaged.

Hex cap screw fastener for outdoor power equipment. Secures components with hexagon-shaped head. Replace if stripped, broken, or missing threads.

Replace your cracked or missing lawn mower wheel hub cap. This beige cover protects the wheel hub assembly from dirt and debris while maintaining a clean appearance.

Shield mounting screw for lawn mowers and tillers. Secures protective shields and covers to the mower deck. Replace if screw is stripped, missing, or damaged.

Wave washer helps secure fasteners and improve operation on lawn mowers and walk-behind equipment. Direct fit replacement part for push and self-propelled models.

Flat bell washer for lawn mowers and garden equipment. Replaces worn, missing, or damaged washers. Inner diameter 0.40", outer diameter 0.88".

Secures motor to equipment housing on lawn mowers and small engines. Includes lock washer. 3/8-16 x 1" dimensions. Replace when damaged or stripped.

Flat washer flange for lawn mowers, snow throwers, tillers, and edgers. Replace when washer is missing, damaged, or worn to ensure proper assembly.

Self-tapping screw for lawn mowers and outdoor power equipment. Replace if stripped, missing, or damaged during maintenance or repairs. Standard fastener.

Fix lawn mower vibration or loose components with this block bushing. Facilitates smooth rotational movement and secures internal machinery. Easy DIY fix.

Hex washer head screw for lawn mowers and snow blowers. Replace worn, stripped, or missing fasteners on deck, housing, or engine components.

Protective housing cover for walk-behind mower front axle. Shields axle from dirt and debris. Replace if cracked, broken, or missing for proper protection.

Drive belt transfers power from engine to wheels and deck on walk-behind mowers. Replace if worn, cracked, or slipping. Confirm fit with your model number.

Drive pulley assembly for lawn mowers. Transfers power from the engine to the wheels for self-propulsion. Replace if worn or damaged. Verify fit.

Spacer sleeve for lawn mower assembly. Replaces worn, damaged, or missing sleeves. Maintains proper spacing between components during operation.

Pivot bracket for lawn mowers. Mounts to the mower deck or frame to support moving components. Replace if cracked, bent, or broken to restore stability.

Can't shift speeds smoothly on your mower? This 6-speed control arm restores precise gear selection. Compatible with walk-behind and self-propelled models.

Loose or missing hardware causing vibration or rattling? This washer provides proper spacing and secure fastening for engine components. Easy fix.

Rear baffle for 21-inch lawn mowers. Directs grass clippings and airflow for optimal cutting performance. Verify fit with your model number.

Blade adapter kit for lawn mowers. Connects the cutting blade to the engine crankshaft. Replace if cracked, stripped, or worn to restore secure blade mounting.

Replaces worn, dull, or damaged 21-inch mulching blades on walk-behind mowers. Features curved design for effective mulching. Upgrade your rusty blade.

Metal blade support spacer that mounts between the mower blade and bolt. Secures the blade to the deck base. Replace if worn, damaged, or missing.

Hex screw fastener for lawn mower and lawn tractor small engines. Secures components together. Replace if lost, stripped, or corroded during maintenance.

Replace your broken or missing lawn mower discharge chute assembly. Directs grass clippings away from the mower deck during operation. Essential part.