Parts for Ge CXE22DP3PDD1: Dispenser Door Parts

This gray articulating mullion provides the center trim and hinge assembly that lets French-door or side-by-side refrigerator doors pivot and seal properly. Restores door alignment and helps the doors close evenly for a better seal. What it does:

• Replaces the center mullion that connects and supports the door edges for proper closing
• Restores hinge movement so doors open and close smoothly without binding
• Helps improve door seal alignment to reduce cold air loss from the cabinet
• Commonly used when the mullion or hinge is cracked, loose, or bent

• One gray articulating mullion assembly with hinge components as shown

• High-level replacement; remove power to the appliance before starting
• Support both doors during removal/installation to avoid dropping or damaging doors
• Use appropriate tools and follow OEM diagram for hinge screw locations and torque

A left-hand closure door assembly that replaces a worn or broken door closure to restore proper sealing and smooth drawer/door operation. Helps stop drafts and keeps compartments closing correctly for reliable performance. What it does

• Guides and supports the left-side door/drawer as it closes to ensure proper alignment.
• Helps form a tight seal to reduce air leakage and maintain interior temperature.
• Prevents rattling or catching that can occur when the closure is damaged or worn.
• Commonly replaced when the door doesn't stay closed, binds, or leaves a visible gap.

• Disconnect power to the appliance before starting any repair.
• Basic hand tools are typically required; access may involve removing a drawer or trim panel.
• Handle parts carefully to avoid damaging surrounding panels or gaskets.

The Fastener Door Handle is an OEM component for GE refrigerators. This door handle provides a comfortable grip for accessing refrigerator shelves and bins. It attaches securely to the refrigerator door through durable metal fasteners. 

Causes for a bad door handle could be cracks, damage, or stripped fastener holes resulting in a loose or detached handle. Regularly gripping and lifting may also cause normal wear over time.

Symptoms of a failing door handle include:

• The handle detaching completely from the door  
• Looseness making the handle wobbly or unstable to hold
• Sharp edges or broken parts posing a safety risk

This OEM GE handle is also compatible with Hotpoint, RCA, and select Kenmore refrigerator models.

This set screw secures refrigerator components—most commonly door handles—to their mounting studs. Replacing a missing or stripped screw restores a solid, secure feel and helps prevent loose or wobbly handles.

• Locks the handle to its mounting stud to keep it tight and secure
• Helps resolve a loose, wobbly, sliding, or rattling handle
• Replaces a missing, rounded, or damaged set screw
• Helps maintain proper handle alignment and consistent door operation

• Unplug the appliance or switch off power before servicing
• Ensure the handle is fully seated on the studs before tightening
• Start the screw by hand to avoid cross-threading; then tighten until snug
• Do not overtighten to prevent stripping the screw or handle threads

This tinted upper left refrigerator door bin replaces a cracked, faded or missing shelf so small items stay secure on the door and the interior keeps a clean look. Durable molded plastic matches factory appearance. What it does:

• Provides a storage shelf for condiments, bottles and small items on the upper-left refrigerator door
• Restores proper retention and prevents items from falling when the door is opened or closed
• Replaces bins that are cracked, warped or discolored from age or impact
• Matches the factory tinted finish to help keep contents less visible and maintain original styling

• One tinted upper left door bin as shown

• Typically snaps into the door liner grooves; remove contents and lift old bin straight out
• Inspect door rail clips for damage and replace if necessary before installing new bin
• Clean mounting area and line up the bin tabs, then press firmly until it snaps into place
• Handle edges carefully to avoid cuts; unplug appliance or remove power if working near electrical components

This tinted center-left door bin replaces a cracked or faded refrigerator door shelf to restore secure storage and a consistent interior appearance. Fits in the center-left position of compatible refrigerator doors. What it does

• Provides a dedicated shelf for bottles, jars, and small containers on the center-left door.
• Replaces damaged, cracked, or discolored bins that can no longer hold items securely.
• Restores proper fit and helps prevent items from falling when the door is opened or closed.
• Tinted finish reduces the appearance of stains and helps hide minor scratches.

• Remove all items from the door and support the bin while releasing any retaining clips or rails.
• Usually snaps into place; align tabs and press until secure. Do not force broken tabs.
• Inspect adjacent door rails and clips and replace if worn to ensure proper fit.
• Disconnect power only if required for broader repair—no electrical work is typically needed for bin replacement.

This tinted lower left door bin replaces the refrigerator's lower-left storage shelf, restoring a secure spot for bottles and containers and improving fridge organization. The tinted finish matches factory styling and helps hide contents. What it does:

• Provides a dedicated lower-left shelf on the refrigerator door to hold bottles, jars and small containers
• Keeps items secure and prevents them from falling when the door is opened or closed
• Tinted material offers a coordinated look and reduces visible clutter on the door
• Fits into the door bin rail system and functions like the original factory bin

• Install by sliding the bin into the door bin rails until it snaps into place
• Handle with care to avoid chipping or cracking the plastic during installation
• Disconnect power and remove food items from nearby shelves if you need to tilt or remove door components for access
• If the bin does not seat properly, reinstall to avoid damage

The Duct Door Motor is an OEM replacement part for GE refrigerators. It is designed to control the opening and closing of the dispenser door, allowing for the release of ice from the dispenser.

A bad dispenser duct door motor can occur due to various factors, including normal wear and tear, motor failure, or damage to the motor mechanism. If you notice symptoms such as the dispenser duct door not opening or closing properly, or failure to dispense ice or water, it may indicate a need to replace the dispenser duct door motor.

Symptoms of a bad dispenser duct door motor include:

• Dispenser duct door not opening or closing properly
• Failure to dispense ice or water

Restore your refrigerator's dispenser system by replacing the faulty dispenser duct door motor with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This duct door spring secures and returns the exhaust/vent door so airflow opens and closes properly, helping maintain correct ventilation. Replaces a worn or broken spring to restore normal vent operation and reduce drafts. What it does

• Provides tension to the exhaust/duct door so it opens when ventilation starts and closes when idle.
• Restores proper airflow control when the vent door fails to stay open.
• Helps prevent backdrafts and reduces unwanted air exchange when the appliance is off.
• Common symptom: vent/duct door hangs open, won't latch, or won't return to closed position.

• One duct door spring

• Disconnect power to the appliance before starting any repair.
• Access may require removing the vent/duct door assembly or outer access panel; keep track of fasteners.
• Use caution when handling springs — they may be under tension; wear eye protection and gloves.

This door board is the electronic control module that mounts in the refrigerator door to manage dispenser and door-mounted functions, restoring responsive controls and display feedback. What it does

• Receives user input from the dispenser/door control panel and sends signals to the main control
• Controls dispenser motor/solenoid and display/LED indicators for door functions
• Helps resolve symptoms like unresponsive dispenser buttons, incorrect door display messages, or intermittent door control behavior
• Works with door-mounted sensors and switches to coordinate dispensing and user commands

• One door board (electronic door control) as shown

• Disconnect power at the appliance or breaker before starting to avoid shock
• Remove interior door panel or dispenser bezel carefully to access the board and wiring harness
• Note connector locations and orientation; disconnect harnesses gently and avoid pulling on wires
• Handle the board by edges and avoid electrostatic discharge—use a grounded strap if available

The Stainless Drip Tray Cover is an OEM part for GE side by side refrigerators. It serves as the cover for the bottom drip tray in the refrigerator, allowing any spills or condensation to properly drain away while also keeping the drain area clean and hygienic. 

Causes of a bad drip tray cover can include wear and tear from repeated cleaning, damage from impact or excessive weight, or warping due to moisture. 

Symptoms of a bad drip tray cover include:

• Leaks or drips from the bottom of the refrigerator  
• An unpleasant musty smell 
• Accessible drainage area allowing for mildew or bacteria growth

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This selector control provides the hi/lo switching function for the oven/range heating circuit, restoring user control over high and low heat settings. It replaces a failed selector so the range can select the proper heat level reliably. What it does:

• Switches between high and low heat settings for the heating element or burner
• Restores control when heat setting changes do not respond or stick
• Helps eliminate intermittent or no-heat conditions caused by a worn selector
• Matches OEM function and mounting for a direct replacement

• One selector control assembly as shown

• Disconnect power to the appliance before starting any repair
• Handle electrical connections carefully; note wire locations or take a photo before removal
• Use basic hand tools; do not force connectors or mounting tabs