Dixon Chainsaw Parts

This replacement part is a seat switch. It allows the user to control the settings on the seat in many kinds of lawn tractors. This ensures a comfortable user experience during any job. A new seat switch might be needed if the user is no longer able to control or adjust the seat on the lawn mower. This can be due to normal wear and tear, and it is not unusual for this part to wear out after years of use.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This is a replacement lawn tractor shield-deflector. The shield-deflector, or grass chute, is made from strong, high-quality plastic and attaches to the lawn tractor deck's side. Its purpose is to direct grass clippings and other debris away from the rider while mowing. Over time, the original shield-deflector can become worn and damaged, allowing debris to blow up onto the lawn tractor driver. Debris expelled from the lawn tractor can cause property damage, injury, or even death. Ensure the area is always clear of bystanders while mowing and consult the operator's manual to ensure proper installation of all replacement parts.This shield-deflector is designed to be a replacement for original worn or damaged shield-deflectors on AYP, Jonsered, Redmax, Craftsman, Poulan, Husqvarna, Poulan Pro, Weed Eater, and McCulloch 46-inch lawn tractor decks. This replacement shield-deflector is an OEM part that is sourced directly from the manufacturer. The shield-deflector is sold individually and does not come with hardware included. Tools needed for replacement may consist of; 1/2 inch socket, 7/16 inch socket, vise-grip pliers, a large flat-head screwdriver, and a hammer.

This replacement part is a spring. Springs create torque and ensure that components remain secure during equipment use.Due to the amount of pressure they experience during use, springs can snap over time. If a spring has become loose and no longer holds enough tension, it should be replaced.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This replacement part is a grip handle. This is a genuine replacement part made by Husqvarna. This grip handle allows the user to have a stronger and more secure grip while maneuvering the machine to the desired areas. A new grip handle might be needed if the current one is missing or damaged. If the handle is not up to working condition it might not feel comfortable to hold. This might mean that the user will not be able to maneuver the machine. If this is the case the grip handle should be replaced as soon as possible. The repair should be fairly easy and only require common household tools. This grip handle is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This is a genuine replacement for the oil drain valve on select Husqvarna engines. The oil drain valve is connected to the oil pan and the drain, assisting with draining oil from the engine. As the oil passes through the drain valve, it can cause residue to build up over time. This is a metal part, but it can become damaged in many ways. The valve seals could become worn or faulty, creating leaks. In the event that it is no longer functioning, a replacement valve may be required. This OEM part will provide an exact fit for compatible engines. This genuine oil drain valve is manufactured by Husqvarna to exact standards and is compatible with many engines made by the brand. These engines are found in lawn tractors from brands like RYOBI, Weed Eater, Poulan, and Jonsered, as well. Allow the engine to cool completely and disable the spark plug(s) before beginning any engine repairs. This durable metal replacement part is sold as an individual unit and additional hardware and accessories are not included.

This replacement part is an idler spindle, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is commonly found in lawn mowers and assists the user in turning the machine in different directions. The idler spindle allows for smooth turns and maneuvers during use. A new idler spindle might be needed if the current ones are damaged or broken in any way. It is possible for this part to become worn down or stripped overtime due to normal wear and tear. If the user noticed that the machine is not turning as smoothly or is unable to rotate the steering of the appliance, it might be time to replace the idler spindle. This replacement part is an OEM part sourced directly from the manufacturer. This idler spindle is sold individually. Be sure to purchase the correct amount as some appliances require more than one.

This replacement part is a brake arm. It is a genuine replacement part made by Husqvarna. This brake arm is commonly found in different types of lawnmowers and allows the user to control the brake settings. This is an extremely important part of the lawnmower.A new brake arm might be needed if the current one is no longer connected to the machine. If the brake arm is damaged in any way, it might be difficult to operate the machine appropriately. If this is the case, it is recommended that the current part be replaced immediately. Be sure to wear working gloves during this repair. This part is sourced directly from the manufacturer and is a genuine OEM replacement part to ensure long-lasting use. This part is sold individually and is meant to fit different lawnmowers.

This exhaust pipe is a genuine Husqvarna part, sold individually. This exhaust pipe can be used as a replacement part in a lawn mower. The purpose of the exhaust pipe in a lawn mower is to redirect gases and combustion away from the appliance and from the operator.The exhaust pipe in a lawn mower might have to be replaced if it or any component near it shows signs of damage. Signs of damage to the exhaust pipe can include increased or unusual noise coming from the exhaust, reduced fuel economy, strong gasoline odor, hard starting or misfiring engine, or a burning smell from the exhaust. If any of these signs of damage occur, the exhaust pipe should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement sourced directly from the manufacturer. It is sold individually. This exhaust pipe is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This replacement part is a flange nut. This is a genuine replacement part made by Husqvarna. This part is small but important in many types of machinery and appliances. Flange nuts work with other small parts to keep things secure and in place during use. A new flange nut might be needed if the current one is missing or damaged in any way. It is possible that the nut becomes stripped or worn down over time and should be replaced. Be sure the engine is completely powered down before replacing any part. This should be a simple repair and only require common household tools such as a screwdriver or pliers. This part is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure a proper fit and long-lasting use.

This gauge wheel is a genuine Husqvarna part, sold individually. This gauge wheel can be used as a replacement part in a lawn mower. The purpose of a gauge wheel in a lawn mower is to facilitate the depth to which the burrowing mechanism of the lawn mower will set so that various levels of depth can be reached within the soil on the lawn.The gauge wheel of a lawn mower might have to be replaced if it suffers damage that precludes it from setting the correct depth for boring. The gauge wheel could be dented, punctured, torn, ripped, eroded, or otherwise damaged in a way that prevents it from serving its function, in which case the component should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This gauge wheel is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

Attaching to the front lift link, this washer is a component for use with lawn tractors. A washer is a component that is used with a screw fastener. Its purpose is to keep the screw from loosening by distributing the load over a larger area. A new washer may be needed if the user has mistakenly misplaced the original. When dealing with small parts, it's a good idea to place them in a container so that they are not lost. The washer could physically break over time due to normal wear and tear. If this is the case, it will need to be replaced so that the screws do not loosen. The repair person may choose to wear gloves to protect his or her hands during the replacement process.This washer is sold individually. It is an OEM part that is sourced directly from the manufacturer. It's compatible with lawn tractors that are manufactured by the Husqvarna, Poulan, and Craftsman brands.

This replacement part is a flange nut. It is a fastening component used in conjunction with a screw or bolt to secure parts within equipment.A new flange nut might be needed if the current one has been stripped by overtightening. Small parts like this one may experience enough friction to be worn down with extended use. Be sure to wear work gloves when replacing small parts and working near the engine. This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.