Kenneth C Oliver Springs , TN March 10, 2017 Circuit board Replace circuit board Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Jack B Fort Worth , TX January 28, 2017 Appliance: Model 790.94338804 Neither the broiler or bake elements put out any heat I checked both elements for continuity and they both had low resistance meaning they were good. I then did a visual inspection of the oven control circuit board and found that resistor R41 had burned completely off the board. After receiving a new board, I took a picture of the wiring connected to board and removed it. I did not buy a new control overlay as mine was still in good shape. I removed it from the old control panel and put it on the new one. Changing out was a piece of cake, I replace the 5 color coded wires after referring to my picture and then the muli-wire plug. I checked all the functions of the stove to conclude that every thing was working Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers
Robert U Sahuarita , AZ January 28, 2017 Bake and broil not working Removed back panel, pulled off wires, replaced with new control panel and overlay(pre-glued and stuck on), plugged wires back in same order, screwed in new control panel and replaced back panel. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Screwdrivers
Walter K Ridgeway , VA December 03, 2016 The oven control board on my kenmore range needed to be replaced It took only 10 minutes to replace the the new part you shipped and the oven works fine. Thank you. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Screwdrivers
Terry T Mullins , WV December 01, 2016 Clock/oven controller went out on my range The service rep helped me decide the part I needed. The how to video made installing the part easy. I got the part quickly and it was about twenty dollars cheaper than from Sears. Very happy. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers
G Brian S Linfield , PA October 23, 2016 Hold down holes on control board broken Took picture with iPad to make sure I put colored wires in correct order after removal removed four screws and unplugged about five wires Installed new board connected wires Done Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Screwdrivers
Martin D Owensboro , KY September 04, 2016 The mother board was bad is what the repair man from kenmore said!!! Frist off the repair man was not even authorized to even come out, and he was mad when I told him that I wasn't paying for something that I didn't authorize because the office messed up, especially after he told me $348.00 for the part and $150.00 labor-annit wrong answer!!! So I found you guys (Appliance parts pros) on line and with your alls help and less then $100.00 bucks, WIFE is happy and now she can fix my meatloaf she promised me!!! Thanks and I will be back as needed, ok thanks a lot folks????. Todd In Ky. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Socket Set
Brian S Manhattan , IL August 17, 2016 Appliance: Model 790902204012 Oven didn't heat Change the oven control board. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Pliers, Screwdrivers
Louise H Winfield , KS January 01, 2016 Oven controller quit working i was getting a f10 notice while heating oven Ordered part which was shipped on Monday. Received it early afternoon on Tuesday. Installation was simple and quick. Oven working properly now. Great service. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Screwdrivers
Mike C Charlotte , NC December 24, 2015 Control board f10'd!! run away heat I contacted customer service cause I didn't find the right part myself, they told me which parts I would need, orederd, received in 2 days as promised and the actual repair took less time than writing this review! 10 screws and 2 plugs later, a whopping 5 min later, stove is like new again, baked up a storm of Christmas cookies as I type!! Thanks for all your help!! Merry Christmas! Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers