How to Troubleshoot & Replace Frigidaire AP4455337 / 318372211 Range 6-Inch Coil Burner Element

Replaced infinite switch on large burners and just went ahead and replaced the infinite switch on the small burners while I had it apart and installed all new surface elements as well...parts were shipped the next day and I received them within 2 days... 

Stove - I replaced all 4 control knob switches, receptacles and heating elements. Dishwasher - I replaced the lid. 

I had one element that would operate wide open when turned on the low setting. It needed the switch replaced. Since I was replacing other elements I went ahead replaced them all, adding new drip pans and wiring kits to each new element. Once I replaced everything I was still having issues with the element that had the switch replaced. After further investigation my AC voltage readings were not correct at this element. I traced the problem back to the Molex connector feeding voltage to the switch. I had three wires that were burnt inside the connector. Not having access to the male and female connectors that go inside the Molex connector, the obvious solution for me was to by pass this connection. I cut the three wires on both sides of the Molex connector and soldered them together, of course using heat shrink over each solder joint. The stove top was reassembled and is now in perfect working order. 

It was very easy & simple to do. Removed the old dirty parts & installed the new. My old stove looks great & I am no longer embarrassed when people are over. The ordering process was simple and painless. The lady on the phone was very professional and knew the materials/products that was being sold/ordered. 

Basic repair any one could do. The parts were all an easy install and a perfect match 

I was disappointed that the packaging did not include "detailed" instructions and then I received this email. Am I delighted!!!!! See burner replacement; Now I'll look for top sheet....Thank you for a great site, I'll surely pace it on with my big mouth. HAPPY HOLIDAYS to y'all and to yours. 

Ordered new original part Replaced - perfect fit 

Replaced all the surface element switches, elements (burners) and drip pans. Also removed door, took apart and cleaned glass window. Looks and works like new. 

My mom initially tried to fix the problem by purchasing GE burners from her range salesman. Both attempts were unsuccessful, the burners were defective and didn't fit the pan correctly. I then tried a burner and pan from my 1998 Frigidaire. It fit and worked well. We decided to replace all of the burners and pans with Frigidaire parts. My mom is happily back to canning and cooking as usual. Very happy AppliacePartsPros was able to assist us. 

A special friend put them in yesterday, thanks for having in stock.