How to Troubleshoot & Replace Ge AP4344856 / WE19M1563 Bkspl. Asm. & Graph.

Ordered the backsplash and it took less than 15 minutes to replace. 

Slide dryer out-away from the wall. Turn it so you can access the back panel. Unplug the dryer..unscrewed the 3 screws on the upper back panel that holds the backsplash in place. Tilted the backsplash forward and released all three switches from the back panel by lifting up (small flathead screwdriver needed), the clip that "locks" the switches in place then carefully turning the switches counterclockwise to release from the backsplash panel. Slid the backsplash panel to the right and removed it. Replaced the new backsplash panel by inserting the tabs and sliding it to the left to "lock" it in place. Installed the 3 switches by carefully inserting them and turning counterclockwise until hearing the "click" which indicated that the switch tab has locked the switch in place. pull back the backsplash to line up the screw holes with the panel on the back of the dryer. Screw in the 3 screws to reattach the backsplash to the back panel of the dryer. 

I replaced the rotary start switch and control panel. The control panel had three screws holding it in place. Once removed, I replaced the rotary start switch and used the other existing switches in the new panel. The fix took less than 15 minutes.The parts were delivered in TWO DAYS and I saved over $80. I would recommend AppliancePartspro.com. 

Spoke with a very polite and knowledgeable service rep who was very precise in making sure I was ordering specifically what I needed. Parts arrived at my home in 4 days. Very pleased with the whole process!